kernel: bump 4.9 to 4.9.85

Signed-off-by: Magnus Kroken <[email protected]>

include/kernel-version.mk

@@ -4,12 +4,12 @@ LINUX_RELEASE?=1
 
 LINUX_VERSION-3.18 = .71
 LINUX_VERSION-4.4 = .112
-LINUX_VERSION-4.9 = .82
+LINUX_VERSION-4.9 = .85
 LINUX_VERSION-4.14 = .23
 
 LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240
 LINUX_KERNEL_HASH-4.4.112 = 544b42cbeed022896115c76a18fc97b4507d5b41d7ac0ce1dce9afd6ffd11ecd
-LINUX_KERNEL_HASH-4.9.82 = 4b710b2701daafeb8e4db4c06f0ed3e62a6d20d6213a4927769c89ae42a9b180
+LINUX_KERNEL_HASH-4.9.85 = 80fe13eee45bd0d5aee6193281dc85dad14500e27d238dc45ebcbcc77cd965c1
 LINUX_KERNEL_HASH-4.14.23 = 9a97b5555a2baaed9aa7711524ae3b9179579efb902d76a814a916aefe5712ca
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -533,6 +533,12 @@ config SPI_QUP
+@@ -534,6 +534,12 @@ config SPI_QUP
  	  This driver can also be built as a module.  If so, the module
  	  will be called spi_qup.
  

target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -761,6 +761,13 @@ config SPI_TLE62X0
+@@ -762,6 +762,13 @@ config SPI_TLE62X0
  	  sysfs interface, with each line presented as a kind of GPIO
  	  exposing both switch control and diagnostic feedback.
  

target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch

@@ -1,6 +1,6 @@
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD
+@@ -769,6 +769,11 @@ config SPI_RB4XX_CPLD
  	  SPI driver for the Xilinx CPLD chip present on the
  	  MikroTik RB4xx boards.
  

target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch

@@ -4629,7 +4629,7 @@ Signed-off-by: Noralf Trønnes <[email protected]>
 +module_exit(fsg_cleanup);
 --- a/drivers/usb/host/Kconfig
 +++ b/drivers/usb/host/Kconfig
-@@ -762,6 +762,19 @@ config USB_HWA_HCD
+@@ -754,6 +754,19 @@ config USB_HWA_HCD
  	  To compile this driver a module, choose M here: the module
  	  will be called "hwa-hc".
  

target/linux/brcm2708/patches-4.9/950-0094-Add-arm64-configuration-and-device-tree-differences.patch

@@ -51,7 +51,7 @@ Tested with raspbian-jessie 2016-09-23.
 +
  config ARCH_SUNXI
  	bool "Allwinner sunxi 64-bit SoC Family"
- 	select GENERIC_IRQ_CHIP
+	select ARCH_HAS_RESET_CONTROLLER
 --- a/arch/arm64/boot/dts/broadcom/Makefile
 +++ b/arch/arm64/boot/dts/broadcom/Makefile
 @@ -1,6 +1,7 @@

target/linux/generic/backport-4.9/011-kbuild-export-SUBARCH.patch

@@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -409,8 +409,8 @@ KERNELRELEASE = $(shell cat include/conf
+@@ -411,8 +411,8 @@ KERNELRELEASE = $(shell cat include/conf
  KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
  
  export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION

target/linux/generic/backport-4.9/090-net-generalize-napi_complete_done.patch

@@ -637,7 +637,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		return received;
 --- a/drivers/net/ethernet/freescale/gianfar.c
 +++ b/drivers/net/ethernet/freescale/gianfar.c
-@@ -3186,7 +3186,7 @@ static int gfar_poll_rx_sq(struct napi_s
+@@ -3193,7 +3193,7 @@ static int gfar_poll_rx_sq(struct napi_s
  
  	if (work_done < budget) {
  		u32 imask;
@@ -646,7 +646,7 @@ Signed-off-by: David S. Miller <[email protected]>
  		/* Clear the halt bit in RSTAT */
  		gfar_write(&regs->rstat, gfargrp->rstat);
  
-@@ -3275,7 +3275,7 @@ static int gfar_poll_rx(struct napi_stru
+@@ -3282,7 +3282,7 @@ static int gfar_poll_rx(struct napi_stru
  
  	if (!num_act_queues) {
  		u32 imask;

target/linux/generic/hack-4.9/202-reduce_module_size.patch

@@ -13,7 +13,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -401,7 +401,7 @@ KBUILD_AFLAGS_KERNEL :=
+@@ -403,7 +403,7 @@ KBUILD_AFLAGS_KERNEL :=
  KBUILD_CFLAGS_KERNEL :=
  KBUILD_AFLAGS_MODULE  := -DMODULE
  KBUILD_CFLAGS_MODULE  := -DMODULE

target/linux/generic/hack-4.9/207-disable-modorder.patch

@@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -1200,7 +1200,6 @@ all: modules
+@@ -1202,7 +1202,6 @@ all: modules
  
  PHONY += modules
  modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
@@ -23,7 +23,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  	@$(kecho) '  Building modules, stage 2.';
  	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
  	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
-@@ -1230,7 +1229,6 @@ _modinst_:
+@@ -1232,7 +1231,6 @@ _modinst_:
  		rm -f $(MODLIB)/build ; \
  		ln -s $(CURDIR) $(MODLIB)/build ; \
  	fi

target/linux/generic/hack-4.9/220-gc_sections.patch

@@ -21,7 +21,7 @@ Signed-off-by: Gabor Juhos <[email protected]>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -404,6 +404,11 @@ KBUILD_CFLAGS_MODULE  := -DMODULE
+@@ -406,6 +406,11 @@ KBUILD_CFLAGS_MODULE  := -DMODULE
  KBUILD_LDFLAGS_MODULE = -T $(srctree)/scripts/module-common.lds $(if $(CONFIG_PROFILING),,-s)
  GCC_PLUGINS_CFLAGS :=
  
@@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <[email protected]>
  # Read KERNELRELEASE from include/config/kernel.release (if it exists)
  KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
  KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -634,11 +639,6 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
+@@ -636,11 +641,6 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
  KBUILD_CFLAGS	+= $(call cc-disable-warning, format-overflow)
  KBUILD_CFLAGS	+= $(call cc-disable-warning, int-in-bool-context)
  

target/linux/generic/pending-4.9/201-extra_optimization.patch

@@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -640,12 +640,12 @@ KBUILD_CFLAGS	+= $(call cc-option,-fdata
+@@ -642,12 +642,12 @@ KBUILD_CFLAGS	+= $(call cc-option,-fdata
  endif
  
  ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE

target/linux/generic/pending-4.9/812-pci-dwc-fix-enumeration.patch

@@ -47,8 +47,6 @@ Will send separate patches to stable as this file got moved/renamed
  drivers/pci/host/pcie-designware.c | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
-index bf558df5b7b3..2b5470173196 100644
 --- a/drivers/pci/host/pcie-designware.c
 +++ b/drivers/pci/host/pcie-designware.c
 @@ -861,7 +861,7 @@ void dw_pcie_setup_rc(struct pcie_port *

target/linux/generic/pending-4.9/890-uart_optional_sysrq.patch

@@ -26,7 +26,7 @@ Signed-off-by: Felix Fietkau <[email protected]>
  {
 --- a/lib/Kconfig.debug
 +++ b/lib/Kconfig.debug
-@@ -397,6 +397,11 @@ config MAGIC_SYSRQ_DEFAULT_ENABLE
+@@ -396,6 +396,11 @@ config MAGIC_SYSRQ_DEFAULT_ENABLE
  	  This may be set to 1 or 0 to enable or disable them all, or
  	  to a bitmask as described in Documentation/sysrq.txt.
  

target/linux/ipq806x/patches-4.9/0074-ipq806x-usb-Control-USB-master-reset.patch

@@ -35,7 +35,7 @@ Signed-off-by: Vasudevan Murugesan <[email protected]>
  };
  
  static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
-@@ -100,6 +103,20 @@ static int dwc3_of_simple_probe(struct p
+@@ -102,6 +105,20 @@ static int dwc3_of_simple_probe(struct p
  	if (ret)
  		return ret;
  
@@ -56,7 +56,7 @@ Signed-off-by: Vasudevan Murugesan <[email protected]>
  	ret = of_platform_populate(np, NULL, NULL, dev);
  	if (ret) {
  		for (i = 0; i < simple->num_clocks; i++) {
-@@ -128,6 +145,12 @@ static int dwc3_of_simple_remove(struct
+@@ -130,6 +147,12 @@ static int dwc3_of_simple_remove(struct
  		clk_put(simple->clks[i]);
  	}
  

target/linux/ipq806x/patches-4.9/820-qcom-ipq4019-Add-IPQ4019-USB-HS-SS-PHY-drivers.patch

@@ -24,7 +24,7 @@ Changed:
 
 --- a/drivers/usb/phy/Kconfig
 +++ b/drivers/usb/phy/Kconfig
-@@ -194,6 +194,17 @@ config USB_MXS_PHY
+@@ -195,6 +195,17 @@ config USB_MXS_PHY
  
  	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
  

target/linux/ipq806x/patches-4.9/830-usb-dwc3-register-qca-ipq4019-dwc3-in-dwc3-of-simple.patch

@@ -15,7 +15,7 @@ Signed-off-by: Christian Lamparter <[email protected]>
 
 --- a/drivers/usb/dwc3/dwc3-of-simple.c
 +++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -197,6 +197,7 @@ static const struct dev_pm_ops dwc3_of_s
+@@ -199,6 +199,7 @@ static const struct dev_pm_ops dwc3_of_s
  
  static const struct of_device_id of_dwc3_simple_match[] = {
  	{ .compatible = "qcom,dwc3" },

target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch

@@ -65,7 +65,7 @@ Signed-off-by: Mark Brown <[email protected]>
 +};
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -403,6 +403,14 @@ config SPI_NUC900
+@@ -404,6 +404,14 @@ config SPI_NUC900
  	help
  	  SPI driver for Nuvoton NUC900 series ARM SoCs
  

target/linux/layerscape/patches-4.9/702-pci-support-layerscape.patch

@@ -2060,7 +2060,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
  	}
 --- a/drivers/pci/quirks.c
 +++ b/drivers/pci/quirks.c
-@@ -4642,3 +4642,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
+@@ -4649,3 +4649,11 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IN
  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid);
  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid);
  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid);

target/linux/layerscape/patches-4.9/817-usb-support-layerscape.patch

@@ -636,7 +636,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
  
 --- a/drivers/usb/dwc3/gadget.c
 +++ b/drivers/usb/dwc3/gadget.c
-@@ -2930,6 +2930,7 @@ static irqreturn_t dwc3_interrupt(int ir
+@@ -2932,6 +2932,7 @@ static irqreturn_t dwc3_interrupt(int ir
  int dwc3_gadget_init(struct dwc3 *dwc)
  {
  	int ret, irq;
@@ -644,7 +644,7 @@ Signed-off-by: Yangbo Lu <[email protected]>
  	struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
  
  	irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
-@@ -3044,6 +3045,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
+@@ -3046,6 +3047,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
  		goto err5;
  	}
  

target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch

@@ -16,7 +16,7 @@ Acked-by: John Crispin <[email protected]>
 
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -533,6 +533,12 @@ config SPI_QUP
+@@ -534,6 +534,12 @@ config SPI_QUP
  	  This driver can also be built as a module.  If so, the module
  	  will be called spi_qup.
  

target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch

@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <[email protected]>
 
 --- a/drivers/spi/Kconfig
 +++ b/drivers/spi/Kconfig
-@@ -539,6 +539,12 @@ config SPI_RT2880
+@@ -540,6 +540,12 @@ config SPI_RT2880
  	help
  	  This selects a driver for the Ralink RT288x/RT305x SPI Controller.
  

target/linux/sunxi/patches-4.9/0001-arm64-sunxi-always-enable-reset-controller.patch

@@ -1,39 +0,0 @@
-From 900a9020af7a023f9b64c919fddf8a7486108962 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <[email protected]>
-Date: Tue, 18 Apr 2017 15:55:51 +0200
-Subject: arm64: sunxi: always enable reset controller
-
-The sunxi clk driver causes a link error when the reset controller
-subsystem is disabled:
-
-drivers/clk/built-in.o: In function `sun4i_ve_clk_setup':
-:(.init.text+0xd040): undefined reference to `reset_controller_register'
-drivers/clk/built-in.o: In function `sun4i_a10_display_init':
-:(.init.text+0xe5e0): undefined reference to `reset_controller_register'
-drivers/clk/built-in.o: In function `sunxi_usb_clk_setup':
-:(.init.text+0x10074): undefined reference to `reset_controller_register'
-
-We already force it to be enabled on arm32 and some other arm64 platforms,
-but not on arm64/sunxi. This adds the respective Kconfig statements to
-also select it here.
-
-Signed-off-by: Arnd Bergmann <[email protected]>
-Acked-by: Maxime Ripard <[email protected]>
----
- arch/arm64/Kconfig.platforms | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/Kconfig.platforms
-+++ b/arch/arm64/Kconfig.platforms
-@@ -2,9 +2,11 @@ menu "Platform selection"
- 
- config ARCH_SUNXI
- 	bool "Allwinner sunxi 64-bit SoC Family"
-+	select ARCH_HAS_RESET_CONTROLLER
- 	select GENERIC_IRQ_CHIP
- 	select PINCTRL
- 	select PINCTRL_SUN50I_A64
-+	select RESET_CONTROLLER
- 	help
- 	  This enables support for Allwinner sunxi based SoCs like the A64.
- 

target/linux/sunxi/patches-4.9/0003-clk-sunxi-ng-Remove-the-use-of-rational-computations.patch

@@ -19,7 +19,7 @@ Acked-by: Chen-Yu Tsai <[email protected]>
 
 --- a/drivers/clk/sunxi-ng/Kconfig
 +++ b/drivers/clk/sunxi-ng/Kconfig
-@@ -35,17 +35,14 @@ config SUNXI_CCU_NK
+@@ -36,17 +36,14 @@ config SUNXI_CCU_NK
  
  config SUNXI_CCU_NKM
  	bool

target/linux/sunxi/patches-4.9/0007-clk-sunxi-ng-Add-A64-clocks.patch

@@ -34,7 +34,7 @@ Signed-off-by: Maxime Ripard <[email protected]>
  - clocks: phandle to the oscillators feeding the CCU. Two are needed:
 --- a/drivers/clk/sunxi-ng/Kconfig
 +++ b/drivers/clk/sunxi-ng/Kconfig
-@@ -53,6 +53,17 @@ config SUNXI_CCU_MP
+@@ -54,6 +54,17 @@ config SUNXI_CCU_MP
  
  # SoC Drivers