treewide: gather DEVICE_VARS into one place

Place DEVICE_VARS assignments at the top of the file or above Device/Default
to make them easier to find.

For ramips, remove redundant values already present in parent file.

Signed-off-by: Sungbo Eo <[email protected]>
[do not touch ar71xx, extend commit message]
Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ath79/image/nand.mk

@@ -1,5 +1,7 @@
 include ./common-netgear.mk	# for netgear-uImage
 
+DEVICE_VARS += RAS_ROOTFS_SIZE RAS_BOARD RAS_VERSION
+
 # attention: only zlib compression is allowed for the boot fs
 define Build/zyxel-buildkerneljffs
 	rm -rf  $(KDIR_TMP)/zyxelnbg6716
@@ -216,4 +218,3 @@ define Device/zyxel_nbg6716
   UBINIZE_OPTS := -E 5
 endef
 TARGET_DEVICES += zyxel_nbg6716
-DEVICE_VARS += RAS_ROOTFS_SIZE RAS_BOARD RAS_VERSION

target/linux/bcm63xx/image/bcm63xx.mk

@@ -3,6 +3,12 @@
 # BCM33XX/BCM63XX Profiles
 #
 
+DEVICE_VARS += HCS_MAGIC_BYTES HCS_REV_MIN HCS_REV_MAJ
+DEVICE_VARS += BLOCK_SIZE FLASH_MB IMAGE_OFFSET
+DEVICE_VARS += CFE_BOARD_ID CFE_CHIP_ID CFE_EXTRAS
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
+DEVICE_VARS += REDBOOT_PREFIX
+
 define Device/bcm33xx
   KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma bin | hcs-initramfs
   IMAGES :=
@@ -10,7 +16,6 @@ define Device/bcm33xx
   HCS_REV_MIN :=
   HCS_REV_MAJ :=
 endef
-DEVICE_VARS += HCS_MAGIC_BYTES HCS_REV_MIN HCS_REV_MAJ
 
 define Device/bcm63xx
   FILESYSTEMS := squashfs jffs2-64k jffs2-128k
@@ -31,8 +36,6 @@ define Device/bcm63xx
   CFE_CHIP_ID :=
   CFE_EXTRAS = --block-size $$(BLOCK_SIZE) --image-offset $$(if $$(IMAGE_OFFSET),$$(IMAGE_OFFSET),$$(BLOCK_SIZE))
 endef
-DEVICE_VARS += BLOCK_SIZE FLASH_MB IMAGE_OFFSET
-DEVICE_VARS += CFE_BOARD_ID CFE_CHIP_ID CFE_EXTRAS
 
 define Device/bcm63xx_netgear
   $(Device/bcm63xx)
@@ -42,7 +45,6 @@ define Device/bcm63xx_netgear
   NETGEAR_BOARD_ID :=
   NETGEAR_REGION :=
 endef
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_REGION
 
 define Device/bcm63xx_redboot
   FILESYSTEMS := squashfs
@@ -52,7 +54,6 @@ define Device/bcm63xx_redboot
   IMAGE/redboot.bin := redboot-bin
   REDBOOT_PREFIX := $$(IMAGE_PREFIX)
 endef
-DEVICE_VARS += REDBOOT_PREFIX
 
 ### Generic ###
 define Device/brcm_bcm963281tan

target/linux/ipq40xx/image/Makefile

@@ -1,8 +1,9 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
-DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION \
-	       WRGG_DEVNAME WRGG_SIGNATURE
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
+DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
 
 define Device/Default
 	PROFILES := Default
@@ -51,7 +52,6 @@ define Device/DniImage
 	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
 	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
 endef
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
 
 define Build/mkmylofw_32m
 	$(eval device_id=$(word 1,$(1)))

target/linux/ipq806x/image/Makefile

@@ -3,6 +3,9 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += TPLINK_BOARD_ID
+
 define Build/buffalo-rootfs-cksum
 	( \
 		echo -ne "\x$$(od -A n -t u1 $@ | tr -s ' ' '\n' | \
@@ -58,7 +61,6 @@ define Device/DniImage
 	IMAGE/factory.img := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | netgear-dni
 	IMAGE/sysupgrade.bin := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-uImage-fakehdr filesystem | sysupgrade-tar kernel=$$$$@ | append-metadata
 endef
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
 
 define Device/TpSafeImage
 	KERNEL_SUFFIX := -uImage
@@ -69,7 +71,6 @@ define Device/TpSafeImage
 	IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
 	IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | append-metadata
 endef
-DEVICE_VARS += TPLINK_BOARD_ID
 
 define Device/ZyXELImage
 	KERNEL_SUFFIX := -uImage

target/linux/lantiq/image/Makefile

@@ -52,6 +52,7 @@ define Build/fullimage
 	rm [email protected]
 endef
 
+DEVICE_VARS += SIGNATURE MAGIC CRC32_POLY
 DTS_DIR := $(DTS_DIR)/lantiq
 
 # Shared device definition: applies to every defined device
@@ -93,7 +94,6 @@ define Device/lantiqBrnImage
   IMAGES := factory.bin
   IMAGE/factory.bin := mkbrnimg | check-size $$$$(IMAGE_SIZE)
 endef
-DEVICE_VARS += SIGNATURE MAGIC CRC32_POLY
 
 define Device/lantiqFullImage
   KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-offset 4 0

target/linux/lantiq/image/vr9.mk

@@ -1,3 +1,5 @@
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+
 define Device/alphanetworks_asl56026
   DEVICE_VENDOR := Alpha
   DEVICE_MODEL := ASL56026
@@ -199,7 +201,6 @@ define Device/netgear_dm200
   NETGEAR_BOARD_ID := DM200
   NETGEAR_HW_ID := 29765233+8+0+64+0+0
 endef
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
 TARGET_DEVICES += netgear_dm200
 
 define Device/zyxel_p-2812hnu-f1

target/linux/mvebu/image/Makefile

@@ -11,6 +11,7 @@ JFFS2_BLOCKSIZE = 128k
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
+DEVICE_VARS += BOOT_SCRIPT UBOOT
 KERNEL_LOADADDR := 0x00008000
 
 define Build/boot-scr
@@ -96,7 +97,6 @@ define Device/Default
   UBOOT :=
   BOOT_SCRIPT :=
 endef
-DEVICE_VARS += BOOT_SCRIPT UBOOT
 
 define Device/Default-arm64
   BOOT_SCRIPT := generic-arm64

target/linux/omap/image/Makefile

@@ -33,7 +33,6 @@ endef
 
 define Device/Default
   PROFILES := Default
-  DEVICE_VARS :=
   KERNEL_NAME := zImage
   KERNEL := kernel-bin
   IMAGES := sdcard.img.gz

target/linux/ramips/image/mt7621.mk

@@ -7,7 +7,7 @@ include ./common-tp-link.mk
 DEFAULT_SOC := mt7621
 
 KERNEL_DTB += -d21
-DEVICE_VARS += UIMAGE_MAGIC
+DEVICE_VARS += UIMAGE_MAGIC SERCOMM_HWNAME
 
 # The OEM webinterface expects an kernel with initramfs which has the uImage
 # header field ih_name.
@@ -554,7 +554,6 @@ define Device/netgear_sercomm_nand
   DEVICE_VENDOR := NETGEAR
   DEVICE_PACKAGES := kmod-mt7603 kmod-usb3 kmod-usb-ledtrig-usbport wpad-basic
 endef
-DEVICE_VARS += SERCOMM_HWNAME SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
 
 define Device/netgear_r6220
   $(Device/netgear_sercomm_nand)

target/linux/sunxi/image/Makefile

@@ -11,6 +11,7 @@ include $(INCLUDE_DIR)/image.mk
 FAT32_BLOCK_SIZE=1024
 FAT32_BLOCKS=$(shell echo $$(($(CONFIG_SUNXI_SD_BOOT_PARTSIZE)*1024*1024/$(FAT32_BLOCK_SIZE))))
 
+DEVICE_VARS := SUNXI_DTS SUNXI_DTS_DIR
 KERNEL_LOADADDR:=0x40008000
 
 define Build/sunxi-sdcard
@@ -32,7 +33,6 @@ endef
 # why \x00\x00\x00\x00 for zImage-initramfs
 define Device/Default
   PROFILES := Default
-  DEVICE_VARS := SUNXI_DTS SUNXI_DTS_DIR
   KERNEL_NAME := zImage
   KERNEL := kernel-bin | uImage none
   IMAGES := sdcard.img.gz

target/linux/tegra/image/Makefile

@@ -34,6 +34,7 @@ define Build/tegra-sdcard
 endef
 
 DEVICE_VARS += BOOT_SCRIPT UBOOT
+
 define Device/Default
   BOOT_SCRIPT := generic-bootscript
   IMAGES := sdcard.img.gz