qualcommax: ipq807x: move subtarget specific kernel options

Currently, qualcommax target contains the full kernel config for the
ipq807x subtarget, but since I am working on ipq60xx as well it makes
sense to split out the ipq807x specific kernel options to subtarget
config.

ipq60xx will use the same approach and use subtarget config.

Should result in the same end kernel config, verified by comparing the
generated kernel .config.

Signed-off-by: Robert Marko <[email protected]>

target/linux/qualcommax/config-6.1

@@ -52,7 +52,6 @@ CONFIG_ARM_GIC_V3_ITS=y
 CONFIG_ARM_GIC_V3_ITS_PCI=y
 # CONFIG_ARM_MHU_V2 is not set
 CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
 CONFIG_ARM_PSCI_FW=y
 # CONFIG_ARM_QCOM_CPUFREQ_HW is not set
 CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
@@ -135,7 +134,6 @@ CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DTC=y
-CONFIG_DT_IDLE_GENPD=y
 CONFIG_DT_IDLE_STATES=y
 CONFIG_EDAC_SUPPORT=y
 CONFIG_EXCLUSIVE_SYSTEM_RAM=y
@@ -200,7 +198,7 @@ CONFIG_IPQ_APSS_PLL=y
 # CONFIG_IPQ_GCC_4019 is not set
 # CONFIG_IPQ_GCC_6018 is not set
 # CONFIG_IPQ_GCC_806X is not set
-CONFIG_IPQ_GCC_8074=y
+# CONFIG_IPQ_GCC_8074 is not set
 # CONFIG_IPQ_LCC_806X is not set
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_DOMAIN=y
@@ -223,9 +221,7 @@ CONFIG_MDIO_IPQ4019=y
 # CONFIG_MDM_GCC_9615 is not set
 # CONFIG_MDM_LCC_9615 is not set
 CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_HI6421_SPMI is not set
 # CONFIG_MFD_QCOM_RPM is not set
-CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_SYSCON=y
 CONFIG_MIGRATION=y
 CONFIG_MMC=y
@@ -279,7 +275,6 @@ CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
 CONFIG_NVMEM=y
 CONFIG_NVMEM_QCOM_QFPROM=y
 # CONFIG_NVMEM_QCOM_SEC_QFPROM is not set
-# CONFIG_NVMEM_SPMI_SDAM is not set
 CONFIG_NVMEM_SYSFS=y
 CONFIG_NVMEM_U_BOOT_ENV=y
 CONFIG_OF=y
@@ -327,7 +322,7 @@ CONFIG_PHY_QCOM_QUSB2=y
 # CONFIG_PHY_QCOM_USB_SS is not set
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_IPQ6018 is not set
-CONFIG_PINCTRL_IPQ8074=y
+# CONFIG_PINCTRL_IPQ8074 is not set
 CONFIG_PINCTRL_MSM=y
 # CONFIG_PINCTRL_MSM8916 is not set
 # CONFIG_PINCTRL_MSM8976 is not set
@@ -335,7 +330,6 @@ CONFIG_PINCTRL_MSM=y
 # CONFIG_PINCTRL_MSM8996 is not set
 # CONFIG_PINCTRL_MSM8998 is not set
 # CONFIG_PINCTRL_QCM2290 is not set
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 # CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
 # CONFIG_PINCTRL_QCS404 is not set
 # CONFIG_PINCTRL_SC7180 is not set
@@ -348,15 +342,11 @@ CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 # CONFIG_PINCTRL_SM8250 is not set
 # CONFIG_PINCTRL_SM8450 is not set
 CONFIG_PM=y
-# CONFIG_PM8916_WATCHDOG is not set
 CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
 CONFIG_PM_OPP=y
 CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
 CONFIG_POWER_RESET=y
 # CONFIG_POWER_RESET_MSM is not set
-# CONFIG_POWER_RESET_QCOM_PON is not set
 CONFIG_POWER_SUPPLY=y
 CONFIG_PREEMPT_NONE_BUILD=y
 CONFIG_PRINTK_TIME=y
@@ -366,18 +356,16 @@ CONFIG_PTP_1588_CLOCK_OPTIONAL=y
 # CONFIG_QCOM_A53PLL is not set
 # CONFIG_QCOM_AOSS_QMP is not set
 CONFIG_QCOM_APCS_IPC=y
-CONFIG_QCOM_APM=y
+# CONFIG_QCOM_APM is not set
 # CONFIG_QCOM_APR is not set
 CONFIG_QCOM_BAM_DMA=y
 # CONFIG_QCOM_CLK_APCC_MSM8996 is not set
 # CONFIG_QCOM_CLK_APCS_MSM8916 is not set
 # CONFIG_QCOM_CLK_APCS_SDX55 is not set
-# CONFIG_QCOM_COINCELL is not set
 # CONFIG_QCOM_COMMAND_DB is not set
 # CONFIG_QCOM_CPR is not set
 # CONFIG_QCOM_EBI2 is not set
 # CONFIG_QCOM_FASTRPC is not set
-CONFIG_QCOM_GDSC=y
 # CONFIG_QCOM_GENI_SE is not set
 # CONFIG_QCOM_GSBI is not set
 # CONFIG_QCOM_HFPLL is not set
@@ -406,12 +394,9 @@ CONFIG_QCOM_SMP2P=y
 # CONFIG_QCOM_SMSM is not set
 CONFIG_QCOM_SOCINFO=y
 # CONFIG_QCOM_SPM is not set
-CONFIG_QCOM_SPMI_ADC5=y
-# CONFIG_QCOM_SPMI_RRADC is not set
 # CONFIG_QCOM_STATS is not set
 # CONFIG_QCOM_SYSMON is not set
 CONFIG_QCOM_TSENS=y
-CONFIG_QCOM_VADC_COMMON=y
 # CONFIG_QCOM_WCNSS_CTRL is not set
 # CONFIG_QCOM_WCNSS_PIL is not set
 CONFIG_QCOM_WDT=y
@@ -425,15 +410,9 @@ CONFIG_RAS=y
 CONFIG_RATIONAL=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPMI=y
 CONFIG_REGULATOR=y
-CONFIG_REGULATOR_CPR3=y
-# CONFIG_REGULATOR_CPR3_NPU is not set
-CONFIG_REGULATOR_CPR4_APSS=y
+# CONFIG_REGULATOR_CPR3 is not set
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_QCOM_LABIBB is not set
-CONFIG_REGULATOR_QCOM_SPMI=y
-# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
 # CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
 CONFIG_RELOCATABLE=y
 CONFIG_REMOTEPROC=y
@@ -454,7 +433,6 @@ CONFIG_RPMSG_QCOM_SMD=y
 # CONFIG_RPMSG_TTY is not set
 CONFIG_RPS=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PM8XXX=y
 CONFIG_RTC_I2C_AND_SPI=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 # CONFIG_SCHED_CORE is not set
@@ -512,10 +490,6 @@ CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 CONFIG_SPI_MEM=y
 CONFIG_SPI_QUP=y
-CONFIG_SPMI=y
-# CONFIG_SPMI_HISI3670 is not set
-CONFIG_SPMI_MSM_PMIC_ARB=y
-# CONFIG_SPMI_PMIC_CLKDIV is not set
 CONFIG_SRCU=y
 CONFIG_SWIOTLB=y
 CONFIG_SWPHY=y

target/linux/qualcommax/ipq807x/config-default

@@ -0,0 +1,30 @@
+CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
+CONFIG_DT_IDLE_GENPD=y
+CONFIG_IPQ_GCC_8074=y
+# CONFIG_MFD_HI6421_SPMI is not set
+CONFIG_MFD_SPMI_PMIC=y
+# CONFIG_NVMEM_SPMI_SDAM is not set
+CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+# CONFIG_PM8916_WATCHDOG is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+# CONFIG_POWER_RESET_QCOM_PON is not set
+CONFIG_QCOM_APM=y
+# CONFIG_QCOM_COINCELL is not set
+CONFIG_QCOM_GDSC=y
+CONFIG_QCOM_SPMI_ADC5=y
+# CONFIG_QCOM_SPMI_RRADC is not set
+CONFIG_QCOM_VADC_COMMON=y
+CONFIG_REGMAP_SPMI=y
+CONFIG_REGULATOR_CPR3=y
+# CONFIG_REGULATOR_CPR3_NPU is not set
+CONFIG_REGULATOR_CPR4_APSS=y
+# CONFIG_REGULATOR_QCOM_LABIBB is not set
+CONFIG_REGULATOR_QCOM_SPMI=y
+# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
+CONFIG_RTC_DRV_PM8XXX=y
+CONFIG_SPMI=y
+# CONFIG_SPMI_HISI3670 is not set
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_SPMI_PMIC_CLKDIV is not set