upgrade AVR32 to 2.6.24 - sync with 2.6.24.atmel.1

SVN-Revision: 10412

target/linux/avr32/Makefile

@@ -10,7 +10,7 @@ ARCH:=avr32
 BOARD:=avr32
 BOARDNAME:=Atmel AVR32
 FEATURES:=squashfs
-LINUX_VERSION:=2.6.23.1
+LINUX_VERSION:=2.6.24
 
 include $(INCLUDE_DIR)/target.mk
 

target/linux/avr32/config-2.6.23 → target/linux/avr32/config-default

@@ -1,8 +1,9 @@
-CONFIG_AP7000_16_BIT_SMC=y
-# CONFIG_AP7000_32_BIT_SMC is not set
-# CONFIG_AP7000_8_BIT_SMC is not set
+CONFIG_AP700X_16_BIT_SMC=y
+# CONFIG_AP700X_32_BIT_SMC is not set
+# CONFIG_AP700X_8_BIT_SMC is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 # CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATMEL_PWM is not set
 # CONFIG_ATMEL_SSC is not set
 CONFIG_AVR32=y
 CONFIG_BOARD_ATNGW100=y
@@ -11,15 +12,17 @@ CONFIG_BOARD_ATNGW100=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_BT is not set
 CONFIG_CPU_AT32AP7000=y
-CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ is not set
 # CONFIG_CPU_FREQ_DEBUG is not set
 # CONFIG_CPU_FREQ_STAT is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_AT32AP=y
 CONFIG_DW_DMAC=y
@@ -36,6 +39,7 @@ CONFIG_HZ_250=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_LEDS_GPIO=y
 CONFIG_MACB=y
+# CONFIG_MDIO_BITBANG is not set
 # CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_BLKDEVS=y
 # CONFIG_MTD_BLOCK2MTD is not set
@@ -85,6 +89,7 @@ CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
 CONFIG_MTD=y
+# CONFIG_NMI_DEBUGGING is not set
 # CONFIG_OWNERSHIP_TRACE is not set
 CONFIG_PHYS_OFFSET=0x10000000
 CONFIG_PLATFORM_AT32AP=y
@@ -92,6 +97,7 @@ CONFIG_PLATFORM_AT32AP=y
 # CONFIG_RTC is not set
 # CONFIG_SERIAL_8250 is not set
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_ATMEL=y
 # CONFIG_SMSC_PHY is not set