uboot-mediatek: update to v2021.04

Remove patches merged upstream and refresh the remaining ones.
Runtime tested on
 * Bananapi BPi-R64 (eMMC and SD Card)
 * Linksys E8450 (SPI-NAND)
 * Ubiquiti UniFi 6 LR (SPI-NOR)

Signed-off-by: Daniel Golle <[email protected]>

package/boot/uboot-mediatek/Makefile

@@ -1,8 +1,8 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2021.04-rc3
-PKG_HASH:=7c418e07f6065c8761eb2df890bb524d7109864325d8850ddb0c93eb345734f9
+PKG_VERSION:=2021.04
+PKG_HASH:=0d438b1bb5cceb57a18ea2de4a0d51f7be5b05b98717df05938636e0aadfe11a
 PKG_BUILD_DEPENDS:=arm-trusted-firmware-tools/host
 
 include $(INCLUDE_DIR)/u-boot.mk

package/boot/uboot-mediatek/patches/000-mtk-02-configs-RPi2-Disable-EFI-Grub-workaround.patch

@@ -1,21 +0,0 @@
-From 04815ef5a49a9996acacfcb5e18924569f5e1bf5 Mon Sep 17 00:00:00 2001
-From: Matthias Brugger <[email protected]>
-Date: Tue, 16 Feb 2021 20:54:08 +0100
-Subject: [PATCH 02/21] configs: RPi2: Disable EFI Grub workaround
-
-The EFI Grub workaround isn't needed with Grub version 2.04 or higher.
-This version was published over a year ago, so disable the workaround
-to reduce boot time.
-
-Signed-off-by: Matthias Brugger <[email protected]>
----
- configs/rpi_2_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/configs/rpi_2_defconfig
-+++ b/configs/rpi_2_defconfig
-@@ -42,3 +42,4 @@ CONFIG_SYS_WHITE_ON_BLACK=y
- CONFIG_CONSOLE_SCROLL_LINES=10
- CONFIG_PHYS_TO_BUS=y
- CONFIG_OF_LIBFDT_OVERLAY=y
-+# CONFIG_EFI_GRUB_ARM32_WORKAROUND is not set

package/boot/uboot-mediatek/patches/000-mtk-10-mmc-mtk-sd-increase-the-minimum-bus-frequency.patch

@@ -33,6 +33,6 @@ Signed-off-by: Weijie Gao <[email protected]>
 +	if (cfg->f_min < MIN_BUS_CLK)
 +		cfg->f_min = MIN_BUS_CLK;
 +
- 	cfg->f_max = host->src_clk_freq;
+ 	if (cfg->f_max < cfg->f_min || cfg->f_max > host->src_clk_freq)
+ 		cfg->f_max = host->src_clk_freq;
  
- 	cfg->b_max = 1024;

package/boot/uboot-mediatek/patches/000-mtk-12-board-mt7629-enable-compression-of-u-boot-to-reduce-.patch

@@ -17,7 +17,7 @@ Signed-off-by: Weijie Gao <[email protected]>
 
 --- a/Makefile
 +++ b/Makefile
-@@ -1728,6 +1728,9 @@ u-boot-elf.lds: arch/u-boot-elf.lds prep
+@@ -1666,6 +1666,9 @@ u-boot-elf.lds: arch/u-boot-elf.lds prep
  
  ifeq ($(CONFIG_SPL),y)
  spl/u-boot-spl-mtk.bin: spl/u-boot-spl

package/boot/uboot-mediatek/patches/000-mtk-21-mmc-mtk-sd-don-t-ignore-max-frequency-from-device-tr.patch

@@ -1,31 +0,0 @@
-From 4bdab0ea008113dda4e001ab8d6863945000c1b2 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <[email protected]>
-Date: Thu, 11 Mar 2021 14:58:26 +0000
-Subject: [PATCH 21/21] mmc: mtk-sd: don't ignore max-frequency from device
- tree
-
-commit e58e68d9 ("mmc: mtk-sd: assign plat->cfg.f_max with a correct value")
-wrongly assumed that plat->cfg.f_max is always unset at the time
-mscd_drv_probe() is run. This is not true in case max-frequency being
-defined in device tree, as it is then already set by mmc_of_parser()
-in msdc_of_to_plat().
-Only set plat->cfg.f_max to the default maximum value in case it is
-not already set to a sane value.
-
-Signed-off-by: Daniel Golle <[email protected]>
----
- drivers/mmc/mtk-sd.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mmc/mtk-sd.c
-+++ b/drivers/mmc/mtk-sd.c
-@@ -1644,7 +1644,8 @@ static int msdc_drv_probe(struct udevice
- 	if (cfg->f_min < MIN_BUS_CLK)
- 		cfg->f_min = MIN_BUS_CLK;
- 
--	cfg->f_max = host->src_clk_freq;
-+	if (cfg->f_max < cfg->f_min || cfg->f_max > host->src_clk_freq)
-+		cfg->f_max = host->src_clk_freq;
- 
- 	cfg->b_max = 1024;
- 	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;

package/boot/uboot-mediatek/patches/010-ahci-mediatek-fix-missing-dev_err-definition.patch

@@ -1,19 +0,0 @@
-From 7089c413216f1c0e374d71187030fe41ae4b3071 Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <[email protected]>
-Date: Tue, 3 Nov 2020 19:45:30 +0100
-Subject: [PATCH] ahci: mediatek: fix missing dev_err definition
-
----
- drivers/ata/mtk_ahci.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/ata/mtk_ahci.c
-+++ b/drivers/ata/mtk_ahci.c
-@@ -21,6 +21,7 @@
- #include <sata.h>
- #include <scsi.h>
- #include <syscon.h>
-+#include <dm/device_compat.h>
- 
- #define SYS_CFG			0x14
- #define SYS_CFG_SATA_MSK	GENMASK(31, 30)

package/boot/uboot-mediatek/patches/120-use-xz-instead-of-lzma.patch

@@ -1,6 +1,6 @@
 --- a/Makefile
 +++ b/Makefile
-@@ -1008,7 +1008,7 @@ quiet_cmd_pad_cat = CAT     $@
+@@ -1004,7 +1004,7 @@ quiet_cmd_pad_cat = CAT     $@
  cmd_pad_cat = $(cmd_objcopy) && $(append) || { rm -f $@; false; }
  
  quiet_cmd_lzma = LZMA    $@

package/boot/uboot-mediatek/patches/220-cmd-env-readmem.patch

@@ -1,6 +1,6 @@
 --- a/cmd/Kconfig
 +++ b/cmd/Kconfig
-@@ -465,6 +465,12 @@ config CMD_ENV_EXISTS
+@@ -472,6 +472,12 @@ config CMD_ENV_EXISTS
  	  Check if a variable is defined in the environment for use in
  	  shell scripting.
  

package/boot/uboot-mediatek/patches/410-add-linksys-e8450.patch

@@ -334,7 +334,7 @@
 +};
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -996,6 +996,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+@@ -1007,6 +1007,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
  	mt7622-rfb.dtb \
  	mt7623a-unielec-u7623-02-emmc.dtb \
  	mt7622-bananapi-bpi-r64.dtb \