bcm53xx: drop 6.1 support

Drop config and files for Linux 6.1.

Signed-off-by: Mieczyslaw Nalewaj <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16103
Signed-off-by: Robert Marko <[email protected]>

target/linux/bcm53xx/config-6.1

@@ -1,339 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1
-CONFIG_ARM_HAS_GROUP_RELOCS=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_B53=y
-CONFIG_B53_MDIO_DRIVER=y
-CONFIG_B53_SRAB_DRIVER=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_FALLBACK_SPROM=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BCM_CYGNUS_PHY is not set
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BCM_SR_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_BCM_NS2 is not set
-CONFIG_CLK_BCM_NSP=y
-# CONFIG_CLK_BCM_SR is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_CURRENT_POINTER_IN_TPIDRURO=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MISC=y
-CONFIG_DEBUG_UART_8250=y
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_USER=y
-CONFIG_DMA_OPS=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_EXTCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_BCM_XGS_IPROC=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GRO_CELLS=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM2835=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQSTACKS=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KMAP_LOCAL=y
-CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
-# CONFIG_LEDS_BCM63138 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_IPROC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_BRCMNAND_IPROC=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_LINKSYS_NS=y
-CONFIG_MTD_PARSER_TPLINK_SAFELOADER=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_NVMEM_BRCM_NVRAM=y
-CONFIG_NVMEM_LAYOUTS=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_LEDS=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-# CONFIG_PHY_BCM_SR_PCIE is not set
-CONFIG_PHY_BCM_SR_USB=y
-# CONFIG_PHY_BRCM_SATA is not set
-# CONFIG_PHY_NS2_USB_DRD is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IPROC_GPIO is not set
-CONFIG_PINCTRL_NS=y
-# CONFIG_PINCTRL_NS2_MUX is not set
-CONFIG_PREEMPT_NONE_BUILD=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_PWM=y
-CONFIG_PWM_BCM_IPROC=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM_QSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMMON=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y

target/linux/bcm53xx/image/Makefile

@@ -127,9 +127,7 @@ define Build/dwl8610ap-image
 	mv [email protected] $@
 endef
 
-ifneq ($(KERNEL),6.1)
 DTS_DIR := $(DTS_DIR)/broadcom
-endif
 
 DEVICE_VARS += ASUS_PRODUCTID
 DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR

target/linux/bcm53xx/patches-6.1/030-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch

@@ -1,165 +0,0 @@
-From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <[email protected]>
-Date: Wed, 19 Oct 2022 21:34:49 +0200
-Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP
-
-This adds a device tree for the BCM53016-based D-Link DWL-8610AP
-access point wireless router.
-
-The TRX-format partitions had to be named "firmware" due to
-an OpenWrt patch that only accepts parting such nodes if they
-are named "firmware".
-
-Signed-off-by: Linus Walleij <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/Makefile                    |   1 +
- .../boot/dts/bcm53016-dlink-dwl-8610ap.dts    | 131 ++++++++++++++++++
- 2 files changed, 132 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -139,6 +139,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm47094-netgear-r8500.dtb \
- 	bcm47094-phicomm-k3.dtb \
- 	bcm53015-meraki-mr26.dtb \
-+	bcm53016-dlink-dwl-8610ap.dtb \
- 	bcm53016-meraki-mr32.dtb \
- 	bcm94708.dtb \
- 	bcm94709.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-@@ -0,0 +1,131 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "D-Link DWL-8610AP";
-+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
-+
-+	memory@0 {
-+		device_type = "memory";
-+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		power {
-+			function = LED_FUNCTION_POWER;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+			default-state = "on";
-+		};
-+
-+		diag {
-+			/* Actually "diag" unclear what this means */
-+			function = LED_FUNCTION_INDICATOR;
-+			color = <LED_COLOR_ID_RED>;
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+			default-state = "on";
-+			linux,default-trigger = "heartbeat";
-+		};
-+
-+		wlan-2g {
-+			function = LED_FUNCTION_WLAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wlan-5g {
-+			function = LED_FUNCTION_WLAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+
-+		button-reset {
-+			debounce-interval = <100>;
-+			wakeup-source;
-+			linux,code = <KEY_RESTART>;
-+			label = "reset";
-+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
-+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	/*
-+	 * Flash memory at 0x1e000000-0x1fffffff
-+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
-+	 * found attached to the spi_nor SPI controller.
-+	 */
-+	nvram@1e080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1e080000 0x00020000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+
-+		et1macaddr: et1macaddr {
-+		};
-+	};
-+};
-+
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&gmac1 {
-+	nvmem-cells = <&et1macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&spi_nor {
-+	/* Serial SPI NOR Flash MX 25L1606E */
-+	status = "okay";
-+};
-+
-+&nandcs {
-+	/*
-+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
-+	 *
-+	 * This ECC is a bit unorthodox but it is what the stock firmware
-+	 * is using, so to be able to mount the original partitions
-+	 * this is necessary.
-+	 */
-+	nand-ecc-strength = <5>;
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		/* This is named nflash1.trx in CFE */
-+		trx@0 {
-+			label = "firmware";
-+			reg = <0x00000000 0x02800000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		/* This is named nflash1.trx2 in CFE */
-+		trx2@2800000 {
-+			label = "firmware2";
-+			reg = <0x02800000 0x02800000>;
-+			compatible = "brcm,trx";
-+		};
-+
-+		/* This is named nflash1.rwfs in CFE */
-+		free@5000000 {
-+			label = "free";
-+			reg = <0x05000000 0x03000000>;
-+		};
-+	};
-+};

target/linux/bcm53xx/patches-6.1/030-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch

@@ -1,242 +0,0 @@
-From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <[email protected]>
-Date: Mon, 7 Nov 2022 14:41:04 +0100
-Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L
-
-This adds a device tree for the D-Link DIR-890L. This device
-is very similar to D-Link DIR-885L, the differences are detailed
-as a comment in the DTS file.
-
-Signed-off-by: Linus Walleij <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++
- 2 files changed, 212 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -129,6 +129,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-tplink-archer-c9-v1.dtb \
- 	bcm47094-asus-rt-ac88u.dtb \
- 	bcm47094-dlink-dir-885l.dtb \
-+	bcm47094-dlink-dir-890l.dtb \
- 	bcm47094-linksys-panamera.dtb \
- 	bcm47094-luxul-abr-4500.dtb \
- 	bcm47094-luxul-xap-1610.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -0,0 +1,211 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Device tree for D-Link DIR-890L
-+ * D-Link calls this board "WRGAC36"
-+ * this router has the same looks and form factor as D-Link DIR-885L.
-+ *
-+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
-+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
-+ * router/extender switch is mounted (there is an empty mount point on the
-+ * PCB) so this device is a pure router. Also the LAN ports are in the right
-+ * order.
-+ *
-+ * Based on the device tree for DIR-885L
-+ * Copyright (C) 2016 Rafał Miłecki <[email protected]>
-+ * Copyright (C) 2022 Linus Walleij
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch1.dtsi"
-+
-+/ {
-+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "D-Link DIR-890L";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200 earlycon";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x08000000>;
-+	};
-+
-+	leds {
-+		/*
-+		 * LED information is derived from the boot log which
-+		 * conveniently lists all the LEDs.
-+		 */
-+		compatible = "gpio-leds";
-+
-+		power-white {
-+			label = "bcm53xx:white:power";
-+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		wan-white {
-+			label = "bcm53xx:white:wan";
-+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		power-amber {
-+			label = "bcm53xx:amber:power";
-+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		wan-amber {
-+			label = "bcm53xx:amber:wan";
-+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		usb3-white {
-+			label = "bcm53xx:white:usb3";
-+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&xhci_port1>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		usb2-white {
-+			label = "bcm53xx:white:usb2";
-+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		2ghz {
-+			label = "bcm53xx:white:2ghz";
-+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		5ghz {
-+			label = "bcm53xx:white:5ghz";
-+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		button-wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		/* Called "factory reset" in the vendor dmesg */
-+		button-restart {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	/*
-+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
-+	 * 64KB blocks; total size 2MB, same that can be
-+	 * found attached to the spi_nor SPI controller.
-+	 */
-+	nvram@1e1f0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1e1f0000 0x00010000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+};
-+
-+&gmac2 {
-+	/*
-+	 * The NVRAM curiously does not contain a MAC address
-+	 * for et2 so since that is the only ethernet interface
-+	 * actually in use on the platform, we use this et0 MAC
-+	 * address for et2.
-+	 */
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
-+&spi_nor {
-+	status = "okay";
-+};
-+
-+&nandcs {
-+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		/*
-+		 * This is called "nflash" in the vendor kernel with
-+		 * "upgrade" and "rootfs" (probably using OpenWrt
-+		 * splitpart). We call it "firmware" like standard tools
-+		 * assume. The CFE loader contains incorrect information
-+		 * about TRX partitions, ignore this, there are no TRX
-+		 * partitions: this device uses SEAMA.
-+		 */
-+		firmware@0 {
-+			label = "firmware";
-+			reg = <0x00000000 0x08000000>;
-+		};
-+	};
-+};
-+
-+&usb2 {
-+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3_phy {
-+	status = "okay";
-+};
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			reg = <0>;
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			reg = <1>;
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			reg = <2>;
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			reg = <3>;
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			reg = <4>;
-+			label = "wan";
-+		};
-+
-+		port@8 {
-+			reg = <8>;
-+			label = "cpu";
-+			ethernet = <&gmac2>;
-+			phy-mode = "rgmii";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+};

target/linux/bcm53xx/patches-6.1/030-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch

@@ -1,99 +0,0 @@
-From c8ee9f119bfb4244f76c9971c341ec06b49332cd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Tue, 8 Nov 2022 12:07:08 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Correct description of TP-Link partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-TP-Link routers have flash space partitioned according to the partitions
-table. It may look like fixed partitioning but those partitions can be
-actually reorganized. New can be added (or some removed), offsets and
-sizes may change.
-
-Fix DT to use binding for the TP-Link SafeLoader partitioning method.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 25 ++++---------------
- .../boot/dts/bcm4709-tplink-archer-c9-v1.dts  | 25 ++++---------------
- 2 files changed, 10 insertions(+), 40 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -95,30 +95,15 @@
- 	status = "okay";
- 
- 	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
-+		compatible = "tplink,safeloader-partitions";
-+		partitions-table-offset = <0xe50000>;
- 
--		boot@0 {
--			label = "boot";
--			reg = <0x000000 0x040000>;
--			read-only;
--		};
--
--		os-image@100000 {
--			label = "os-image";
--			reg = <0x040000 0x200000>;
-+		partition-os-image {
- 			compatible = "brcm,trx";
- 		};
- 
--		rootfs@240000 {
--			label = "rootfs";
--			reg = <0x240000 0xc00000>;
--		};
--
--		nvram@ff0000 {
--			label = "nvram";
--			reg = <0xff0000 0x010000>;
-+		partition-file-system {
-+			linux,rootfs;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -104,30 +104,15 @@
- 	status = "okay";
- 
- 	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
-+		compatible = "tplink,safeloader-partitions";
-+		partitions-table-offset = <0xe50000>;
- 
--		boot@0 {
--			label = "boot";
--			reg = <0x000000 0x040000>;
--			read-only;
--		};
--
--		os-image@100000 {
--			label = "os-image";
--			reg = <0x040000 0x200000>;
-+		partition-os-image {
- 			compatible = "brcm,trx";
- 		};
- 
--		rootfs@240000 {
--			label = "rootfs";
--			reg = <0x240000 0xc00000>;
--		};
--
--		nvram@ff0000 {
--			label = "nvram";
--			reg = <0xff0000 0x010000>;
-+		partition-file-system {
-+			linux,rootfs;
- 		};
- 	};
- };

target/linux/bcm53xx/patches-6.1/030-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch

@@ -1,1700 +0,0 @@
-From af84101e3f2258a303fa2461ebec0878ce23ea10 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <[email protected]>
-Date: Fri, 25 Nov 2022 15:41:27 +0100
-Subject: [PATCH] ARM: dts: broadcom: align LED node names with dtschema
-
-The node names should be generic and DT schema expects certain pattern:
-
-  bcm4708-asus-rt-ac68u.dtb: leds: 'logo', 'power', 'usb2', 'usb3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
-
-Signed-off-by: Krzysztof Kozlowski <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts   | 15 +++++-----
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts   |  8 +++---
- .../bcm4708-buffalo-wzr-1166dhp-common.dtsi   | 16 +++++------
- .../boot/dts/bcm4708-buffalo-wzr-1750dhp.dts  | 16 +++++------
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts  |  6 ++--
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts  |  2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts   | 10 +++----
- .../arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 10 +++----
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 22 +++++++--------
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts   | 10 +++----
- .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 14 +++++-----
- .../boot/dts/bcm47081-buffalo-wzr-900dhp.dts  | 16 +++++------
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts |  6 ++--
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 20 ++++++-------
- .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 18 ++++++------
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts   |  6 ++--
- .../boot/dts/bcm4709-buffalo-wxr-1900dhp.dts  | 18 ++++++------
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts   | 16 +++++------
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts   | 22 +++++++--------
- .../boot/dts/bcm4709-tplink-archer-c9-v1.dts  | 18 ++++++------
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts  | 12 ++++----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 14 +++++-----
- arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 16 +++++------
- .../boot/dts/bcm47094-linksys-panamera.dts    | 28 +++++++++----------
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts |  4 +--
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts |  6 ++--
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts |  4 +--
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts |  2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 20 ++++++-------
- .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts   | 10 +++----
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts  | 14 +++++-----
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts |  4 +--
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts  | 10 +++----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts      | 14 +++++-----
- .../boot/dts/bcm53016-dlink-dwl-8610ap.dts    |  8 +++---
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts    |  6 ++--
- arch/arm/boot/dts/bcm947189acdbmr.dts         |  6 ++--
- 37 files changed, 223 insertions(+), 224 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -28,40 +28,39 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:blue:usb3";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wan {
-+		led-wan {
- 			label = "bcm53xx:blue:wan";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 		};
- 
--		lan {
-+		led-lan {
- 			label = "bcm53xx:blue:lan";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 		};
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:blue:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		all {
-+		led-all {
- 			label = "bcm53xx:blue:all";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- 		};
- 
--
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:blue:usb2";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -28,24 +28,24 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:blue:usb2";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 		};
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:blue:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		logo {
-+		led-logo {
- 			label = "bcm53xx:white:logo";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:blue:usb3";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -37,7 +37,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		usb {
-+		led-usb {
- 			/* label = "bcm53xx:blue:usb"; */
- 			function = LED_FUNCTION_USB;
- 			color = <LED_COLOR_ID_BLUE>;
-@@ -48,14 +48,14 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		power0 {
-+		led-power0 {
- 			/* label = "bcm53xx:red:power"; */
- 			function = LED_FUNCTION_FAULT;
- 			color = <LED_COLOR_ID_RED>;
- 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		power1 {
-+		led-power1 {
- 			/* label = "bcm53xx:white:power"; */
- 			function = LED_FUNCTION_POWER;
- 			color = <LED_COLOR_ID_WHITE>;
-@@ -63,7 +63,7 @@
- 			linux,default-trigger = "default-on";
- 		};
- 
--		router0 {
-+		led-router0 {
- 			/*  label = "bcm53xx:blue:router"; */
- 			function = LED_FUNCTION_STATUS;
- 			color = <LED_COLOR_ID_BLUE>;
-@@ -71,14 +71,14 @@
- 			linux,default-trigger = "default-on";
- 		};
- 
--		router1 {
-+		led-router1 {
- 			/* label = "bcm53xx:amber:router"; */
- 			function = LED_FUNCTION_STATUS;
- 			color = <LED_COLOR_ID_AMBER>;
- 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan {
-+		led-wan {
- 			/* label = "bcm53xx:blue:wan"; */
- 			function = LED_FUNCTION_WAN;
- 			color = <LED_COLOR_ID_BLUE>;
-@@ -86,14 +86,14 @@
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wireless0 {
-+		led-wireless0 {
- 			/* label = "bcm53xx:blue:wireless"; */
- 			function = LED_FUNCTION_WLAN;
- 			color = <LED_COLOR_ID_BLUE>;
- 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wireless1 {
-+		led-wireless1 {
- 			/* label = "bcm53xx:amber:wireless"; */
- 			function = LED_FUNCTION_WLAN;
- 			color = <LED_COLOR_ID_AMBER>;
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -49,7 +49,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		usb {
-+		led-usb {
- 			label = "bcm53xx:blue:usb";
- 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -58,40 +58,40 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		power0 {
-+		led-power0 {
- 			label = "bcm53xx:red:power";
- 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		power1 {
-+		led-power1 {
- 			label = "bcm53xx:white:power";
- 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		router0 {
-+		led-router0 {
- 			label = "bcm53xx:blue:router";
- 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		router1 {
-+		led-router1 {
- 			label = "bcm53xx:amber:router";
- 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan {
-+		led-wan {
- 			label = "bcm53xx:blue:wan";
- 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wireless0 {
-+		led-wireless0 {
- 			label = "bcm53xx:blue:wireless";
- 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wireless1 {
-+		led-wireless1 {
- 			label = "bcm53xx:amber:wireless";
- 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -23,19 +23,19 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		status {
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -42,7 +42,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		status {
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -29,24 +29,24 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		logo {
-+		led-logo {
- 			label = "bcm53xx:white:logo";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power0 {
-+		led-power0 {
- 			label = "bcm53xx:green:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power1 {
-+		led-power1 {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb {
-+		led-usb {
- 			label = "bcm53xx:blue:usb";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -54,7 +54,7 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		wireless {
-+		led-wireless {
- 			label = "bcm53xx:blue:wireless";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -28,29 +28,29 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		logo {
-+		led-logo {
- 			label = "bcm53xx:white:logo";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power0 {
-+		led-power0 {
- 			label = "bcm53xx:green:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 		};
- 
--		power1 {
-+		led-power1 {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		usb {
-+		led-usb {
- 			label = "bcm53xx:blue:usb";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wireless {
-+		led-wireless {
- 			label = "bcm53xx:blue:wireless";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -28,64 +28,64 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power-white {
-+		led-power-white {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power-amber {
-+		led-power-amber {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:white:usb2";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		usb3-white {
-+		led-usb3-white {
- 			label = "bcm53xx:white:usb3";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&xhci_port1>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		usb3-green {
-+		led-usb3-green {
- 			label = "bcm53xx:green:usb3";
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:white:wps";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		status-red {
-+		led-status-red {
- 			label = "bcm53xx:red:status";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		status-green {
-+		led-status-green {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		status-blue {
-+		led-status-blue {
- 			label = "bcm53xx:blue:status";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan-white {
-+		led-wan-white {
- 			label = "bcm53xx:white:wan";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan-red {
-+		led-wan-red {
- 			label = "bcm53xx:red:wan";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -28,30 +28,30 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:blue:power";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:blue:usb2";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wan {
-+		led-wan {
- 			label = "bcm53xx:blue:wan";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		lan {
-+		led-lan {
- 			label = "bcm53xx:blue:lan";
- 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:blue:usb3";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -49,40 +49,40 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power0 {
-+		led-power0 {
- 			label = "bcm53xx:green:power";
- 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power1 {
-+		led-power1 {
- 			label = "bcm53xx:red:power";
- 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		router0 {
-+		led-router0 {
- 			label = "bcm53xx:green:router";
- 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		router1 {
-+		led-router1 {
- 			label = "bcm53xx:amber:router";
- 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan {
-+		led-wan {
- 			label = "bcm53xx:green:wan";
- 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wireless0 {
-+		led-wireless0 {
- 			label = "bcm53xx:green:wireless";
- 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wireless1 {
-+		led-wireless1 {
- 			label = "bcm53xx:amber:wireless";
- 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -49,45 +49,45 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		usb {
-+		led-usb {
- 			label = "bcm53xx:green:usb";
- 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		power0 {
-+		led-power0 {
- 			label = "bcm53xx:green:power";
- 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power1 {
-+		led-power1 {
- 			label = "bcm53xx:red:power";
- 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		router0 {
-+		led-router0 {
- 			label = "bcm53xx:green:router";
- 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		router1 {
-+		led-router1 {
- 			label = "bcm53xx:amber:router";
- 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan {
-+		led-wan {
- 			label = "bcm53xx:green:wan";
- 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wireless0 {
-+		led-wireless0 {
- 			label = "bcm53xx:green:wireless";
- 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wireless1 {
-+		led-wireless1 {
- 			label = "bcm53xx:amber:wireless";
- 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -23,19 +23,19 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		status {
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -29,62 +29,62 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:green:power";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		lan3 {
-+		led-lan3 {
- 			label = "bcm53xx:green:lan3";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		lan4 {
-+		led-lan4 {
- 			label = "bcm53xx:green:lan4";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		wan {
-+		led-wan {
- 			label = "bcm53xx:green:wan";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		lan2 {
-+		led-lan2 {
- 			label = "bcm53xx:green:lan2";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		usb {
-+		led-usb {
- 			label = "bcm53xx:green:usb";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		status {
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:green:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:green:5ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
- 		};
- 
--		lan1 {
-+		led-lan1 {
- 			label = "bcm53xx:green:lan1";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "none";
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -23,50 +23,50 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:green:2ghz";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		lan {
-+		led-lan {
- 			label = "bcm53xx:green:lan";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		usb2-port1 {
-+		led-usb2-port1 {
- 			label = "bcm53xx:green:usb2-port1";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:green:power";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wan-green {
-+		led-wan-green {
- 			label = "bcm53xx:green:wan";
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:green:wps";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan-amber {
-+		led-wan-amber {
- 			label = "bcm53xx:amber:wan";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:green:5ghz";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		usb2-port2 {
-+		led-usb2-port2 {
- 			label = "bcm53xx:green:usb2-port2";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -28,18 +28,18 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:blue:wps";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 		};
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:blue:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wan {
-+		led-wan {
- 			label = "bcm53xx:red:wan";
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -28,48 +28,48 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		usb {
-+		led-usb {
- 			label = "bcm53xx:green:usb";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		power-amber {
-+		led-power-amber {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		power-white {
-+		led-power-white {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		router-amber {
-+		led-router-amber {
- 			label = "bcm53xx:amber:router";
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		router-white {
-+		led-router-white {
- 			label = "bcm53xx:white:router";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan-amber {
-+		led-wan-amber {
- 			label = "bcm53xx:amber:wan";
- 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan-white {
-+		led-wan-white {
- 			label = "bcm53xx:white:wan";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wireless-amber {
-+		led-wireless-amber {
- 			label = "bcm53xx:amber:wireless";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wireless-white {
-+		led-wireless-white {
- 			label = "bcm53xx:white:wireless";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -28,43 +28,43 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power-white {
-+		led-power-white {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power-amber {
-+		led-power-amber {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:white:5ghz";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:white:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:white:wps";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wireless {
-+		led-wireless {
- 			label = "bcm53xx:white:wireless";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:white:usb3";
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:white:usb2";
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -39,59 +39,59 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power-white {
-+		led-power-white {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power-amber {
-+		led-power-amber {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wan-white {
-+		led-wan-white {
- 			label = "bcm53xx:white:wan";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wan-amber {
-+		led-wan-amber {
- 			label = "bcm53xx:amber:wan";
- 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		5ghz-1 {
-+		led-5ghz-1 {
- 			label = "bcm53xx:white:5ghz-1";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:white:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wireless {
-+		led-wireless {
- 			label = "bcm53xx:white:wireless";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:white:wps";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		5ghz-2 {
-+		led-5ghz-2 {
- 			label = "bcm53xx:white:5ghz-2";
- 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:white:usb3";
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:white:usb2";
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -23,27 +23,27 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		lan {
-+		led-lan {
- 			label = "bcm53xx:blue:lan";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:blue:wps";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:blue:usb3";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -51,24 +51,24 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:blue:usb2";
- 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		wan-blue {
-+		led-wan-blue {
- 			label = "bcm53xx:blue:wan";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		wan-amber {
-+		led-wan-amber {
- 			label = "bcm53xx:amber:wan";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:blue:power";
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -33,37 +33,37 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power {
-+		led-power {
- 			label = "white:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wan-red {
-+		led-wan-red {
- 			label = "red:wan";
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		lan {
-+		led-lan {
- 			label = "white:lan";
- 			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "white:usb2";
- 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ehci_port2>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "white:usb3";
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ehci_port1>, <&xhci_port1>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		wps {
-+		led-wps {
- 			label = "white:wps";
- 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -43,28 +43,28 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power-white {
-+		led-power-white {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wan-white {
-+		led-wan-white {
- 			label = "bcm53xx:white:wan";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 		};
- 
--		power-amber {
-+		led-power-amber {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wan-amber {
-+		led-wan-amber {
- 			label = "bcm53xx:amber:wan";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb3-white {
-+		led-usb3-white {
- 			label = "bcm53xx:white:usb3";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -72,12 +72,12 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:white:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:white:5ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -41,47 +41,47 @@
- 		 */
- 		compatible = "gpio-leds";
- 
--		power-white {
-+		led-power-white {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wan-white {
-+		led-wan-white {
- 			label = "bcm53xx:white:wan";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 		};
- 
--		power-amber {
-+		led-power-amber {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wan-amber {
-+		led-wan-amber {
- 			label = "bcm53xx:amber:wan";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb3-white {
-+		led-usb3-white {
- 			label = "bcm53xx:white:usb3";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&xhci_port1>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		usb2-white {
-+		led-usb2-white {
- 			label = "bcm53xx:white:usb2";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:white:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:white:5ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -52,19 +52,19 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:white:wps";
- 			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:green:usb2";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port2>, <&ehci_port2>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:green:usb3";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -72,58 +72,58 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		power {
-+		led-power {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		wifi-disabled {
-+		led-wifi-disabled {
- 			label = "bcm53xx:amber:wifi-disabled";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wifi-enabled {
-+		led-wifi-enabled {
- 			label = "bcm53xx:white:wifi-enabled";
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		bluebar1 {
-+		led-bluebar1 {
- 			label = "bcm53xx:white:bluebar1";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		bluebar2 {
-+		led-bluebar2 {
- 			label = "bcm53xx:white:bluebar2";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		bluebar3 {
-+		led-bluebar3 {
- 			label = "bcm53xx:white:bluebar3";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
- 		};
- 
--		bluebar4 {
-+		led-bluebar4 {
- 			label = "bcm53xx:white:bluebar4";
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		bluebar5 {
-+		led-bluebar5 {
- 			label = "bcm53xx:white:bluebar5";
- 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		bluebar6 {
-+		led-bluebar6 {
- 			label = "bcm53xx:white:bluebar6";
- 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		bluebar7 {
-+		led-bluebar7 {
- 			label = "bcm53xx:white:bluebar7";
- 			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		bluebar8 {
-+		led-bluebar8 {
- 			label = "bcm53xx:white:bluebar8";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -30,13 +30,13 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		status {
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:green:usb3";
- 			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -23,18 +23,18 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		status	{
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -30,13 +30,13 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		status {
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "timer";
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:green:usb3";
- 			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -25,7 +25,7 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		status	{
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -30,38 +30,38 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power	{
-+		led-power {
- 			label = "bcm53xx:green:power";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		lan3	{
-+		led-lan3 {
- 			label = "bcm53xx:green:lan3";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- 		};
- 
--		lan4	{
-+		led-lan4 {
- 			label = "bcm53xx:green:lan4";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wan	{
-+		led-wan {
- 			label = "bcm53xx:green:wan";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		lan1	{
-+		led-lan1 {
- 			label = "bcm53xx:green:lan1";
- 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- 		};
- 
--		lan2	{
-+		led-lan2 {
- 			label = "bcm53xx:green:lan2";
- 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb3	{
-+		led-usb3 {
- 			label = "bcm53xx:green:usb3";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -69,18 +69,18 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		status	{
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:green:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:green:5ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -33,13 +33,13 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power	{
-+		led-power {
- 			label = "bcm53xx:green:power";
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		usb3	{
-+		led-usb3 {
- 			label = "bcm53xx:green:usb3";
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>,
-@@ -47,18 +47,18 @@
- 			linux,default-trigger = "usbport";
- 		};
- 
--		status	{
-+		led-status {
- 			label = "bcm53xx:green:status";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:green:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:green:5ghz";
- 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -25,38 +25,38 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power0 {
-+		led-power0 {
- 			label = "bcm53xx:white:power";
- 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-on";
- 		};
- 
--		power1 {
-+		led-power1 {
- 			label = "bcm53xx:amber:power";
- 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz-1 {
-+		led-5ghz-1 {
- 			label = "bcm53xx:white:5ghz-1";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 		};
- 
--		5ghz-2 {
-+		led-5ghz-2 {
- 			label = "bcm53xx:white:5ghz-2";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:white:2ghz";
- 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb2 {
-+		led-usb2 {
- 			label = "bcm53xx:white:usb2";
- 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
- 		};
- 
--		usb3 {
-+		led-usb3 {
- 			label = "bcm53xx:white:usb3";
- 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
- 		};
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -23,13 +23,13 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		wlan {
-+		led-wlan {
- 			label = "bcm53xx:blue:wlan";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "default-off";
- 		};
- 
--		system {
-+		led-system {
- 			label = "bcm53xx:green:system";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- 			linux,default-trigger = "timer";
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -20,26 +20,26 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
--	leds {
-+	leds-0 {
- 		compatible = "gpio-leds";
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-off";
- 		};
- 
--		system {
-+		led-system {
- 			label = "bcm53xx:green:system";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "timer";
- 		};
- 	};
- 
--	pcie0_leds {
-+	leds-1 {
- 		compatible = "gpio-leds";
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "default-off";
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -20,37 +20,37 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
--	leds {
-+	leds-0 {
- 		compatible = "gpio-leds";
- 
--		usb {
-+		led-usb {
- 			label = "bcm53xx:blue:usb";
- 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
- 			trigger-sources = <&ohci_port1>, <&ehci_port1>;
- 			linux,default-trigger = "usbport";
- 		};
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:blue:wps";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		system {
-+		led-system {
- 			label = "bcm53xx:blue:system";
- 			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
- 			linux,default-trigger = "timer";
- 		};
- 	};
- 
--	pcie0_leds {
-+	leds-1 {
- 		compatible = "gpio-leds";
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
- 		};
---- a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
-@@ -20,14 +20,14 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		power {
-+		led-power {
- 			function = LED_FUNCTION_POWER;
- 			color = <LED_COLOR_ID_GREEN>;
- 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
- 			default-state = "on";
- 		};
- 
--		diag {
-+		led-diag {
- 			/* Actually "diag" unclear what this means */
- 			function = LED_FUNCTION_INDICATOR;
- 			color = <LED_COLOR_ID_RED>;
-@@ -36,13 +36,13 @@
- 			linux,default-trigger = "heartbeat";
- 		};
- 
--		wlan-2g {
-+		led-wlan-2g {
- 			function = LED_FUNCTION_WLAN;
- 			color = <LED_COLOR_ID_GREEN>;
- 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
- 		};
- 
--		wlan-5g {
-+		led-wlan-5g {
- 			function = LED_FUNCTION_WLAN;
- 			color = <LED_COLOR_ID_GREEN>;
- 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -58,7 +58,7 @@
- 	pwm-leds {
- 		compatible = "pwm-leds";
- 
--		red {
-+		led-0 {
- 			/* SYS-LED 1 - Tricolor */
- 			function = LED_FUNCTION_INDICATOR;
- 			color = <LED_COLOR_ID_RED>;
-@@ -66,7 +66,7 @@
- 			max-brightness = <255>;
- 		};
- 
--		green {
-+		led-1 {
- 			/* SYS-LED 1 - Tricolor */
- 			function = LED_FUNCTION_POWER;
- 			color = <LED_COLOR_ID_GREEN>;
-@@ -74,7 +74,7 @@
- 			max-brightness = <255>;
- 		};
- 
--		blue {
-+		led-2 {
- 			/* SYS-LED 1 - Tricolor */
- 			function = LED_FUNCTION_INDICATOR;
- 			color = <LED_COLOR_ID_BLUE>;
---- a/arch/arm/boot/dts/bcm947189acdbmr.dts
-+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
-@@ -25,17 +25,17 @@
- 	leds {
- 		compatible = "gpio-leds";
- 
--		wps {
-+		led-wps {
- 			label = "bcm53xx:blue:wps";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		5ghz {
-+		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
- 		};
- 
--		2ghz {
-+		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- 		};

target/linux/bcm53xx/patches-6.1/031-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch

@@ -1,487 +0,0 @@
-From 915fac07f053418d0ab9075af64da2872ca8a7f8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Wed, 3 May 2023 14:16:10 +0200
-Subject: [PATCH] =?UTF-8?q?ARM:=20dts:=20BCM5301X:=20Relicense=20Rafa?=
- =?UTF-8?q?=C5=82's=20code=20to=20the=20GPL=202.0+=20/=20MIT?=
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All BCM5301X device DTS files use dual licensing. Try the same for SoC.
-Introduce a new .dtsi file with a proper SPDX tag.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- MAINTAINERS                     |   1 +
- arch/arm/boot/dts/bcm-ns.dtsi   | 202 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 192 +-----------------------------
- 3 files changed, 205 insertions(+), 190 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm-ns.dtsi
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -4063,6 +4063,7 @@ M:	Rafał Miłecki <[email protected]>
- R:	Broadcom internal kernel review list <[email protected]>
- L:	[email protected] (moderated for non-subscribers)
- S:	Maintained
-+F:	arch/arm/boot/dts/bcm-ns.dtsi
- F:	arch/arm/boot/dts/bcm470*
- F:	arch/arm/boot/dts/bcm5301*
- F:	arch/arm/boot/dts/bcm953012*
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -0,0 +1,202 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+
-+#include <dt-bindings/clock/bcm-nsp.h>
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+	axi@18000000 {
-+		compatible = "brcm,bus-axi";
-+		reg = <0x18000000 0x1000>;
-+		ranges = <0x00000000 0x18000000 0x00100000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		chipcommon: chipcommon@0 {
-+			reg = <0x00000000 0x1000>;
-+
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+		};
-+
-+		pcie0: pcie@12000 {
-+			reg = <0x00012000 0x1000>;
-+		};
-+
-+		pcie1: pcie@13000 {
-+			reg = <0x00013000 0x1000>;
-+		};
-+
-+		usb2: usb2@21000 {
-+			reg = <0x00021000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+
-+			interrupt-parent = <&gic>;
-+
-+			ehci: usb@21000 {
-+				#usb-cells = <0>;
-+
-+				compatible = "generic-ehci";
-+				reg = <0x00021000 0x1000>;
-+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+				phys = <&usb2_phy>;
-+
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				ehci_port1: port@1 {
-+					reg = <1>;
-+					#trigger-source-cells = <0>;
-+				};
-+
-+				ehci_port2: port@2 {
-+					reg = <2>;
-+					#trigger-source-cells = <0>;
-+				};
-+			};
-+
-+			ohci: usb@22000 {
-+				#usb-cells = <0>;
-+
-+				compatible = "generic-ohci";
-+				reg = <0x00022000 0x1000>;
-+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				ohci_port1: port@1 {
-+					reg = <1>;
-+					#trigger-source-cells = <0>;
-+				};
-+
-+				ohci_port2: port@2 {
-+					reg = <2>;
-+					#trigger-source-cells = <0>;
-+				};
-+			};
-+		};
-+
-+		usb3: usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+
-+			interrupt-parent = <&gic>;
-+
-+			xhci: usb@23000 {
-+				#usb-cells = <0>;
-+
-+				compatible = "generic-xhci";
-+				reg = <0x00023000 0x1000>;
-+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+				phys = <&usb3_phy>;
-+				phy-names = "usb";
-+
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				xhci_port1: port@1 {
-+					reg = <1>;
-+					#trigger-source-cells = <0>;
-+				};
-+			};
-+		};
-+	};
-+
-+	mdio: mdio@18003000 {
-+		compatible = "brcm,iproc-mdio";
-+		reg = <0x18003000 0x8>;
-+		#size-cells = <0>;
-+		#address-cells = <1>;
-+	};
-+
-+	dmu-bus@1800c000 {
-+		compatible = "simple-bus";
-+		ranges = <0 0x1800c000 0x1000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		cru-bus@100 {
-+			compatible = "brcm,ns-cru", "simple-mfd";
-+			reg = <0x100 0x1a4>;
-+			ranges;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			usb2_phy: phy@164 {
-+				compatible = "brcm,ns-usb2-phy";
-+				reg = <0x164 0x4>;
-+				brcm,syscon-clkset = <&cru_clkset>;
-+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-+				clock-names = "phy-ref-clk";
-+				#phy-cells = <0>;
-+			};
-+
-+			cru_clkset: syscon@180 {
-+				compatible = "brcm,cru-clkset", "syscon";
-+				reg = <0x180 0x4>;
-+			};
-+
-+			pinctrl: pinctrl@1c0 {
-+				compatible = "brcm,bcm4708-pinmux";
-+				reg = <0x1c0 0x24>;
-+				reg-names = "cru_gpio_control";
-+
-+				spi-pins {
-+					groups = "spi_grp";
-+					function = "spi";
-+				};
-+
-+				pinmux_i2c: i2c-pins {
-+					groups = "i2c_grp";
-+					function = "i2c";
-+				};
-+
-+				pinmux_pwm: pwm-pins {
-+					groups = "pwm0_grp", "pwm1_grp",
-+						 "pwm2_grp", "pwm3_grp";
-+					function = "pwm";
-+				};
-+
-+				pinmux_uart1: uart1-pins {
-+					groups = "uart1_grp";
-+					function = "uart1";
-+				};
-+			};
-+
-+			thermal: thermal@2c0 {
-+				compatible = "brcm,ns-thermal";
-+				reg = <0x2c0 0x10>;
-+				#thermal-sensor-cells = <0>;
-+			};
-+		};
-+	};
-+
-+	thermal-zones {
-+		cpu_thermal: cpu-thermal {
-+			polling-delay-passive = <0>;
-+			polling-delay = <1000>;
-+			coefficients = <(-556) 418000>;
-+			thermal-sensors = <&thermal>;
-+
-+			trips {
-+				cpu-crit {
-+					temperature = <125000>;
-+					hysteresis = <0>;
-+					type = "critical";
-+				};
-+			};
-+
-+			cooling-maps {
-+			};
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -8,11 +8,7 @@
-  * Licensed under the GNU/GPL. See COPYING for details.
-  */
- 
--#include <dt-bindings/clock/bcm-nsp.h>
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/input/input.h>
--#include <dt-bindings/interrupt-controller/irq.h>
--#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include "bcm-ns.dtsi"
- 
- / {
- 	#address-cells = <1>;
-@@ -149,12 +145,6 @@
- 	};
- 
- 	axi@18000000 {
--		compatible = "brcm,bus-axi";
--		reg = <0x18000000 0x1000>;
--		ranges = <0x00000000 0x18000000 0x00100000>;
--		#address-cells = <1>;
--		#size-cells = <1>;
--
- 		#interrupt-cells = <1>;
- 		interrupt-map-mask = <0x000fffff 0xffff>;
- 		interrupt-map = 
-@@ -228,108 +218,15 @@
- 			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- 			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- 
--		chipcommon: chipcommon@0 {
--			reg = <0x00000000 0x1000>;
--
--			gpio-controller;
--			#gpio-cells = <2>;
-+		chipcommon@0 {
- 			interrupt-controller;
- 			#interrupt-cells = <2>;
- 		};
- 
--		pcie0: pcie@12000 {
--			reg = <0x00012000 0x1000>;
--		};
--
--		pcie1: pcie@13000 {
--			reg = <0x00013000 0x1000>;
--		};
--
- 		pcie2: pcie@14000 {
- 			reg = <0x00014000 0x1000>;
- 		};
- 
--		usb2: usb2@21000 {
--			reg = <0x00021000 0x1000>;
--
--			#address-cells = <1>;
--			#size-cells = <1>;
--			ranges;
--
--			interrupt-parent = <&gic>;
--
--			ehci: usb@21000 {
--				#usb-cells = <0>;
--
--				compatible = "generic-ehci";
--				reg = <0x00021000 0x1000>;
--				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
--				phys = <&usb2_phy>;
--
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				ehci_port1: port@1 {
--					reg = <1>;
--					#trigger-source-cells = <0>;
--				};
--
--				ehci_port2: port@2 {
--					reg = <2>;
--					#trigger-source-cells = <0>;
--				};
--			};
--
--			ohci: usb@22000 {
--				#usb-cells = <0>;
--
--				compatible = "generic-ohci";
--				reg = <0x00022000 0x1000>;
--				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
--
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				ohci_port1: port@1 {
--					reg = <1>;
--					#trigger-source-cells = <0>;
--				};
--
--				ohci_port2: port@2 {
--					reg = <2>;
--					#trigger-source-cells = <0>;
--				};
--			};
--		};
--
--		usb3: usb3@23000 {
--			reg = <0x00023000 0x1000>;
--
--			#address-cells = <1>;
--			#size-cells = <1>;
--			ranges;
--
--			interrupt-parent = <&gic>;
--
--			xhci: usb@23000 {
--				#usb-cells = <0>;
--
--				compatible = "generic-xhci";
--				reg = <0x00023000 0x1000>;
--				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
--				phys = <&usb3_phy>;
--				phy-names = "usb";
--
--				#address-cells = <1>;
--				#size-cells = <0>;
--
--				xhci_port1: port@1 {
--					reg = <1>;
--					#trigger-source-cells = <0>;
--				};
--			};
--		};
--
- 		gmac0: ethernet@24000 {
- 			reg = <0x24000 0x800>;
- 		};
-@@ -355,13 +252,6 @@
- 		status = "disabled";
- 	};
- 
--	mdio: mdio@18003000 {
--		compatible = "brcm,iproc-mdio";
--		reg = <0x18003000 0x8>;
--		#size-cells = <0>;
--		#address-cells = <1>;
--	};
--
- 	mdio-mux@18003000 {
- 		compatible = "mdio-mux-mmioreg", "mdio-mux";
- 		mdio-parent-bus = <&mdio>;
-@@ -409,18 +299,7 @@
- 	};
- 
- 	dmu-bus@1800c000 {
--		compatible = "simple-bus";
--		ranges = <0 0x1800c000 0x1000>;
--		#address-cells = <1>;
--		#size-cells = <1>;
--
- 		cru-bus@100 {
--			compatible = "brcm,ns-cru", "simple-mfd";
--			reg = <0x100 0x1a4>;
--			ranges;
--			#address-cells = <1>;
--			#size-cells = <1>;
--
- 			lcpll0: clock-controller@100 {
- 				#clock-cells = <1>;
- 				compatible = "brcm,nsp-lcpll0";
-@@ -440,53 +319,6 @@
- 						     "usbclk", "iprocfast",
- 						     "sata1", "sata2";
- 			};
--
--			usb2_phy: phy@164 {
--				compatible = "brcm,ns-usb2-phy";
--				reg = <0x164 0x4>;
--				brcm,syscon-clkset = <&cru_clkset>;
--				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
--				clock-names = "phy-ref-clk";
--				#phy-cells = <0>;
--			};
--
--			cru_clkset: syscon@180 {
--				compatible = "brcm,cru-clkset", "syscon";
--				reg = <0x180 0x4>;
--			};
--
--			pinctrl: pinctrl@1c0 {
--				compatible = "brcm,bcm4708-pinmux";
--				reg = <0x1c0 0x24>;
--				reg-names = "cru_gpio_control";
--
--				spi-pins {
--					groups = "spi_grp";
--					function = "spi";
--				};
--
--				pinmux_i2c: i2c-pins {
--					groups = "i2c_grp";
--					function = "i2c";
--				};
--
--				pinmux_pwm: pwm-pins {
--					groups = "pwm0_grp", "pwm1_grp",
--						 "pwm2_grp", "pwm3_grp";
--					function = "pwm";
--				};
--
--				pinmux_uart1: uart1-pins {
--					groups = "uart1_grp";
--					function = "uart1";
--				};
--			};
--
--			thermal: thermal@2c0 {
--				compatible = "brcm,ns-thermal";
--				reg = <0x2c0 0x10>;
--				#thermal-sensor-cells = <0>;
--			};
- 		};
- 	};
- 
-@@ -557,24 +389,4 @@
- 			};
- 		};
- 	};
--
--	thermal-zones {
--		cpu_thermal: cpu-thermal {
--			polling-delay-passive = <0>;
--			polling-delay = <1000>;
--			coefficients = <(-556) 418000>;
--			thermal-sensors = <&thermal>;
--
--			trips {
--				cpu-crit {
--					temperature = <125000>;
--					hysteresis = <0>;
--					type = "critical";
--				};
--			};
--
--			cooling-maps {
--			};
--		};
--	};
- };

target/linux/bcm53xx/patches-6.1/031-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch

@@ -1,136 +0,0 @@
-From 916553449561c4f0b61c71b751b7bb583f5dddd4 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Wed, 3 May 2023 14:16:11 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Florian's code to the GPL 2.0+
- / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All BCM5301X device DTS files use dual licensing. Try the same for SoC.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm-ns.dtsi   | 36 ++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 39 ---------------------------------
- 2 files changed, 36 insertions(+), 39 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -19,6 +19,8 @@
- 
- 			gpio-controller;
- 			#gpio-cells = <2>;
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
- 		};
- 
- 		pcie0: pcie@12000 {
-@@ -109,6 +111,22 @@
- 				};
- 			};
- 		};
-+
-+		gmac0: ethernet@24000 {
-+			reg = <0x24000 0x800>;
-+		};
-+
-+		gmac1: ethernet@25000 {
-+			reg = <0x25000 0x800>;
-+		};
-+
-+		gmac2: ethernet@26000 {
-+			reg = <0x26000 0x800>;
-+		};
-+
-+		gmac3: ethernet@27000 {
-+			reg = <0x27000 0x800>;
-+		};
- 	};
- 
- 	mdio: mdio@18003000 {
-@@ -118,6 +136,24 @@
- 		#address-cells = <1>;
- 	};
- 
-+	rng: rng@18004000 {
-+		compatible = "brcm,bcm5301x-rng";
-+		reg = <0x18004000 0x14>;
-+	};
-+
-+	srab: ethernet-switch@18007000 {
-+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
-+		reg = <0x18007000 0x1000>;
-+
-+		status = "disabled";
-+
-+		/* ports are defined in board DTS */
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+		};
-+	};
-+
- 	dmu-bus@1800c000 {
- 		compatible = "simple-bus";
- 		ranges = <0 0x1800c000 0x1000>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -218,30 +218,9 @@
- 			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- 			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- 
--		chipcommon@0 {
--			interrupt-controller;
--			#interrupt-cells = <2>;
--		};
--
- 		pcie2: pcie@14000 {
- 			reg = <0x00014000 0x1000>;
- 		};
--
--		gmac0: ethernet@24000 {
--			reg = <0x24000 0x800>;
--		};
--
--		gmac1: ethernet@25000 {
--			reg = <0x25000 0x800>;
--		};
--
--		gmac2: ethernet@26000 {
--			reg = <0x26000 0x800>;
--		};
--
--		gmac3: ethernet@27000 {
--			reg = <0x27000 0x800>;
--		};
- 	};
- 
- 	pwm: pwm@18002000 {
-@@ -322,24 +301,6 @@
- 		};
- 	};
- 
--	srab: ethernet-switch@18007000 {
--		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
--		reg = <0x18007000 0x1000>;
--
--		status = "disabled";
--
--		/* ports are defined in board DTS */
--		ports {
--			#address-cells = <1>;
--			#size-cells = <0>;
--		};
--	};
--
--	rng: rng@18004000 {
--		compatible = "brcm,bcm5301x-rng";
--		reg = <0x18004000 0x14>;
--	};
--
- 	nand_controller: nand-controller@18028000 {
- 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;

target/linux/bcm53xx/patches-6.1/031-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch

@@ -1,249 +0,0 @@
-From b3b3cd885ed39cb4b38319a1c4fa4e41db6fee72 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 15 May 2023 17:19:20 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Hauke's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Hauke to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Cc: Hauke Mehrtens <[email protected]>
-Acked-by: Hauke Mehrtens <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm-ns.dtsi   | 90 +++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 85 -------------------------------
- 2 files changed, 90 insertions(+), 85 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -1,4 +1,7 @@
- // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2013-2014 Hauke Mehrtens <[email protected]>
-+ */
- 
- #include <dt-bindings/clock/bcm-nsp.h>
- #include <dt-bindings/gpio/gpio.h>
-@@ -7,6 +10,81 @@
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- 
- / {
-+	interrupt-parent = <&gic>;
-+	#address-cells = <1>;
-+	#size-cells = <1>;
-+
-+	chipcommon-a-bus@18000000 {
-+		compatible = "simple-bus";
-+		ranges = <0x00000000 0x18000000 0x00001000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		uart0: serial@300 {
-+			compatible = "ns16550";
-+			reg = <0x0300 0x100>;
-+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&iprocslow>;
-+			status = "disabled";
-+		};
-+
-+		uart1: serial@400 {
-+			compatible = "ns16550";
-+			reg = <0x0400 0x100>;
-+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&iprocslow>;
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&pinmux_uart1>;
-+			status = "disabled";
-+		};
-+	};
-+
-+	mpcore-bus@19000000 {
-+		compatible = "simple-bus";
-+		ranges = <0x00000000 0x19000000 0x00023000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		scu@20000 {
-+			compatible = "arm,cortex-a9-scu";
-+			reg = <0x20000 0x100>;
-+		};
-+
-+		timer@20200 {
-+			compatible = "arm,cortex-a9-global-timer";
-+			reg = <0x20200 0x100>;
-+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-+			clocks = <&periph_clk>;
-+		};
-+
-+		timer@20600 {
-+			compatible = "arm,cortex-a9-twd-timer";
-+			reg = <0x20600 0x20>;
-+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-+						  IRQ_TYPE_EDGE_RISING)>;
-+			clocks = <&periph_clk>;
-+		};
-+
-+		gic: interrupt-controller@21000 {
-+			compatible = "arm,cortex-a9-gic";
-+			#interrupt-cells = <3>;
-+			#address-cells = <0>;
-+			interrupt-controller;
-+			reg = <0x21000 0x1000>,
-+			      <0x20100 0x100>;
-+		};
-+
-+		L2: cache-controller@22000 {
-+			compatible = "arm,pl310-cache";
-+			reg = <0x22000 0x1000>;
-+			cache-unified;
-+			arm,shared-override;
-+			prefetch-data = <1>;
-+			prefetch-instr = <1>;
-+			cache-level = <2>;
-+		};
-+	};
-+
- 	axi@18000000 {
- 		compatible = "brcm,bus-axi";
- 		reg = <0x18000000 0x1000>;
-@@ -216,6 +294,18 @@
- 		};
- 	};
- 
-+	nand_controller: nand-controller@18028000 {
-+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-+		reg-names = "nand", "iproc-idm", "iproc-ext";
-+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-+
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		brcm,nand-has-wp;
-+	};
-+
- 	thermal-zones {
- 		cpu_thermal: cpu-thermal {
- 			polling-delay-passive = <0>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -11,41 +11,7 @@
- #include "bcm-ns.dtsi"
- 
- / {
--	#address-cells = <1>;
--	#size-cells = <1>;
--	interrupt-parent = <&gic>;
--
--	chipcommon-a-bus@18000000 {
--		compatible = "simple-bus";
--		ranges = <0x00000000 0x18000000 0x00001000>;
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		uart0: serial@300 {
--			compatible = "ns16550";
--			reg = <0x0300 0x100>;
--			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
--			clocks = <&iprocslow>;
--			status = "disabled";
--		};
--
--		uart1: serial@400 {
--			compatible = "ns16550";
--			reg = <0x0400 0x100>;
--			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
--			clocks = <&iprocslow>;
--			pinctrl-names = "default";
--			pinctrl-0 = <&pinmux_uart1>;
--			status = "disabled";
--		};
--	};
--
- 	mpcore-bus@19000000 {
--		compatible = "simple-bus";
--		ranges = <0x00000000 0x19000000 0x00023000>;
--		#address-cells = <1>;
--		#size-cells = <1>;
--
- 		a9pll: arm_clk@0 {
- 			#clock-cells = <0>;
- 			compatible = "brcm,nsp-armpll";
-@@ -53,26 +19,6 @@
- 			reg = <0x00000 0x1000>;
- 		};
- 
--		scu@20000 {
--			compatible = "arm,cortex-a9-scu";
--			reg = <0x20000 0x100>;
--		};
--
--		timer@20200 {
--			compatible = "arm,cortex-a9-global-timer";
--			reg = <0x20200 0x100>;
--			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
--			clocks = <&periph_clk>;
--		};
--
--		timer@20600 {
--			compatible = "arm,cortex-a9-twd-timer";
--			reg = <0x20600 0x20>;
--			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
--						  IRQ_TYPE_EDGE_RISING)>;
--			clocks = <&periph_clk>;
--		};
--
- 		watchdog@20620 {
- 			compatible = "arm,cortex-a9-twd-wdt";
- 			reg = <0x20620 0x20>;
-@@ -80,25 +26,6 @@
- 						  IRQ_TYPE_EDGE_RISING)>;
- 			clocks = <&periph_clk>;
- 		};
--
--		gic: interrupt-controller@21000 {
--			compatible = "arm,cortex-a9-gic";
--			#interrupt-cells = <3>;
--			#address-cells = <0>;
--			interrupt-controller;
--			reg = <0x21000 0x1000>,
--			      <0x20100 0x100>;
--		};
--
--		L2: cache-controller@22000 {
--			compatible = "arm,pl310-cache";
--			reg = <0x22000 0x1000>;
--			cache-unified;
--			arm,shared-override;
--			prefetch-data = <1>;
--			prefetch-instr = <1>;
--			cache-level = <2>;
--		};
- 	};
- 
- 	pmu {
-@@ -301,18 +228,6 @@
- 		};
- 	};
- 
--	nand_controller: nand-controller@18028000 {
--		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
--		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
--		reg-names = "nand", "iproc-idm", "iproc-ext";
--		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
--
--		#address-cells = <1>;
--		#size-cells = <0>;
--
--		brcm,nand-has-wp;
--	};
--
- 	spi@18029200 {
- 		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
- 		reg = <0x18029200 0x184>,

target/linux/bcm53xx/patches-6.1/031-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch

@@ -1,203 +0,0 @@
-From 3b3e35b279bee5e51580c648399e20323467f58c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 15 May 2023 17:19:21 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL
- 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Those entries were added by:
-1. Hauke in commits dec378827c4a ("ARM: BCM5301X: Add IRQs to Broadcom's
-   bus-axi in DTS file") and 1f80de6863ca ("ARM: BCM5301X: add IRQ
-   numbers for PCIe controller")
-2. Florian in the commit 2cd0c0202f13 ("ARM: dts: BCM5301X: Add SRAB
-   interrupts")
-
-Move them to the bcm-ns.dtsi which uses dual licensing. That syncs more
-Northstar code to be based on the same licensing schema.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Cc: Hauke Mehrtens <[email protected]>
-Cc: Florian Fainelli <[email protected]>
-Acked-by: Hauke Mehrtens <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm-ns.dtsi   | 73 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 75 ---------------------------------
- 2 files changed, 73 insertions(+), 75 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -92,6 +92,79 @@
- 		#address-cells = <1>;
- 		#size-cells = <1>;
- 
-+		#interrupt-cells = <1>;
-+		interrupt-map-mask = <0x000fffff 0xffff>;
-+		interrupt-map =
-+			/* ChipCommon */
-+			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Switch Register Access Block */
-+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* PCIe Controller 0 */
-+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* PCIe Controller 1 */
-+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* PCIe Controller 2 */
-+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* USB 2.0 Controller */
-+			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* USB 3.0 Controller */
-+			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 0 */
-+			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 1 */
-+			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 2 */
-+			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* Ethernet Controller 3 */
-+			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-+
-+			/* NAND Controller */
-+			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+
- 		chipcommon: chipcommon@0 {
- 			reg = <0x00000000 0x1000>;
- 
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -3,8 +3,6 @@
-  * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
-  * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
-  *
-- * Copyright 2013-2014 Hauke Mehrtens <[email protected]>
-- *
-  * Licensed under the GNU/GPL. See COPYING for details.
-  */
- 
-@@ -72,79 +70,6 @@
- 	};
- 
- 	axi@18000000 {
--		#interrupt-cells = <1>;
--		interrupt-map-mask = <0x000fffff 0xffff>;
--		interrupt-map = 
--			/* ChipCommon */
--			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* Switch Register Access Block */
--			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* PCIe Controller 0 */
--			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* PCIe Controller 1 */
--			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* PCIe Controller 2 */
--			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* USB 2.0 Controller */
--			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* USB 3.0 Controller */
--			<0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* Ethernet Controller 0 */
--			<0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* Ethernet Controller 1 */
--			<0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* Ethernet Controller 2 */
--			<0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* Ethernet Controller 3 */
--			<0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
--
--			/* NAND Controller */
--			<0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
--			<0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
--
- 		pcie2: pcie@14000 {
- 			reg = <0x00014000 0x1000>;
- 		};

target/linux/bcm53xx/patches-6.1/031-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch

@@ -1,336 +0,0 @@
-From dfa6570eb5ce2f24059caadbe2ed70034b5337bc Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 15 May 2023 10:33:08 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify MAC addresses on Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use NRAM (NVMEM device) and its "et0macaddr" variable (NVMEM cell) to
-point Ethernet devices to their MAC addresses.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts     | 13 +++++++++++++
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts     | 13 +++++++++++++
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts    | 13 +++++++++++++
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts    | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts    | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts    | 13 +++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts    | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts    | 13 +++++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts    | 11 +++++++++++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts |  5 ++++-
- 10 files changed, 113 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -20,6 +20,14 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -53,6 +61,11 @@
- 	};
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -24,6 +24,14 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+
- 	nand_controller: nand-controller@18028000 {
- 		nand@0 {
- 			partitions {
-@@ -60,6 +68,11 @@
- 	};
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -20,6 +20,14 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -53,6 +61,11 @@
- 	};
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -24,6 +24,10 @@
- 	nvram@1eff0000 {
- 		compatible = "brcm,nvram";
- 		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+			#nvmem-cell-cells = <1>;
-+		};
- 	};
- 
- 	leds {
-@@ -106,6 +110,11 @@
- 	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr 0>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
-@@ -137,6 +146,8 @@
- 		port@4 {
- 			reg = <4>;
- 			label = "wan";
-+			nvmem-cells = <&et0macaddr 5>;
-+			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@5 {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -25,6 +25,10 @@
- 	nvram@1eff0000 {
- 		compatible = "brcm,nvram";
- 		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+			#nvmem-cell-cells = <1>;
-+		};
- 	};
- 
- 	leds {
-@@ -61,6 +65,11 @@
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr 0>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
-@@ -76,6 +85,8 @@
- 		port@0 {
- 			reg = <0>;
- 			label = "wan";
-+			nvmem-cells = <&et0macaddr 1>;
-+			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@1 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -20,6 +20,14 @@
- 		reg = <0x00000000 0x08000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -51,6 +59,11 @@
- 	};
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -25,6 +25,10 @@
- 	nvram@1eff0000 {
- 		compatible = "brcm,nvram";
- 		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+			#nvmem-cell-cells = <1>;
-+		};
- 	};
- 
- 	leds {
-@@ -61,6 +65,11 @@
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr 0>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
-@@ -76,6 +85,8 @@
- 		port@0 {
- 			reg = <0>;
- 			label = "wan";
-+			nvmem-cells = <&et0macaddr 1>;
-+			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@1 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -22,6 +22,14 @@
- 		      <0x88000000 0x18000000>;
- 	};
- 
-+	nvram@1eff0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -47,6 +55,11 @@
- 	status = "okay";
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -25,6 +25,10 @@
- 	nvram@1eff0000 {
- 		compatible = "brcm,nvram";
- 		reg = <0x1eff0000 0x10000>;
-+
-+		et0macaddr: et0macaddr {
-+			#nvmem-cell-cells = <1>;
-+		};
- 	};
- 
- 	leds {
-@@ -101,6 +105,11 @@
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr 0>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
-@@ -136,6 +145,8 @@
- 		port@4 {
- 			reg = <4>;
- 			label = "wan";
-+			nvmem-cells = <&et0macaddr 5>;
-+			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@5 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -27,6 +27,7 @@
- 		reg = <0x1eff0000 0x10000>;
- 
- 		et0macaddr: et0macaddr {
-+			#nvmem-cell-cells = <1>;
- 		};
- 	};
- 
-@@ -76,7 +77,7 @@
- };
- 
- &gmac0 {
--	nvmem-cells = <&et0macaddr>;
-+	nvmem-cells = <&et0macaddr 0>;
- 	nvmem-cell-names = "mac-address";
- };
- 
-@@ -119,6 +120,8 @@
- 		port@4 {
- 			reg = <4>;
- 			label = "wan";
-+			nvmem-cells = <&et0macaddr 5>;
-+			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@5 {

target/linux/bcm53xx/patches-6.1/031-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch

@@ -1,90 +0,0 @@
-From 9d7121f1d2faa0b50bf5b462adcd2dd91970c45e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sat, 20 May 2023 13:26:01 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Use updated device "compatible" strings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar binding was updated to use minus/hyphen char between model and
-version for all devices.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Reviewed-by: Linus Walleij <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts   | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts    | 2 +-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 2 +-
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts  | 2 +-
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts  | 2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts  | 2 +-
- 6 files changed, 6 insertions(+), 6 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -8,7 +8,7 @@
- #include "bcm4708.dtsi"
- 
- / {
--	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-+	compatible = "luxul,xap-1510-v1", "brcm,bcm4708";
- 	model = "Luxul XAP-1510 V1";
- 
- 	chosen {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -13,7 +13,7 @@
- #include "bcm5301x-nand-cs0-bch8.dtsi"
- 
- / {
--	compatible = "netgear,r6250v1", "brcm,bcm4708";
-+	compatible = "netgear,r6250-v1", "brcm,bcm4708";
- 	model = "Netgear R6250 V1 (BCM4708)";
- 
- 	chosen {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -12,7 +12,7 @@
- #include "bcm5301x-nand-cs0-bch8.dtsi"
- 
- / {
--	compatible = "netgear,r6300v2", "brcm,bcm4708";
-+	compatible = "netgear,r6300-v2", "brcm,bcm4708";
- 	model = "Netgear R6300 V2 (BCM4708)";
- 
- 	chosen {
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -8,7 +8,7 @@
- #include "bcm47081.dtsi"
- 
- / {
--	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-+	compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708";
- 	model = "Luxul XAP-1410 V1";
- 
- 	chosen {
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -9,7 +9,7 @@
- #include "bcm5301x-nand-cs0-bch4.dtsi"
- 
- / {
--	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
-+	compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708";
- 	model = "Luxul XWR-1200 V1";
- 
- 	chosen {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -9,7 +9,7 @@
- #include "bcm5301x-nand-cs0-bch4.dtsi"
- 
- / {
--	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
-+	compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708";
- 	model = "Luxul XWR-3100 V1";
- 
- 	chosen {

target/linux/bcm53xx/patches-6.1/031-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch

@@ -1,82 +0,0 @@
-From 04afb51c1dce90051487d3c7b70a1b1b246ce29a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 2 Jun 2023 17:10:23 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Switch away from deprecated properties.
-
-This fixes:
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-sck: False schema does not allow [[6, 7, 0]]
-        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-mosi: False schema does not allow [[6, 4, 0]]
-        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: 'sck-gpios' is a required property
-        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: Unevaluated properties are not allowed ('gpio-mosi', 'gpio-sck' were unexpected)
-        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 4 ++--
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts         | 4 ++--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts        | 4 ++--
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts         | 4 ++--
- 4 files changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -16,8 +16,8 @@
- 	spi {
- 		compatible = "spi-gpio";
- 		num-chipselects = <1>;
--		gpio-sck = <&chipcommon 7 0>;
--		gpio-mosi = <&chipcommon 4 0>;
-+		sck-gpios = <&chipcommon 7 0>;
-+		mosi-gpios = <&chipcommon 4 0>;
- 		cs-gpios = <&chipcommon 6 0>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -28,8 +28,8 @@
- 	spi {
- 		compatible = "spi-gpio";
- 		num-chipselects = <1>;
--		gpio-sck = <&chipcommon 7 0>;
--		gpio-mosi = <&chipcommon 4 0>;
-+		sck-gpios = <&chipcommon 7 0>;
-+		mosi-gpios = <&chipcommon 4 0>;
- 		cs-gpios = <&chipcommon 6 0>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -28,8 +28,8 @@
- 	spi {
- 		compatible = "spi-gpio";
- 		num-chipselects = <1>;
--		gpio-sck = <&chipcommon 7 0>;
--		gpio-mosi = <&chipcommon 4 0>;
-+		sck-gpios = <&chipcommon 7 0>;
-+		mosi-gpios = <&chipcommon 4 0>;
- 		cs-gpios = <&chipcommon 6 0>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -28,8 +28,8 @@
- 	spi {
- 		compatible = "spi-gpio";
- 		num-chipselects = <1>;
--		gpio-sck = <&chipcommon 7 0>;
--		gpio-mosi = <&chipcommon 4 0>;
-+		sck-gpios = <&chipcommon 7 0>;
-+		mosi-gpios = <&chipcommon 4 0>;
- 		cs-gpios = <&chipcommon 6 0>;
- 		#address-cells = <1>;
- 		#size-cells = <0>;

target/linux/bcm53xx/patches-6.1/031-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch

@@ -1,54 +0,0 @@
-From c3acdd4901192bc69dc577012663d5abae21661e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 2 Jun 2023 15:34:54 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid #usb-cells
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Such property simply doesn't exist (is not documented or used anywhere).
-
-This fixes:
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
-        From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
-        From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
-        From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -192,8 +192,6 @@
- 			interrupt-parent = <&gic>;
- 
- 			ehci: usb@21000 {
--				#usb-cells = <0>;
--
- 				compatible = "generic-ehci";
- 				reg = <0x00021000 0x1000>;
- 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-@@ -214,8 +212,6 @@
- 			};
- 
- 			ohci: usb@22000 {
--				#usb-cells = <0>;
--
- 				compatible = "generic-ohci";
- 				reg = <0x00022000 0x1000>;
- 				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-@@ -245,8 +241,6 @@
- 			interrupt-parent = <&gic>;
- 
- 			xhci: usb@23000 {
--				#usb-cells = <0>;
--
- 				compatible = "generic-xhci";
- 				reg = <0x00023000 0x1000>;
- 				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;

target/linux/bcm53xx/patches-6.1/031-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch

@@ -1,31 +0,0 @@
-From 676bf7d062c14191c3fc12f1e36e1f3809041483 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 2 Jun 2023 15:34:55 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32
- keys
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm/boot/dts/bcm53015-meraki-mr26.dtb: keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
-        From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -39,8 +39,6 @@
- 
- 	keys {
- 		compatible = "gpio-keys";
--		#address-cells = <1>;
--		#size-cells = <0>;
- 
- 		key-restart {
- 			label = "Reset";

target/linux/bcm53xx/patches-6.1/031-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch

@@ -1,106 +0,0 @@
-From 1d5682ccc7d6088179b6cfd50a3e3bb6d2b0527e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 5 Jun 2023 08:10:49 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Christian's code to the GPL
- 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Christian to the bcm-ns.dtsi which uses dual
-licensing. That syncs more Northstar code to be based on the same
-licensing schema.
-
-Cc: Christian Lamparter <[email protected]>
-Signed-off-by: Rafał Miłecki <[email protected]>
-Acked-by: Christian Lamparter <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm-ns.dtsi   | 21 +++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 23 -----------------------
- 2 files changed, 21 insertions(+), 23 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -182,6 +182,10 @@
- 			reg = <0x00013000 0x1000>;
- 		};
- 
-+		pcie2: pcie@14000 {
-+			reg = <0x00014000 0x1000>;
-+		};
-+
- 		usb2: usb2@21000 {
- 			reg = <0x00021000 0x1000>;
- 
-@@ -274,6 +278,14 @@
- 		};
- 	};
- 
-+	pwm: pwm@18002000 {
-+		compatible = "brcm,iproc-pwm";
-+		reg = <0x18002000 0x28>;
-+		clocks = <&osc>;
-+		#pwm-cells = <3>;
-+		status = "disabled";
-+	};
-+
- 	mdio: mdio@18003000 {
- 		compatible = "brcm,iproc-mdio";
- 		reg = <0x18003000 0x8>;
-@@ -299,6 +311,15 @@
- 		};
- 	};
- 
-+	uart2: serial@18008000 {
-+		compatible = "ns16550a";
-+		reg = <0x18008000 0x20>;
-+		clocks = <&iprocslow>;
-+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-+		reg-shift = <2>;
-+		status = "disabled";
-+	};
-+
- 	dmu-bus@1800c000 {
- 		compatible = "simple-bus";
- 		ranges = <0 0x1800c000 0x1000>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -69,20 +69,6 @@
- 		};
- 	};
- 
--	axi@18000000 {
--		pcie2: pcie@14000 {
--			reg = <0x00014000 0x1000>;
--		};
--	};
--
--	pwm: pwm@18002000 {
--		compatible = "brcm,iproc-pwm";
--		reg = <0x18002000 0x28>;
--		clocks = <&osc>;
--		#pwm-cells = <3>;
--		status = "disabled";
--	};
--
- 	mdio-mux@18003000 {
- 		compatible = "mdio-mux-mmioreg", "mdio-mux";
- 		mdio-parent-bus = <&mdio>;
-@@ -110,15 +96,6 @@
- 		reg = <0x18105000 0x1000>;
- 	};
- 
--	uart2: serial@18008000 {
--		compatible = "ns16550a";
--		reg = <0x18008000 0x20>;
--		clocks = <&iprocslow>;
--		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
--		reg-shift = <2>;
--		status = "disabled";
--	};
--
- 	i2c0: i2c@18009000 {
- 		compatible = "brcm,iproc-i2c";
- 		reg = <0x18009000 0x50>;

target/linux/bcm53xx/patches-6.1/031-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch

@@ -1,838 +0,0 @@
-From ba4aebce23b2affb810b8a60eae853674d2cded2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 5 Jun 2023 15:21:09 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Describe switch ports in the main DTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All Northstar SoCs have BCM5301x switches (BCM53011, BCM53012) with 8
-ports (0-8 without 6). By design 3 switch ports (5, 7 and 8) are
-hardwired to 3 on-SoC Ethernet interfaces. Switch port 8 requires
-forcing link state.
-
-It seems that global Northstar .dtsi file is the best place to describe
-those hw details. Only device specific bits (like labels) should go to
-device .dts files.
-
-This seems to fit well with a tiny exception of Asus RT-AC88U which
-somehow was designed to have switch 5 connected to an extra switch. This
-case was simply handled with a /delete-property/.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Reviewed-by: Christian Lamparter <[email protected]> (MR32+MR26)
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm-ns.dtsi                 | 41 ++++++++++++++++++-
- .../bcm4708-buffalo-wzr-1166dhp-common.dtsi   |  7 ----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts  |  4 --
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts  |  3 --
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts   |  7 ----
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts |  7 ----
- .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts |  7 ----
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts |  3 --
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts |  7 ----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts   | 12 ------
- arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts  | 17 +-------
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 ------
- arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 12 ------
- .../boot/dts/bcm47094-linksys-panamera.dts    | 34 ++++-----------
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts |  7 ----
- arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts |  4 --
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts |  7 ----
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts |  3 --
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts |  7 ----
- .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts   |  7 ----
- arch/arm/boot/dts/bcm53015-meraki-mr26.dts    |  3 --
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts    |  3 --
- 22 files changed, 51 insertions(+), 163 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -304,10 +304,49 @@
- 
- 		status = "disabled";
- 
--		/* ports are defined in board DTS */
- 		ports {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
-+
-+			port@0 {
-+				reg = <0>;
-+			};
-+
-+			port@1 {
-+				reg = <1>;
-+			};
-+
-+			port@2 {
-+				reg = <2>;
-+			};
-+
-+			port@3 {
-+				reg = <3>;
-+			};
-+
-+			port@4 {
-+				reg = <4>;
-+			};
-+
-+			port@5 {
-+				reg = <5>;
-+				ethernet = <&gmac0>;
-+			};
-+
-+			port@7 {
-+				reg = <7>;
-+				ethernet = <&gmac1>;
-+			};
-+
-+			port@8 {
-+				reg = <8>;
-+				ethernet = <&gmac2>;
-+
-+				fixed-link {
-+					speed = <1000>;
-+					full-duplex;
-+				};
-+			};
- 		};
- 	};
- 
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -159,34 +159,27 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan1";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan2";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan3";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan4";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -75,19 +75,15 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "poe";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "lan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -82,14 +82,11 @@
- 
- 	ports {
- 		port@4 {
--			reg = <4>;
- 			label = "lan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -100,34 +100,27 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan4";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan3";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan1";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -123,34 +123,27 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan4";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan3";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan1";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -123,34 +123,27 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan1";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan2";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan3";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan4";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -75,14 +75,11 @@
- 
- 	ports {
- 		port@4 {
--			reg = <4>;
- 			label = "poe";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -124,36 +124,29 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan4";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan3";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan1";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 			nvmem-cells = <&et0macaddr 5>;
- 			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -191,39 +191,27 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan1";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan2";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan3";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan4";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@8 {
--			reg = <8>;
- 			label = "cpu";
--			ethernet = <&gmac2>;
--
--			fixed-link {
--				speed = <1000>;
--				full-duplex;
--			};
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -181,32 +181,28 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan4";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan3";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan1";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		sw0_p5: port@5 {
--			reg = <5>;
-+			/delete-property/ethernet;
-+
- 			label = "extsw";
- 			phy-mode = "rgmii";
- 
-@@ -218,8 +214,6 @@
- 		};
- 
- 		port@7 {
--			reg = <7>;
--			ethernet = <&gmac1>;
- 			label = "cpu";
- 
- 			fixed-link {
-@@ -229,14 +223,7 @@
- 		};
- 
- 		port@8 {
--			reg = <8>;
--			ethernet = <&gmac2>;
- 			label = "cpu";
--
--			fixed-link {
--				speed = <1000>;
--				full-duplex;
--			};
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -124,39 +124,27 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan4";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan3";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan1";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@8 {
--			reg = <8>;
- 			label = "cpu";
--			ethernet = <&gmac2>;
--
--			fixed-link {
--				speed = <1000>;
--				full-duplex;
--			};
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -172,40 +172,28 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan1";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan2";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan3";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan4";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@8 {
--			reg = <8>;
- 			label = "cpu";
--			ethernet = <&gmac2>;
- 			phy-mode = "rgmii";
--
--			fixed-link {
--				speed = <1000>;
--				full-duplex;
--			};
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -207,29 +207,32 @@
- 	dsa,member = <0 0>;
- 
- 	ports {
-+		sw0_p0: port@0 {
-+			label = "extsw";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
- 		port@1 {
--			reg = <1>;
- 			label = "lan7";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan4";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan8";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
--			ethernet = <&gmac0>;
- 			label = "cpu";
- 			status = "disabled";
- 
-@@ -240,8 +243,6 @@
- 		};
- 
- 		port@7 {
--			reg = <7>;
--			ethernet = <&gmac1>;
- 			label = "cpu";
- 			status = "disabled";
- 
-@@ -252,24 +253,7 @@
- 		};
- 
- 		port@8 {
--			reg = <8>;
--			ethernet = <&gmac2>;
- 			label = "cpu";
--
--			fixed-link {
--				speed = <1000>;
--				full-duplex;
--			};
--		};
--
--		sw0_p0: port@0 {
--			reg = <0>;
--			label = "extsw";
--
--			fixed-link {
--				speed = <1000>;
--				full-duplex;
--			};
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -83,36 +83,29 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "wan";
- 			nvmem-cells = <&et0macaddr 1>;
- 			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan4";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan3";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan2";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "lan1";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -73,19 +73,15 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "poe";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -83,36 +83,29 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "wan";
- 			nvmem-cells = <&et0macaddr 1>;
- 			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan4";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan3";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan2";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "lan1";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -69,14 +69,11 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -123,36 +123,29 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan4";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan3";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan1";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 			nvmem-cells = <&et0macaddr 5>;
- 			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -98,36 +98,29 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "lan4";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan3";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan1";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "wan";
- 			nvmem-cells = <&et0macaddr 5>;
- 			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -115,14 +115,11 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "poe";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 
- 			fixed-link {
- 				speed = <1000>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -176,14 +176,11 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "poe";
- 		};
- 
- 		port@5 {
--			reg = <5>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 
- 			fixed-link {
- 				speed = <1000>;

target/linux/bcm53xx/patches-6.1/031-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch

@@ -1,63 +0,0 @@
-From a6a1a156f5debaebf9f61850d111b966e9be9ee9 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <[email protected]>
-Date: Thu, 8 Jun 2023 17:36:27 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo
- property
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-| bcm53015-meraki-mr26.dtb: nand-controller@18028000:
-|   nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs']
-| From schema: Documentation/[...]/nand-controller.yaml
-| bcm53016-meraki-mr32.dtb: nand-controller@18028000:
-|   nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs']
-| From schema: Documentation/[...]/nand-controller.yaml
-
-original ECC values for these old Merakis are sadly not
-provided by the vendor. It looks like Meraki just stuck
-with what Broadcom's SDK was doing... which left this
-up to the proprietary nand driver.
-
-Note: The invalid setting was and is handled by brcmnand. It
-falls back to "bch" in brcmnand_setup_dev() when ecc.algo is
-set to NAND_ECC_ALGO_UNKNOWN (since "hw" is not in the list
-above).
-
-A correct nand-ecc-algo = "bch"; is already specified in the
-included  "bcm5301x-nand-cs0-bch8.dtsi". So this line can be
-dropped.
-
-Reported-by: Rafał Miłecki <[email protected]> (per Mail)
-Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26")
-Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32")
-Signed-off-by: Christian Lamparter <[email protected]>
-Link: https://lore.kernel.org/r/2c4d00dd40124c2ddc0b139cbce7531b108f9052.1686238550.git.chunkeey@gmail.com
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 --
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 --
- 2 files changed, 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -72,8 +72,6 @@
- };
- 
- &nandcs {
--	nand-ecc-algo = "hw";
--
- 	partitions {
- 		compatible = "fixed-partitions";
- 		#address-cells = <0x1>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -125,8 +125,6 @@
- };
- 
- &nandcs {
--	nand-ecc-algo = "hw";
--
- 	partitions {
- 		/*
- 		 * The partition autodetection does not work for this device.

target/linux/bcm53xx/patches-6.1/031-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch

@@ -1,54 +0,0 @@
-From d68b2f7d7d06872450d4f39d84d5926d7e7ae88c Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <[email protected]>
-Date: Thu, 8 Jun 2023 17:36:28 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: MR32: remove partition index numbers
-
-removes the partition indexes in the node names under.
-This brings the device tree source in line with others.
-
-Signed-off-by: Christian Lamparter <[email protected]>
-Link: https://lore.kernel.org/r/627f57d568030a56499361790524b4d4f3381619.1686238550.git.chunkeey@gmail.com
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -138,31 +138,31 @@
- 		#address-cells = <0x1>;
- 		#size-cells = <0x1>;
- 
--		partition0@0 {
-+		partition@0 {
- 			label = "u-boot";
- 			reg = <0x0 0x100000>;
- 			read-only;
- 		};
- 
--		partition1@100000 {
-+		partition@100000 {
- 			label = "bootkernel1";
- 			reg = <0x100000 0x300000>;
- 			read-only;
- 		};
- 
--		partition2@400000 {
-+		partition@400000 {
- 			label = "nvram";
- 			reg = <0x400000 0x100000>;
- 			read-only;
- 		};
- 
--		partition3@500000 {
-+		partition@500000 {
- 			label = "bootkernel2";
- 			reg = <0x500000 0x300000>;
- 			read-only;
- 		};
- 
--		partition4@800000 {
-+		partition@800000 {
- 			label = "ubi";
- 			reg = <0x800000 0x7780000>;
- 		};

target/linux/bcm53xx/patches-6.1/031-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch

@@ -1,61 +0,0 @@
-From 752a63b8dbe6cc6900efd1035bea427a778a4b55 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 2 Jun 2023 15:59:25 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows setting FullMAC firmware regulatory domain.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 17 +++++++++++++++++
- 1 file changed, 17 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -137,8 +137,10 @@
- 		#size-cells = <2>;
- 
- 		wifi@0,1,0 {
-+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
- 			reg = <0x0000 0 0 0 0>;
- 			ieee80211-freq-limit = <5735000 5835000>;
-+			brcm,ccode-map = "JP-JP-78", "US-Q2-86";
- 		};
- 	};
- };
-@@ -159,6 +161,19 @@
- 			#address-cells = <3>;
- 			#size-cells = <2>;
- 
-+			bridge@1,0 {
-+				reg = <0x800 0 0 0 0>;
-+
-+				#address-cells = <3>;
-+				#size-cells = <2>;
-+
-+				wifi@0,0 {
-+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+					reg = <0x0000 0 0 0 0>;
-+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
-+				};
-+			};
-+
- 			bridge@1,2,2 {
- 				reg = <0x1000 0 0 0 0>;
- 
-@@ -166,8 +181,10 @@
- 				#size-cells = <2>;
- 
- 				wifi@1,4,0 {
-+					compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
- 					reg = <0x0000 0 0 0 0>;
- 					ieee80211-freq-limit = <5170000 5730000>;
-+					brcm,ccode-map = "JP-JP-78", "US-Q2-86";
- 				};
- 			};
- 		};

target/linux/bcm53xx/patches-6.1/031-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch

@@ -1,59 +0,0 @@
-From b67cad33176e472df6d16a24ee7624299bdcd5d5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 16 Jun 2023 12:58:27 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add cells sizes to PCIe nodes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property
-        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property
-        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property
-        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property
-        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property
-        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property
-        From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
-
-Two properties that need to be added later are "device_type" and
-"ranges". Adding "device_type" on its own causes a new warning and the
-value of "ranges" needs to be determined yet.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/bcm-ns.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -176,14 +176,23 @@
- 
- 		pcie0: pcie@12000 {
- 			reg = <0x00012000 0x1000>;
-+
-+			#address-cells = <3>;
-+			#size-cells = <2>;
- 		};
- 
- 		pcie1: pcie@13000 {
- 			reg = <0x00013000 0x1000>;
-+
-+			#address-cells = <3>;
-+			#size-cells = <2>;
- 		};
- 
- 		pcie2: pcie@14000 {
- 			reg = <0x00014000 0x1000>;
-+
-+			#address-cells = <3>;
-+			#size-cells = <2>;
- 		};
- 
- 		usb2: usb2@21000 {

target/linux/bcm53xx/patches-6.1/032-v6.6-0001-ARM-dts-broadcom-add-missing-space-before.patch

@@ -1,37 +0,0 @@
-From 4b8e16de053fc88eac406ad63da2693dd8279043 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <[email protected]>
-Date: Wed, 5 Jul 2023 17:01:07 +0200
-Subject: [PATCH] ARM: dts: broadcom: add missing space before {
-
-Add missing whitespace between node name/label and opening {.
-
-Signed-off-by: Krzysztof Kozlowski <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts | 2 +-
- arch/arm/boot/dts/broadcom/bcm47094-phicomm-k3.dts       | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -279,7 +279,7 @@
- 			reg = <0x080000 0x0100000>;
- 		};
- 
--		partition@180000{
-+		partition@180000 {
- 			label = "devinfo";
- 			reg = <0x0180000 0x080000>;
- 		};
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -55,7 +55,7 @@
- 			reg = <0x0080000 0x0100000>;
- 		};
- 
--		partition@180000{
-+		partition@180000 {
- 			label = "phicomm";
- 			reg = <0x0180000 0x0280000>;
- 			read-only;

target/linux/bcm53xx/patches-6.1/032-v6.6-0002-ARM-dts-BCM5301X-Add-Wi-Fi-regulatory-mappings-for-L.patch

@@ -1,107 +0,0 @@
-From 8960f095de3b80beb3639075f0c8161b6ea98c61 Mon Sep 17 00:00:00 2001
-From: Dan Haab <[email protected]>
-Date: Wed, 5 Jul 2023 09:32:51 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add Wi-Fi regulatory mappings for Luxul
- devices
-
-This allows setting FullMAC firmware regulatory domain.
-
-Signed-off-by: Dan Haab <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../dts/broadcom/bcm47094-luxul-xap-1610.dts  | 37 +++++++++++++++++++
- .../broadcom/bcm47094-luxul-xwr-3150-v1.dts   | 36 ++++++++++++++++++
- 2 files changed, 73 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -64,6 +64,43 @@
- 	nvmem-cell-names = "mac-address";
- };
- 
-+
-+&pcie0 {
-+	#address-cells = <3>;
-+	#size-cells = <2>;
-+
-+	bridge@0,0 {
-+		reg = <0x0000 0 0 0 0>;
-+
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+
-+		wifi@0,0 {
-+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+			reg = <0x0000 0 0 0 0>;
-+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
-+		};
-+	};
-+};
-+
-+&pcie1 {
-+	#address-cells = <3>;
-+	#size-cells = <2>;
-+
-+	bridge@0,0 {
-+		reg = <0x0000 0 0 0 0>;
-+
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+
-+		wifi@0,0 {
-+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+			reg = <0x0000 0 0 0 0>;
-+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
-+		};
-+	};
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -81,6 +81,42 @@
- 	nvmem-cell-names = "mac-address";
- };
- 
-+&pcie0 {
-+	#address-cells = <3>;
-+	#size-cells = <2>;
-+
-+	bridge@0,0 {
-+		reg = <0x0000 0 0 0 0>;
-+
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+
-+		wifi@0,0 {
-+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+			reg = <0x0000 0 0 0 0>;
-+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
-+		};
-+	};
-+};
-+
-+&pcie1 {
-+	#address-cells = <3>;
-+	#size-cells = <2>;
-+
-+	bridge@0,0 {
-+		reg = <0x0000 0 0 0 0>;
-+
-+		#address-cells = <3>;
-+		#size-cells = <2>;
-+
-+		wifi@0,0 {
-+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
-+			reg = <0x0000 0 0 0 0>;
-+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
-+		};
-+	};
-+};
-+
- &usb3 {
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };

target/linux/bcm53xx/patches-6.1/032-v6.6-0003-ARM-dts-BCM5301X-Add-Ethernet-interfaces-links.patch

@@ -1,53 +0,0 @@
-From 2ce61fa62183cf994666fcc911da34075c7183b5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 7 Jul 2023 11:15:19 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add Ethernet interfaces links
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar SoCs have 3 usable Ethernet interfaces each connected to one
-of switch ports. They all use fixed links.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -272,14 +272,32 @@
- 
- 		gmac0: ethernet@24000 {
- 			reg = <0x24000 0x800>;
-+			phy-mode = "internal";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
- 		};
- 
- 		gmac1: ethernet@25000 {
- 			reg = <0x25000 0x800>;
-+			phy-mode = "internal";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
- 		};
- 
- 		gmac2: ethernet@26000 {
- 			reg = <0x26000 0x800>;
-+			phy-mode = "internal";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
- 		};
- 
- 		gmac3: ethernet@27000 {

target/linux/bcm53xx/patches-6.1/032-v6.6-0004-ARM-dts-BCM53573-Drop-nonexistent-default-off-LED-tr.patch

@@ -1,57 +0,0 @@
-From be7e1e5b0f67c58ec4be0a54db23b6a4fa6e2116 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 7 Jul 2023 13:40:01 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Drop nonexistent "default-off" LED
- trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is no such trigger documented or implemented in Linux. It was a
-copy & paste mistake.
-
-This fixes:
-arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: leds: led-wlan:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
-        'default-off' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
-        'default-off' does not match '^cpu[0-9]*$'
-        'default-off' does not match '^hci[0-9]+-power$'
-        'default-off' does not match '^mmc[0-9]+$'
-        'default-off' does not match '^phy[0-9]+tx$'
-        From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 1 -
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts  | 2 --
- 2 files changed, 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -26,7 +26,6 @@
- 		led-wlan {
- 			label = "bcm53xx:blue:wlan";
- 			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
--			linux,default-trigger = "default-off";
- 		};
- 
- 		led-system {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -26,7 +26,6 @@
- 		led-5ghz {
- 			label = "bcm53xx:blue:5ghz";
- 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
--			linux,default-trigger = "default-off";
- 		};
- 
- 		led-system {
-@@ -42,7 +41,6 @@
- 		led-2ghz {
- 			label = "bcm53xx:blue:2ghz";
- 			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
--			linux,default-trigger = "default-off";
- 		};
- 	};
- 

target/linux/bcm53xx/patches-6.1/032-v6.6-0009-ARM-dts-BCM53573-Fix-Ethernet-info-for-Luxul-devices.patch

@@ -1,75 +0,0 @@
-From 44ad8207806973f4e4f7d870fff36cc01f494250 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Thu, 13 Jul 2023 13:11:45 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Fix Ethernet info for Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
-use a non-default design. They don't include switch but have a single
-Ethernet port and BCM54210E PHY connected to the Ethernet controller's
-MDIO bus.
-
-Support for those devices regressed due to two changes:
-
-1. Describing MDIO bus with switch
-After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125
-rev 4 switch") Linux stopped probing for MDIO devices.
-
-2. Dropping hardcoded BCM54210E delays
-In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays
-configuration for BCM54210E") support for other PHY modes was added but
-that requires a proper "phy-mode" value in DT.
-
-Both above changes are correct (they don't need to be reverted or
-anything) but they need this fix for DT data to be correct and for Linux
-to work properly.
-
-Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts   | 13 +++++++++++++
- .../boot/dts/broadcom/bcm47189-luxul-xap-810.dts    | 13 +++++++++++++
- 2 files changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -58,3 +58,16 @@
- 		};
- 	};
- };
-+
-+&gmac0 {
-+	phy-mode = "rgmii";
-+	phy-handle = <&bcm54210e>;
-+
-+	mdio {
-+		/delete-node/ switch@1e;
-+
-+		bcm54210e: ethernet-phy@0 {
-+			reg = <0>;
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -94,3 +94,16 @@
- 		};
- 	};
- };
-+
-+&gmac0 {
-+	phy-mode = "rgmii";
-+	phy-handle = <&bcm54210e>;
-+
-+	mdio {
-+		/delete-node/ switch@1e;
-+
-+		bcm54210e: ethernet-phy@0 {
-+			reg = <0>;
-+		};
-+	};
-+};

target/linux/bcm53xx/patches-6.1/032-v6.6-0010-ARM-dts-bcm5301x-Add-SEAMA-compatibles.patch

@@ -1,36 +0,0 @@
-From 72ec77d74d28be7359ef77971cdee38b60af9e49 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <[email protected]>
-Date: Thu, 13 Jul 2023 00:16:42 +0200
-Subject: [PATCH] ARM: dts: bcm5301x: Add SEAMA compatibles
-
-This adds SEAMA compatibles to the firmware partition of these
-two D-Link devices.
-
-Signed-off-by: Linus Walleij <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 1 +
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -33,6 +33,7 @@
- 				#size-cells = <1>;
- 
- 				partition@0 {
-+					compatible = "seama";
- 					label = "firmware";
- 					reg = <0x00000000 0x08000000>;
- 				};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -149,6 +149,7 @@
- 		 * partitions: this device uses SEAMA.
- 		 */
- 		firmware@0 {
-+			compatible = "seama";
- 			label = "firmware";
- 			reg = <0x00000000 0x08000000>;
- 		};

target/linux/bcm53xx/patches-6.1/032-v6.6-0012-ARM-dts-BCM53573-Describe-BCM53125-switch-ports-in-t.patch

@@ -1,97 +0,0 @@
-From 8d6b61ecad2f1c939813c5c4517d53e04672dc48 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sun, 23 Jul 2023 21:54:15 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Describe BCM53125 switch ports in the
- main DTS
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53125 always has 5 ports with GPHYs (for LAN/WAN ports) and 2 IMP
-ports. It seems the best place to describe that in the main .dtsi.
-Device specific bits can go to device .dts files. This will help
-avoiding some code duplication.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../boot/dts/broadcom/bcm47189-tenda-ac9.dts  |  7 -----
- arch/arm/boot/dts/broadcom/bcm53573.dtsi      | 26 ++++++++++++++++++-
- 2 files changed, 25 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -111,34 +111,27 @@
- 
- 	ports {
- 		port@0 {
--			reg = <0>;
- 			label = "wan";
- 		};
- 
- 		port@1 {
--			reg = <1>;
- 			label = "lan1";
- 		};
- 
- 		port@2 {
--			reg = <2>;
- 			label = "lan2";
- 		};
- 
- 		port@3 {
--			reg = <3>;
- 			label = "lan3";
- 		};
- 
- 		port@4 {
--			reg = <4>;
- 			label = "lan4";
- 		};
- 
- 		port@8 {
--			reg = <8>;
- 			label = "cpu";
--			ethernet = <&gmac0>;
- 		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -192,10 +192,34 @@
- 
- 					status = "disabled";
- 
--					/* ports are defined in board DTS */
- 					ports {
- 						#address-cells = <1>;
- 						#size-cells = <0>;
-+
-+						port@0 {
-+							reg = <0>;
-+						};
-+
-+						port@1 {
-+							reg = <1>;
-+						};
-+
-+						port@2 {
-+							reg = <2>;
-+						};
-+
-+						port@3 {
-+							reg = <3>;
-+						};
-+
-+						port@4 {
-+							reg = <4>;
-+						};
-+
-+						port@8 {
-+							reg = <8>;
-+							ethernet = <&gmac0>;
-+						};
- 					};
- 				};
- 			};

target/linux/bcm53xx/patches-6.1/032-v6.6-0013-ARM-dts-BCM53573-Add-BCM53125-switch-port-5.patch

@@ -1,36 +0,0 @@
-From d95b1caeea194962220db1778ce7fe71cdba788b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sun, 23 Jul 2023 21:54:16 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Add BCM53125 switch port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's connected to the extra Ethernet interface.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm53573.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -216,6 +216,16 @@
- 							reg = <4>;
- 						};
- 
-+						port@5 {
-+							reg = <5>;
-+							ethernet = <&gmac1>;
-+
-+							fixed-link {
-+								speed = <1000>;
-+								full-duplex;
-+							};
-+						};
-+
- 						port@8 {
- 							reg = <8>;
- 							ethernet = <&gmac0>;

target/linux/bcm53xx/patches-6.1/032-v6.6-0014-ARM-dts-BCM53573-Add-Ethernet-interfaces-links.patch

@@ -1,73 +0,0 @@
-From e0ae343a2c1b782a346d9b844ea65e1d49c428b2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 24 Jul 2023 12:12:27 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Add Ethernet interfaces links
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53573 has 2 Ethernet interfaces each connected to one of switch ports
-in the default design. They both use fixed links.
-
-An exception are Luxul XAP devices that have switch replaced by a single
-PHY.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../boot/dts/broadcom/bcm47189-luxul-xap-1440.dts    |  2 ++
- .../arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts |  2 ++
- arch/arm/boot/dts/broadcom/bcm53573.dtsi             | 12 ++++++++++++
- 3 files changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -50,6 +50,8 @@
- 	phy-mode = "rgmii";
- 	phy-handle = <&bcm54210e>;
- 
-+	/delete-node/ fixed-link;
-+
- 	mdio {
- 		/delete-node/ switch@1e;
- 
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -86,6 +86,8 @@
- 	phy-mode = "rgmii";
- 	phy-handle = <&bcm54210e>;
- 
-+	/delete-node/ fixed-link;
-+
- 	mdio {
- 		/delete-node/ switch@1e;
- 
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -181,6 +181,12 @@
- 
- 		gmac0: ethernet@5000 {
- 			reg = <0x5000 0x1000>;
-+			phy-mode = "internal";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
- 
- 			mdio {
- 				#address-cells = <1>;
-@@ -237,6 +243,12 @@
- 
- 		gmac1: ethernet@b000 {
- 			reg = <0xb000 0x1000>;
-+			phy-mode = "internal";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
- 		};
- 
- 		pmu@12000 {

target/linux/bcm53xx/patches-6.1/032-v6.6-0015-ARM-dts-BCM53573-Disable-second-Ethernet-on-Luxul-de.patch

@@ -1,39 +0,0 @@
-From d8835601e3c306fda78f8736f1aef688e99e892d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 24 Jul 2023 12:11:59 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Disable second Ethernet on Luxul devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-XAP-810 and XAP-1440 both have a single Ethernet port and BCM54210E PHY.
-Their second Ethernet interface is not connected to anything.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dts | 4 ++++
- arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-810.dts  | 4 ++++
- 2 files changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -73,3 +73,7 @@
- 		};
- 	};
- };
-+
-+&gmac1 {
-+	status = "disabled";
-+};
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -109,3 +109,7 @@
- 		};
- 	};
- };
-+
-+&gmac1 {
-+	status = "disabled";
-+};

target/linux/bcm53xx/patches-6.1/032-v6.6-0016-ARM-dts-BCM5301X-Add-DT-for-Asus-RT-AC3100.patch

@@ -1,431 +0,0 @@
-From 2900083269f7c0f0ff430bffc6ced2038aed9b6b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <[email protected]>
-Date: Thu, 3 Aug 2023 10:14:54 +0300
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for ASUS RT-AC3100
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ASUS RT-AC3100 is ASUS RT-AC88U without the external switch. Move the
-shared bindings to bcm47094-asus-rt-ac3100.dtsi.
-
-Remove the fixed-link node on port@7 as commit ba4aebce23b2 ("ARM: dts:
-BCM5301X: Describe switch ports in the main DTS") states it's not
-necessary.
-
-Replace the copyright notice with an author notice.
-
-Rename the model name from Asus to ASUS on bcm47094-asus-rt-ac88u.dts.
-
-Signed-off-by: Arınç ÜNAL <[email protected]>
-Reviewed-by: Linus Walleij <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/Makefile           |   1 +
- .../dts/bcm47094-asus-rt-ac3100.dts  |  23 +++
- .../dts/bcm47094-asus-rt-ac3100.dtsi | 163 ++++++++++++++++++
- .../dts/bcm47094-asus-rt-ac88u.dts   | 155 +----------------
- 4 files changed, 190 insertions(+), 152 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dts
- create mode 100644 arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-netgear-r7000.dtb \
- 	bcm4709-netgear-r8000.dtb \
- 	bcm4709-tplink-archer-c9-v1.dtb \
-+	bcm47094-asus-rt-ac3100.dtb \
- 	bcm47094-asus-rt-ac88u.dtb \
- 	bcm47094-dlink-dir-885l.dtb \
- 	bcm47094-dlink-dir-890l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dts
-@@ -0,0 +1,23 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Author: Arınç ÜNAL <[email protected]>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094-asus-rt-ac3100.dtsi"
-+
-+/ {
-+	compatible = "asus,rt-ac3100", "brcm,bcm47094", "brcm,bcm4708";
-+	model = "ASUS RT-AC3100";
-+
-+	nvram@1c080000 {
-+		et0macaddr: et0macaddr {
-+		};
-+	};
-+};
-+
-+&gmac0 {
-+	nvmem-cells = <&et0macaddr>;
-+	nvmem-cell-names = "mac-address";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac3100.dtsi
-@@ -0,0 +1,163 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Author: Arınç ÜNAL <[email protected]>
-+ */
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	chosen {
-+		bootargs = "earlycon";
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x00000000 0x08000000>,
-+		      <0x88000000 0x18000000>;
-+	};
-+
-+	nvram@1c080000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1c080000 0x00180000>;
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-power {
-+			label = "white:power";
-+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+			linux,default-trigger = "default-on";
-+		};
-+
-+		led-wan-red {
-+			label = "red:wan";
-+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		led-lan {
-+			label = "white:lan";
-+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		led-usb2 {
-+			label = "white:usb2";
-+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ehci_port2>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		led-usb3 {
-+			label = "white:usb3";
-+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
-+			linux,default-trigger = "usbport";
-+		};
-+
-+		led-wps {
-+			label = "white:wps";
-+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		button-wps {
-+			label = "WPS";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button-reset {
-+			label = "Reset";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button-wifi {
-+			label = "Wi-Fi";
-+			linux,code = <KEY_RFKILL>;
-+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button-led {
-+			label = "Backlight";
-+			linux,code = <KEY_BRIGHTNESS_ZERO>;
-+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+};
-+
-+&srab {
-+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan4";
-+		};
-+
-+		port@1 {
-+			label = "lan3";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan1";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			label = "cpu";
-+		};
-+
-+		port@8 {
-+			label = "cpu";
-+		};
-+	};
-+};
-+
-+&usb2 {
-+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3_phy {
-+	status = "okay";
-+};
-+
-+&nandcs {
-+	partitions {
-+		compatible = "fixed-partitions";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		partition@0 {
-+			label = "boot";
-+			reg = <0x00000000 0x00080000>;
-+			read-only;
-+		};
-+
-+		partition@80000 {
-+			label = "nvram";
-+			reg = <0x00080000 0x00180000>;
-+		};
-+
-+		partition@200000 {
-+			label = "firmware";
-+			reg = <0x00200000 0x07e00000>;
-+			compatible = "brcm,trx";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
-@@ -1,102 +1,21 @@
- // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
-- * Copyright (C) 2021-2022 Arınç ÜNAL <[email protected]>
-+ * Author: Arınç ÜNAL <[email protected]>
-  */
- 
- /dts-v1/;
- 
--#include "bcm47094.dtsi"
--#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include "bcm47094-asus-rt-ac3100.dtsi"
- 
- / {
- 	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
--	model = "Asus RT-AC88U";
--
--	chosen {
--		bootargs = "earlycon";
--	};
--
--	memory@0 {
--		device_type = "memory";
--		reg = <0x00000000 0x08000000>,
--		      <0x88000000 0x18000000>;
--	};
-+	model = "ASUS RT-AC88U";
- 
- 	nvram@1c080000 {
--		compatible = "brcm,nvram";
--		reg = <0x1c080000 0x00180000>;
--
- 		et1macaddr: et1macaddr {
- 		};
- 	};
- 
--	leds {
--		compatible = "gpio-leds";
--
--		led-power {
--			label = "white:power";
--			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
--			linux,default-trigger = "default-on";
--		};
--
--		led-wan-red {
--			label = "red:wan";
--			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
--		};
--
--		led-lan {
--			label = "white:lan";
--			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
--		};
--
--		led-usb2 {
--			label = "white:usb2";
--			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
--			trigger-sources = <&ehci_port2>;
--			linux,default-trigger = "usbport";
--		};
--
--		led-usb3 {
--			label = "white:usb3";
--			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
--			trigger-sources = <&ehci_port1>, <&xhci_port1>;
--			linux,default-trigger = "usbport";
--		};
--
--		led-wps {
--			label = "white:wps";
--			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
--		};
--	};
--
--	gpio-keys {
--		compatible = "gpio-keys";
--
--		button-wps {
--			label = "WPS";
--			linux,code = <KEY_WPS_BUTTON>;
--			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
--		};
--
--		button-reset {
--			label = "Reset";
--			linux,code = <KEY_RESTART>;
--			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
--		};
--
--		button-wifi {
--			label = "Wi-Fi";
--			linux,code = <KEY_RFKILL>;
--			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
--		};
--
--		button-led {
--			label = "Backlight";
--			linux,code = <KEY_BRIGHTNESS_ZERO>;
--			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
--		};
--	};
--
- 	switch {
- 		compatible = "realtek,rtl8365mb";
- 		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-@@ -175,31 +94,9 @@
- };
- 
- &srab {
--	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
--	status = "okay";
- 	dsa,member = <0 0>;
- 
- 	ports {
--		port@0 {
--			label = "lan4";
--		};
--
--		port@1 {
--			label = "lan3";
--		};
--
--		port@2 {
--			label = "lan2";
--		};
--
--		port@3 {
--			label = "lan1";
--		};
--
--		port@4 {
--			label = "wan";
--		};
--
- 		sw0_p5: port@5 {
- 			/delete-property/ethernet;
- 
-@@ -212,19 +109,6 @@
- 				pause;
- 			};
- 		};
--
--		port@7 {
--			label = "cpu";
--
--			fixed-link {
--				speed = <1000>;
--				full-duplex;
--			};
--		};
--
--		port@8 {
--			label = "cpu";
--		};
- 	};
- };
- 
-@@ -236,36 +120,3 @@
- 	nvmem-cells = <&et1macaddr>;
- 	nvmem-cell-names = "mac-address";
- };
--
--&usb2 {
--	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
--};
--
--&usb3_phy {
--	status = "okay";
--};
--
--&nandcs {
--	partitions {
--		compatible = "fixed-partitions";
--		#address-cells = <1>;
--		#size-cells = <1>;
--
--		partition@0 {
--			label = "boot";
--			reg = <0x00000000 0x00080000>;
--			read-only;
--		};
--
--		partition@80000 {
--			label = "nvram";
--			reg = <0x00080000 0x00180000>;
--		};
--
--		partition@200000 {
--			label = "firmware";
--			reg = <0x00200000 0x07e00000>;
--			compatible = "brcm,trx";
--		};
--	};
--};

target/linux/bcm53xx/patches-6.1/033-v6.7-0001-ARM-dts-BCM5301X-Set-MACs-for-D-Link-DIR-885L.patch

@@ -1,56 +0,0 @@
-From 5cbee5828219c4f7b33e96b5d8ce5e467b2857c8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 1 Sep 2023 12:55:49 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set MACs for D-Link DIR-885L
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Specify NVRAM access and use its "et2macaddr" NVMEM cell.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../dts/broadcom/bcm47094-dlink-dir-885l.dts     | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -25,6 +25,15 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1e3f0000 {
-+		compatible = "brcm,nvram";
-+		reg = <0x1e3f0000 0x10000>;
-+
-+		et2macaddr: et2macaddr {
-+			#nvmem-cell-cells = <1>;
-+		};
-+	};
-+
- 	nand_controller: nand-controller@18028000 {
- 		nand@0 {
- 			partitions {
-@@ -112,6 +121,11 @@
- 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et2macaddr 0>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &spi_nor {
- 	status = "okay";
- };
-@@ -142,6 +156,8 @@
- 
- 		port@4 {
- 			label = "wan";
-+			nvmem-cells = <&et2macaddr 3>;
-+			nvmem-cell-names = "mac-address";
- 		};
- 
- 		port@8 {

target/linux/bcm53xx/patches-6.1/033-v6.7-0002-ARM-dts-BCM5301X-Set-MAC-address-for-Asus-RT-AC87U.patch

@@ -1,44 +0,0 @@
-From a9e79863b62aaaefcdf469fc331bf482ae00db0d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 1 Sep 2023 14:43:11 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Specify NVRAM access and use its "et1macaddr" NVMEM cell.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm4709-asus-rt-ac87u.dts | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -25,6 +25,12 @@
- 		      <0x88000000 0x08000000>;
- 	};
- 
-+	nvram@1c080000 {
-+		et1macaddr: et1macaddr {
-+			#nvmem-cell-cells = <1>;
-+		};
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -62,6 +68,11 @@
- 	};
- };
- 
-+&gmac0 {
-+	nvmem-cells = <&et1macaddr 0>;
-+	nvmem-cell-names = "mac-address";
-+};
-+
- &usb3_phy {
- 	status = "okay";
- };

target/linux/bcm53xx/patches-6.1/033-v6.7-0003-ARM-dts-BCM5301X-Relicense-Felix-s-code-to-the-GPL-2.patch

@@ -1,57 +0,0 @@
-From 81ea360a16978a4df61df9db56b171909bd659c0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sat, 16 Sep 2023 10:30:57 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Felix to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-This code was added in the commit 1ff80363524c ("ARM: BCM5301X: Add
-profiling support").
-
-Cc: Felix Fietkau <[email protected]>
-Signed-off-by: Rafał Miłecki <[email protected]>
-Acked-by: Felix Fietkau <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi   | 7 +++++++
- arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 7 -------
- 2 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -14,6 +14,13 @@
- 	#address-cells = <1>;
- 	#size-cells = <1>;
- 
-+	pmu {
-+		compatible = "arm,cortex-a9-pmu";
-+		interrupts =
-+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-+	};
-+
- 	chipcommon-a-bus@18000000 {
- 		compatible = "simple-bus";
- 		ranges = <0x00000000 0x18000000 0x00001000>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -26,13 +26,6 @@
- 		};
- 	};
- 
--	pmu {
--		compatible = "arm,cortex-a9-pmu";
--		interrupts =
--			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
--			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
--	};
--
- 	clocks {
- 		#address-cells = <1>;
- 		#size-cells = <1>;

target/linux/bcm53xx/patches-6.1/033-v6.7-0004-ARM-dts-BCM5301X-Relicense-Vivek-s-code-to-the-GPL-2.patch

@@ -1,104 +0,0 @@
-From b8d4f7c1be04d66c37c119c501c87bccc4197694 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sat, 16 Sep 2023 10:58:55 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Move code added by Vivek to the bcm-ns.dtsi which uses dual licensing.
-That syncs more Northstar code to be based on the same licensing schema.
-
-This code was added in the commit 37f6130ec39f ("ARM: dts: BCM5301X:
-Make USB 3.0 PHY use MDIO PHY driver").
-
-Cc: Vivek Unune <[email protected]>
-Signed-off-by: Rafał Miłecki <[email protected]>
-Acked-by: Vivek Unune <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm-ns.dtsi   | 27 ++++++++++++++++++++++++
- arch/arm/boot/dts/broadcom/bcm5301x.dtsi | 27 ------------------------
- 2 files changed, 27 insertions(+), 27 deletions(-)
-
---- a/arch/arm/boot/dts/bcm-ns.dtsi
-+++ b/arch/arm/boot/dts/bcm-ns.dtsi
-@@ -327,6 +327,29 @@
- 		#address-cells = <1>;
- 	};
- 
-+	mdio-mux@18003000 {
-+		compatible = "mdio-mux-mmioreg", "mdio-mux";
-+		mdio-parent-bus = <&mdio>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x18003000 0x4>;
-+		mux-mask = <0x200>;
-+
-+		mdio@0 {
-+			reg = <0x0>;
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+
-+			usb3_phy: usb3-phy@10 {
-+				compatible = "brcm,ns-ax-usb3-phy";
-+				reg = <0x10>;
-+				usb3-dmp-syscon = <&usb3_dmp>;
-+				#phy-cells = <0>;
-+				status = "disabled";
-+			};
-+		};
-+	};
-+
- 	rng: rng@18004000 {
- 		compatible = "brcm,bcm5301x-rng";
- 		reg = <0x18004000 0x14>;
-@@ -467,6 +490,10 @@
- 		brcm,nand-has-wp;
- 	};
- 
-+	usb3_dmp: syscon@18105000 {
-+		reg = <0x18105000 0x1000>;
-+	};
-+
- 	thermal-zones {
- 		cpu_thermal: cpu-thermal {
- 			polling-delay-passive = <0>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -62,33 +62,6 @@
- 		};
- 	};
- 
--	mdio-mux@18003000 {
--		compatible = "mdio-mux-mmioreg", "mdio-mux";
--		mdio-parent-bus = <&mdio>;
--		#address-cells = <1>;
--		#size-cells = <0>;
--		reg = <0x18003000 0x4>;
--		mux-mask = <0x200>;
--
--		mdio@0 {
--			reg = <0x0>;
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			usb3_phy: usb3-phy@10 {
--				compatible = "brcm,ns-ax-usb3-phy";
--				reg = <0x10>;
--				usb3-dmp-syscon = <&usb3_dmp>;
--				#phy-cells = <0>;
--				status = "disabled";
--			};
--		};
--	};
--
--	usb3_dmp: syscon@18105000 {
--		reg = <0x18105000 0x1000>;
--	};
--
- 	i2c0: i2c@18009000 {
- 		compatible = "brcm,iproc-i2c";
- 		reg = <0x18009000 0x50>;

target/linux/bcm53xx/patches-6.1/033-v6.7-0005-ARM-dts-BCM5301X-Explicitly-disable-unused-switch-CP.patch

@@ -1,377 +0,0 @@
-From 473baeab929444295b0530f8766e4becb6a08973 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 13 Oct 2023 12:33:13 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Explicitly disable unused switch CPU
- ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When redescribing ports I assumed that missing "label" (like "cpu")
-means switch port isn't used. That was incorrect and I realized my
-change made Linux always use the first (5) CPU port (there are 3 of
-them).
-
-While above should technically be possible it often isn't correct:
-1. Non-default switch ports are often connected to Ethernet interfaces
-   not fully covered by vendor setup (they may miss MACs)
-2. On some devices non-default ports require specifying fixed link
-
-This fixes network connectivity for some devices. It was reported &
-tested for Netgear R8000. It also affects Linksys EA9200 with its
-downstream DTS.
-
-Fixes: ba4aebce23b2 ("ARM: dts: BCM5301X: Describe switch ports in the main DTS")
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../dts/broadcom/bcm4708-buffalo-wzr-1166dhp-common.dtsi  | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-luxul-xap-1510.dts     | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-luxul-xwc-1000.dts     | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-netgear-r6250.dts      | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4708-smartrg-sr400ac.dts    | 8 ++++++++
- .../boot/dts/broadcom/bcm47081-buffalo-wzr-600dhp2.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47081-luxul-xap-1410.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47081-luxul-xwr-1200.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts      | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-abr-4500.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xbr-4500.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwc-2000.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3100.dts    | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm53015-meraki-mr26.dts       | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm53016-meraki-mr32.dts       | 8 ++++++++
- arch/arm/boot/dts/broadcom/bcm953012er.dts                | 8 ++++++++
- 20 files changed, 160 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
-@@ -181,5 +181,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -85,5 +85,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -88,5 +88,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -122,5 +122,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -145,6 +145,14 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
- 
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -145,5 +145,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -81,5 +81,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -148,5 +148,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -227,6 +227,14 @@
- 			label = "wan";
- 		};
- 
-+		port@5 {
-+			status = "disabled";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
- 		port@8 {
- 			label = "cpu";
- 		};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -160,6 +160,14 @@
- 			nvmem-cell-names = "mac-address";
- 		};
- 
-+		port@5 {
-+			status = "disabled";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
- 		port@8 {
- 			label = "cpu";
- 		};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
-@@ -192,6 +192,14 @@
- 			label = "wan";
- 		};
- 
-+		port@5 {
-+			status = "disabled";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
- 		port@8 {
- 			label = "cpu";
- 			phy-mode = "rgmii";
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -107,5 +107,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -120,5 +120,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -107,5 +107,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -75,5 +75,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -147,5 +147,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -158,5 +158,13 @@
- 		port@5 {
- 			label = "cpu";
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
-@@ -124,6 +124,14 @@
- 				full-duplex;
- 			};
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
- 
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -185,6 +185,14 @@
- 				full-duplex;
- 			};
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
- 
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -84,6 +84,14 @@
- 			label = "cpu";
- 			ethernet = <&gmac0>;
- 		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
- 	};
- };
- 

target/linux/bcm53xx/patches-6.1/033-v6.7-0006-ARM-dts-BCM5301X-Set-fixed-link-for-extra-Netgear-R8.patch

@@ -1,47 +0,0 @@
-From d313b0e9070a7100ca55e64fe3b081d176d8806d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 13 Oct 2023 12:33:14 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000
- CPU ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Ports 5 and 7 are disabled by default because the standard use case is
-for port 8 to manage all CPU directed traffic. For experimentation
-purposes however it is desirable to provide adequate properties such
-that people can experiment with using different ports without having to
-figure out their configuration. Some of the use cases include but are
-not limited to doubling or tripling the bandwidth by leveraging the
-additional ports/Ethernet MAC combinations.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- arch/arm/boot/dts/broadcom/bcm4709-netgear-r8000.dts | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -229,10 +229,20 @@
- 
- 		port@5 {
- 			status = "disabled";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
- 		};
- 
- 		port@7 {
- 			status = "disabled";
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
- 		};
- 
- 		port@8 {

target/linux/bcm53xx/patches-6.1/033-v6.7-0007-ARM-dts-BCM5301X-Set-switch-ports-for-Linksys-EA9200.patch

@@ -1,63 +0,0 @@
-From 253358f373492608348136e569366d73cb969f6a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Tue, 24 Oct 2023 09:26:05 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch was developed as OpenWrt downstream change and was recently
-confirmed to work as expected.
-
-Tested-by: Rani Hod <[email protected]>
-Signed-off-by: Rafał Miłecki <[email protected]>
-Link: https://lore.kernel.org/r/[email protected]
-Signed-off-by: Florian Fainelli <[email protected]>
----
- .../dts/broadcom/bcm4709-linksys-ea9200.dts   | 38 +++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -47,3 +47,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			status = "disabled";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			label = "cpu";
-+		};
-+	};
-+};

target/linux/bcm53xx/patches-6.1/080-v6.2-bcma-support-SPROM-rev-11.patch

@@ -1,28 +0,0 @@
-From b9457a04eb89645049fdf427c13e6a18d5501895 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <[email protected]>
-Date: Tue, 11 Oct 2022 14:24:40 +0200
-Subject: [PATCH] bcma: support SPROM rev 11
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Rev 11 works fine for me to set the MAC address of gmac0 and
-gmac1 in the D-Link DWL-8610AP.
-
-Cc: Rafał Miłecki <[email protected]>
-Signed-off-by: Linus Walleij <[email protected]>
----
- drivers/bcma/sprom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/bcma/sprom.c
-+++ b/drivers/bcma/sprom.c
-@@ -170,7 +170,7 @@ static int bcma_sprom_valid(struct bcma_
- 		return err;
- 
- 	revision = sprom[words - 1] & SSB_SPROM_REVISION_REV;
--	if (revision != 8 && revision != 9 && revision != 10) {
-+	if (revision < 8 || revision > 11) {
- 		pr_err("Unsupported SPROM revision: %d\n", revision);
- 		return -ENOENT;
- 	}

target/linux/bcm53xx/patches-6.1/140-mtd-parsers-trx-parse-firmware-MTD-partitions-only.patch

@@ -1,43 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Tue, 13 Apr 2021 18:25:20 +0200
-Subject: [PATCH] mtd: parsers: trx: parse "firmware" MTD partitions only
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Parsing every partition with "compatible" set to "brcm,trx" results in
-parsing both: firmware partition and failsafe partition on devices that
-implement failsafe booting. This affects e.g. Linksys EA9500 which has:
-
-partition@200000 {
-	reg = <0x0200000 0x01d00000>;
-	compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-partition@1f00000 {
-	reg = <0x01f00000 0x01d00000>;
-	compatible = "linksys,ns-firmware", "brcm,trx";
-};
-
-Check for MTD partition name "firmware" before parsing. Recently added
-ofpart_linksys_ns.c creates "firmware" and "failsafe" depending on
-bootloader setup.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
- drivers/mtd/parsers/parser_trx.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -92,6 +92,10 @@ static int parser_trx_parse(struct mtd_i
- 	if (err != 0 && err != -EINVAL)
- 		pr_err("failed to parse \"brcm,trx-magic\" DT attribute, using default: %d\n", err);
- 
-+	/* Don't parse any failsafe / backup partitions */
-+	if (strcmp(mtd->name, "firmware"))
-+		return -EINVAL;
-+
- 	parts = kcalloc(TRX_PARSER_MAX_PARTS, sizeof(struct mtd_partition),
- 			GFP_KERNEL);
- 	if (!parts)

target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch

@@ -1,118 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c |  6 +++++
- drivers/usb/host/xhci.c      | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h      |  1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -77,6 +77,8 @@ static int xhci_priv_resume_quirk(struct
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
- 	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
-+	struct platform_device*pdev = to_platform_device(dev);
-+	struct device_node *node = pdev->dev.of_node;
- 
- 	/*
- 	 * As of now platform drivers don't provide MSI support so we ensure
-@@ -84,6 +86,9 @@ static void xhci_plat_quirks(struct devi
- 	 * dev struct in order to setup MSI
- 	 */
- 	xhci->quirks |= XHCI_PLAT | priv->quirks;
-+
-+	if (node && of_machine_is_compatible("brcm,bcm4708"))
-+		xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
- 
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -161,6 +161,49 @@ int xhci_start(struct xhci_hcd *xhci)
- 	return ret;
- }
- 
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+	u32 temp;
-+
-+	/* Alloc a virt device for that slot */
-+	if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+		return -ENOMEM;
-+	}
-+
-+	/* Ring fake doorbell for slot_id ep 0 */
-+	xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+	usleep_range(1000, 1500);
-+
-+	/* Read the status to check if HSE is set or not */
-+	temp = readl(&xhci->op_regs->status);
-+
-+	/* Clear HSE if set */
-+	if (temp & STS_FATAL) {
-+		xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+		temp &= ~0x1fff;
-+		temp |= STS_FATAL;
-+		writel(temp, &xhci->op_regs->status);
-+		usleep_range(1000, 1500);
-+		readl(&xhci->op_regs->status);
-+	}
-+
-+	/* Free virt device */
-+	xhci_free_virt_device(xhci, slot_id);
-+
-+	/* We're done if controller is already running */
-+	if (readl(&xhci->op_regs->command) & CMD_RUN)
-+		return 0;
-+
-+	return xhci_start(xhci);
-+}
-+
- /*
-  * Reset a halted HC.
-  *
-@@ -641,6 +684,15 @@ static int xhci_run_finished(struct xhci
- 		return -ENODEV;
- 	}
- 
-+	if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+		int err = xhci_fake_doorbell(xhci, 1);
-+		if (err) {
-+			xhci_halt(xhci);
-+			spin_unlock_irqrestore(&xhci->lock, flags);
-+			return err;
-+		}
-+	}
-+
- 	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
- 
- 	if (xhci->quirks & XHCI_NEC_HOST)
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1908,6 +1908,7 @@ struct xhci_hcd {
- #define XHCI_RESET_TO_DEFAULT	BIT_ULL(44)
- #define XHCI_ZHAOXIN_TRB_FETCH	BIT_ULL(45)
- #define XHCI_ZHAOXIN_HOST	BIT_ULL(46)
-+#define XHCI_FAKE_DOORBELL     BIT_ULL(47)
- 
- 	unsigned int		num_active_eps;
- 	unsigned int		limit_active_eps;

target/linux/bcm53xx/patches-6.1/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch

@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M    (1 << 0)        /* MMU enable */
-#define CR_C    (1 << 2)        /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS		+= ll_char_wr.o font.o
- endif
- 
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS		+= head-bcm_5301x-mpcore.o
-+OBJS		+= cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS		+= head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks.  This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+		.section        ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+	@ Preserve r8/r7 i.e. kernel entry values
-+	mov	r12, r8
-+
-+	@ Clear MMU enable and Dcache enable bits
-+	mrc	p15, 0, r0, c1, c0, 0		@ Read SCTLR
-+	bic	r0, #CR_C|CR_M
-+	mcr	p15, 0, r0, c1, c0, 0		@ Write SCTLR
-+	nop
-+
-+	@ Call the cache invalidation routine
-+	bl	v7_flush_dcache_all
-+	nop
-+	mov	r0,#0
-+	ldr	r3, =0x19022000			@ L2 cache controller, control reg
-+	str	r0, [r3, #0x100]		@ Disable L2 cache
-+	nop
-+
-+	@ Restore
-+	mov	r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
- 
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
- 
- 	__INIT
- 
-@@ -63,7 +64,7 @@ loop2:
-  ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
-  THUMB(	lsl	r6, r9, r2		)
-  THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
--	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
-+	mcr     p15, 0, r11, c7, c6, 2		@ clean & invalidate by set/way
- 	subs	r9, r9, #1			@ decrement the index
- 	bge	loop2
- 	subs	r4, r4, #1			@ decrement the way

target/linux/bcm53xx/patches-6.1/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch

@@ -1,675 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Subject: [PATCH] ARM: dts: BCM5301X: Specify switch ports for remaining
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -92,3 +92,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -83,3 +83,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -149,3 +149,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -46,3 +46,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -43,3 +43,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -86,3 +86,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -77,3 +77,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -77,6 +77,40 @@
- 	status = "okay";
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan3";
-+		};
-+
-+		port@5 {
-+			status = "disabled";
-+		};
-+
-+		port@7 {
-+			label = "cpu";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
-+
- &nandcs {
- 	partitions {
- 		compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -130,3 +130,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -104,3 +104,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -94,3 +94,41 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			status = "disabled";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			label = "cpu";
-+		};
-+	};
-+};
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -38,6 +38,40 @@
- 	status = "okay";
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
-+
- &nandcs {
- 	partitions {
- 		compatible = "fixed-partitions";
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -91,6 +91,44 @@
- 	};
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
-+
- &spi_nor {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -100,6 +100,44 @@
- 	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
- };
- 
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "wan";
-+		};
-+
-+		port@1 {
-+			label = "lan1";
-+		};
-+
-+		port@2 {
-+			label = "lan2";
-+		};
-+
-+		port@3 {
-+			label = "lan3";
-+		};
-+
-+		port@4 {
-+			label = "lan4";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
-+
- &spi_nor {
- 	status = "okay";
- 
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -107,3 +107,42 @@
- &usb3_phy {
- 	status = "okay";
- };
-+
-+&srab {
-+	status = "okay";
-+
-+	ports {
-+		port@0 {
-+			label = "lan1";
-+		};
-+
-+		port@1 {
-+			label = "lan2";
-+		};
-+
-+		port@2 {
-+			label = "lan3";
-+		};
-+
-+		port@3 {
-+			label = "lan4";
-+		};
-+
-+		port@4 {
-+			label = "wan";
-+		};
-+
-+		port@5 {
-+			label = "cpu";
-+		};
-+
-+		port@7 {
-+			status = "disabled";
-+		};
-+
-+		port@8 {
-+			status = "disabled";
-+		};
-+	};
-+};
-+

target/linux/bcm53xx/patches-6.1/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch

@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -125,6 +125,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- 	bcm4709-buffalo-wxr-1900dhp.dtb \
- 	bcm4709-linksys-ea9200.dtb \
- 	bcm4709-netgear-r7000.dtb \
-+	bcm4709-netgear-r7900.dtb \
- 	bcm4709-netgear-r8000.dtb \
- 	bcm4709-tplink-archer-c9-v1.dtb \
- 	bcm47094-asus-rt-ac3100.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <[email protected]>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+	compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+	model = "Netgear R7900";
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200";
-+	};
-+
-+	memory {
-+		reg = <0x00000000 0x08000000
-+		       0x88000000 0x08000000>;
-+	};
-+
-+	axi@18000000 {
-+		usb3@23000 {
-+			reg = <0x00023000 0x1000>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&uart0 {
-+	status = "okay";
-+};

target/linux/bcm53xx/patches-6.1/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch

@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c     | 4 ++++
- drivers/mtd/ubi/ubi.h    | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -82,6 +82,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD		BIT(1)
- #define AV_FIND_OR_ADD	(AV_FIND | AV_ADD)
- 
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
-  * find_or_add_av - internal function to find a volume, add a volume or do
-  *		    both (find and add if missing).
-@@ -1580,6 +1583,8 @@ int ubi_attach(struct ubi_device *ubi, i
- 	if (!ai)
- 		return -ENOMEM;
- 
-+	erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- 	/* On small flash devices we disable fastmap in any case. */
- 	if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -717,6 +717,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- 	}
- 
- 	magic = be32_to_cpu(ec_hdr->magic);
-+	if (magic == 0xdeadc0de)
-+		erase_all_next = true;
-+	if (erase_all_next)
-+		return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- 	if (magic != UBI_EC_HDR_MAGIC) {
- 		if (mtd_is_eccerr(read_err))
- 			return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -822,6 +822,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
- 
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- 				   int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);

target/linux/bcm53xx/patches-6.1/600-net-disable-GRO-by-default.patch

@@ -1,36 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 20 Jun 2022 10:01:18 +0200
-Subject: [PATCH] net: disable GRO by default
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In many cases GRO improves network performance however it comes at a
-cost of chacksums calculations. In case of slow CPU and missing hardware
-csum calculation support GRO can actually decrease network speed.
-
-On BCM4708 *disabling* GRO results in following NAT masquarade speed
-changes:
-1. 364 Mb/s → 396 Mb/s (packet steering disabled)
-2. 341 Mb/s → 566 Mb/s (packet steering enabled)
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
- include/linux/netdev_features.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdev_features.h
-+++ b/include/linux/netdev_features.h
-@@ -242,10 +242,10 @@ static inline int find_next_netdev_featu
- #define NETIF_F_UPPER_DISABLES	NETIF_F_LRO
- 
- /* changeable features with no special hardware requirements */
--#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST)
-+#define NETIF_F_SOFT_FEATURES	(NETIF_F_GSO)
- 
- /* Changeable features with no special hardware requirements that defaults to off. */
--#define NETIF_F_SOFT_FEATURES_OFF	(NETIF_F_GRO_UDP_FWD)
-+#define NETIF_F_SOFT_FEATURES_OFF	(NETIF_F_GRO_UDP_FWD | NETIF_F_GRO | NETIF_F_GRO_FRAGLIST)
- 
- #define NETIF_F_VLAN_FEATURES	(NETIF_F_HW_VLAN_CTAG_FILTER | \
- 				 NETIF_F_HW_VLAN_CTAG_RX | \

target/linux/bcm53xx/patches-6.1/700-bgmac-reduce-max-frame-size-to-support-just-MTU-1500.patch

@@ -1,33 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Fri, 10 Jun 2022 13:10:47 +0200
-Subject: [PATCH] bgmac: reduce max frame size to support just MTU 1500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-bgmac allocates new replacement buffer before handling each received
-frame. Allocating & DMA-preparing 9724 B each time consumes a lot of CPU
-time. Ideally bgmac should just respect currently set MTU but it isn't
-the case right now. For now just revert back to the old limited frame
-size.
-
-This change bumps NAT masquarade speed by ~95%.
-
-Ref: 8c7da63978f1 ("bgmac: configure MTU and add support for frames beyond 8192 byte size")
-Signed-off-by: Rafał Miłecki <[email protected]>
----
- drivers/net/ethernet/broadcom/bgmac.h | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -328,8 +328,7 @@
- #define BGMAC_RX_FRAME_OFFSET			30		/* There are 2 unused bytes between header and real data */
- #define BGMAC_RX_BUF_OFFSET			(NET_SKB_PAD + NET_IP_ALIGN - \
- 						 BGMAC_RX_FRAME_OFFSET)
--/* Jumbo frame size with FCS */
--#define BGMAC_RX_MAX_FRAME_SIZE			9724
-+#define BGMAC_RX_MAX_FRAME_SIZE			1536
- #define BGMAC_RX_BUF_SIZE			(BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
- #define BGMAC_RX_ALLOC_SIZE			(SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
- 						 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))

target/linux/bcm53xx/patches-6.1/905-BCM53573-minor-hacks.patch

@@ -1,80 +0,0 @@
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <[email protected]>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -54,6 +54,7 @@
- 			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+		clocks = <&ilp>;
- 	};
- 
- 	clocks {
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -330,14 +330,6 @@ static int bcma_register_devices(struct
- 	}
- #endif
- 
--#ifdef CONFIG_BCMA_SFLASH
--	if (bus->drv_cc.sflash.present) {
--		err = platform_device_register(&bcma_sflash_dev);
--		if (err)
--			bcma_err(bus, "Error registering serial flash\n");
--	}
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- 	if (bus->drv_cc.nflash.present) {
- 		err = platform_device_register(&bcma_nflash_dev);
-@@ -415,6 +407,14 @@ int bcma_bus_register(struct bcma_bus *b
- 			bcma_register_core(bus, core);
- 	}
- 
-+#ifdef CONFIG_BCMA_SFLASH
-+	if (bus->drv_cc.sflash.present) {
-+		err = platform_device_register(&bcma_sflash_dev);
-+		if (err)
-+			bcma_err(bus, "Error registering serial flash\n");
-+	}
-+#endif
-+
- 	/* Try to get SPROM */
- 	err = bcma_sprom_get(bus);
- 	if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -14,6 +14,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/clocksource_ids.h>
-@@ -1029,6 +1030,16 @@ static void __init arch_timer_of_configu
- 	if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- 		arch_timer_rate = rate;
- 
-+	/* Get clk rate through clk driver if present */
-+	if (!arch_timer_rate) {
-+		struct clk *clk = of_clk_get(np, 0);
-+
-+		if (!IS_ERR(clk)) {
-+			if (!clk_prepare_enable(clk))
-+				arch_timer_rate = clk_get_rate(clk);
-+		}
-+	}
-+
- 	/* Check the timer frequency. */
- 	if (validate_timer_rate())
- 		pr_warn("frequency not available\n");