Add the PS3 specific utility bl-option, a helper sctipt to get and set bootloader options in flash memory.

Signed-off-by: Geoff Levand <[email protected]>

SVN-Revision: 11512

package/base-files/files/etc/init.d/boot

@@ -17,9 +17,13 @@ system_config() {
 	[ -z "$timezone" ] && timezone=UTC
 	echo "$timezone" > /tmp/TZ
 
-	config_get log_ip "$cfg" log_ip 
+	config_get log_ip "$cfg" log_ip
 	config_get log_size "$cfg" log_size
-	syslogd -C${log_size:-16} ${log_ip:+-L -R $log_ip}
+	config_get log_file "$cfg" log_file
+	# use a shared mem buffer for local default
+	[ -z $log_file -a -z "$log_size" ] && log_size=16
+	syslogd ${log_size:+-C $log_size} ${log_file:+-O $log_file} \
+		${log_ip:+-L -R $log_ip}
 	klogd
 }
 
@@ -33,15 +37,16 @@ start() {
 	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
 	[ -f /proc/net/vlan/config ] && vconfig set_name_type DEV_PLUS_VID_NO_PAD
 
-	apply_uci_config
-	config_load system
-	config_foreach system_config system
-	
 	mkdir -p /var/run
 	mkdir -p /var/log
 	mkdir -p /var/lock
 	mkdir -p /var/state
 	mkdir -p /tmp/.uci
+
+	apply_uci_config
+	config_load system
+	config_foreach system_config system
+
 	chown 0700 /tmp/.uci
 	touch /var/log/wtmp
 	touch /var/log/lastlog

target/linux/ps3/base-files/bin/login

@@ -1,13 +1,11 @@
 #!/bin/sh
 # Copyright (C) 2008 OpenWrt.org
 
-ps3_db_bin=/usr/sbin/ps3-flash-util
-ps3_db_owner_petitboot=3
-ps3_db_key_telnet=3
+bl_option=/sbin/bl-option
 
-if [ ! -f $ps3_db_bin ] ||
-   [ ! `$ps3_db_bin -P $ps3_db_owner_petitboot $ps3_db_key_telnet` ] ||
-   [ `$ps3_db_bin -P $ps3_db_owner_petitboot $ps3_db_key_telnet` = 0 ]; then
+if [ ! -f $bl_option ] ||
+   [ ! `$bl_option --get-telnet-enabled` ] ||
+   [ `$bl_option --get-telnet-enabled` = "0" ]; then
     echo \
 "
  === IMPORTANT ==========================
@@ -19,12 +17,12 @@ if [ ! -f $ps3_db_bin ] ||
   You can enable telnet login with the
   following command in the host console:
 
-  # $ps3_db_bin -H $ps3_db_owner_petitboot $ps3_db_key_telnet 1
+  # $bl_option -T 1
 
   You can disable telnet login with the
   following command in the host console:
 
-  # $ps3_db_bin -H $ps3_db_owner_petitboot $ps3_db_key_telnet 0
+  # $bl_option -T 0
  ----------------------------------------
 "
     exit 0