arm-trusted-firmware-mediatek: add build for MT7981 DDR3

Add new build option BOARD_QFN/BOARD_BGA.
This option is only useful for MT7981 device.
MT7981A/B: BOARD_BGA, MT7981C: BOARD_QFN.

Signed-off-by: Chukun Pan <[email protected]>

package/boot/arm-trusted-firmware-mediatek/Makefile

@@ -30,6 +30,7 @@ define Trusted-Firmware-A/Default
   DDR3_FLYBY:=
   DDR_TYPE:=
   NAND_TYPE:=
+  BOARD_QFN:=
 endef
 
 define Trusted-Firmware-A/mt7622-nor-1ddr
@@ -92,6 +93,46 @@ define Trusted-Firmware-A/mt7622-sdmmc-2ddr
   DDR3_FLYBY:=1
 endef
 
+define Trusted-Firmware-A/mt7981-nor-ddr3
+  NAME:=MediaTek MT7981 (SPI-NOR, DDR3)
+  BOOT_DEVICE:=nor
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7981-emmc-ddr3
+  NAME:=MediaTek MT7981 (eMMC, DDR3)
+  BOOT_DEVICE:=emmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7981-sdmmc-ddr3
+  NAME:=MediaTek MT7981 (SD card, DDR3)
+  BOOT_DEVICE:=sdmmc
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7986-snand-ddr3
+  NAME:=MediaTek MT7981 (SPI-NAND via SNFI, DDR3)
+  BOOT_DEVICE:=snand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
+define Trusted-Firmware-A/mt7981-spim-nand-ddr3
+  NAME:=MediaTek MT7981 (SPI-NAND via SPIM, DDR3)
+  BOOT_DEVICE:=spim-nand
+  BUILD_SUBTARGET:=filogic
+  PLAT:=mt7981
+  DDR_TYPE:=ddr3
+endef
+
 define Trusted-Firmware-A/mt7986-nor-ddr4
   NAME:=MediaTek MT7986 (SPI-NOR, DDR4)
   BOOT_DEVICE:=nor
@@ -182,6 +223,11 @@ TFA_TARGETS:= \
 	mt7622-emmc-2ddr \
 	mt7622-sdmmc-1ddr \
 	mt7622-sdmmc-2ddr \
+	mt7981-emmc-ddr3 \
+	mt7981-nor-ddr3 \
+	mt7981-sdmmc-ddr3 \
+	mt7986-snand-ddr3 \
+	mt7981-spim-nand-ddr3 \
 	mt7986-emmc-ddr3 \
 	mt7986-nor-ddr3 \
 	mt7986-sdmmc-ddr3 \
@@ -197,6 +243,7 @@ TFA_MAKE_FLAGS += \
 	BOOT_DEVICE=$(BOOT_DEVICE) \
 	USE_MKIMAGE=1 MKIMAGE=$(STAGING_DIR_HOST)/bin/mkimage \
 	$(if $(findstring ddr4,$(DDR_TYPE)),DRAM_USE_DDR4=1) \
+	$(if $(BOARD_QFN),BOARD_QFN=1,BOARD_BGA=1) \
 	$(if $(NAND_TYPE),NAND_TYPE=$(NAND_TYPE)) \
 	HAVE_DRAM_OBJ_FILE=yes \
 	$(if $(DDR3_FLYBY),DDR3_FLYBY=1) \