mediatek: add support for Acer Predator W6d and Acer Vero W6m

This commit adds support for two variants of the already supported router
Acer Predator Connect W6: The Acer Predator Connect W6d (W6 without 6 GHz
wifi) and the Acer Connect Vero W6m (W6 without 2.5G eth1 port, usb3 port,
and the 6 on-board gpio RGB LEDs, and with a KTD2026 RGB LED controller
instead of the KTD2061 LED controller of the W6/W6d).

The device tree for the W6m refers to the KTD202x driver suggested in
PR #16860.

Patching target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
removes the code repetition in (old) lines 121 to 124 on the occasion.

This is the last of four commits into which the original commit was split
to make reviews easier and more targeted.

Signed-off-by: George Oldfort <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16861
Signed-off-by: Hauke Mehrtens <[email protected]>
(cherry picked from commit 2898d1d1269a841e5bb8673801bd2a04ad120031)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <[email protected]>

package/boot/uboot-envtools/files/mediatek_filogic

@@ -50,6 +50,8 @@ zyxel,ex5601-t0-ubootmod)
 	ubootenv_add_ubi_default
 	;;
 acer,predator-w6|\
+acer,predator-w6d|\
+acer,vero-w6m|\
 glinet,gl-mt2500|\
 glinet,gl-mt6000|\
 glinet,gl-x3000|\

target/linux/mediatek/dts/mt7986a-acer-predator-w6d.dts

@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include "mt7986a-acer-w6-common.dtsi"
+
+/ {
+	model = "Acer Predator Connect W6d";
+	compatible = "acer,predator-w6d", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		led-boot = &led_status_blue;
+		led-failsafe = &led_status_blue;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_red;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_green: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_status_blue: led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <0>;
+			gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pio 34 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <1>;
+			gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pio 38 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pio 37 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <2>;
+			gpios = <&pio 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-9 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&pio 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-10 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-11 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <3>;
+			gpios = <&pio 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-12 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <4>;
+			gpios = <&pio 28 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-13 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <4>;
+			gpios = <&pio 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-14 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <4>;
+			gpios = <&pio 32 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-15 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <5>;
+			gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-16 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <5>;
+			gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-17 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			function-enumerator = <5>;
+			gpios = <&pio 43 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&eth {
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		phy-handle = <&phy6>;
+	};
+};
+
+&mdio {
+	phy6: phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <6>;
+		reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+		/* LED0: nc ; LED1: nc ; LED2: amber ; LED3: green */
+		mxl,led-config = <0x0 0x0 0x370 0x380>;
+	};
+};
+
+&swport0 {
+	label = "game";
+};

target/linux/mediatek/dts/mt7986a-acer-vero-w6m.dts

@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+#include "mt7986a-acer-w6-common.dtsi"
+
+/ {
+	model = "Acer Connect Vero W6m";
+	compatible = "acer,vero-w6m", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		led-boot = &led_status;
+		led-failsafe = &led_status;
+		led-running = &led_status;
+		led-upgrade = &led_status;
+	};
+};
+
+&i2c0 {
+	led-controller@30 {
+		compatible = "kinetic,ktd2026";
+		reg = <0x30>;
+		vin-supply = <&reg_5v>;
+		vio-supply = <&reg_3p3v>;
+
+		led_status: multi-led {
+			color = <LED_COLOR_ID_RGB>;
+			function = LED_FUNCTION_STATUS;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+		};
+	};
+};
+
+&nvmem {
+	eeprom_factory_a0000: eeprom@a0000 {
+		reg = <0xa0000 0x1000>;
+	};
+};
+
+&slot0 {
+	radio0: mt7915@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		nvmem-cells = <&eeprom_factory_a0000>;
+		nvmem-cell-names = "eeprom";
+	};
+};
+
+&swport0 {
+       label = "internet";
+};

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -18,9 +18,13 @@ mediatek_setup_interfaces()
 	acelink,ew-7886cax)
 		ucidef_set_interface_lan "eth0" "dhcp"
 		;;
-	acer,predator-w6)
+	acer,predator-w6|\
+	acer,predator-w6d)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 game" eth1
 		;;
+	acer,vero-w6m)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" internet
+		;;
 	arcadyan,mozart)
 		ucidef_set_interfaces_lan_wan "lan0 eth1" eth2
 		;;
@@ -132,7 +136,9 @@ mediatek_setup_macs()
 	local label_mac=""
 
 	case $board in
-	acer,predator-w6)
+	acer,predator-w6|\
+	acer,predator-w6d|\
+	acer,vero-w6m)
 		wan_mac=$(mmc_get_mac_ascii u-boot-env WANMAC)
 		lan_mac=$(mmc_get_mac_ascii u-boot-env LANMAC)
 		;;

target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac

@@ -17,11 +17,16 @@ case "$board" in
 		[ "$PHYNBR" = "0" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && macaddr_setbit_la $addr > /sys${DEVPATH}/macaddress
 		;;
-	acer,predator-w6)
+	acer,predator-w6|\
+	acer,vero-w6m)
 		[ "$PHYNBR" = "0" ] && mmc_get_mac_ascii u-boot-env 2gMAC > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "1" ] && mmc_get_mac_ascii u-boot-env 6gMAC > /sys${DEVPATH}/macaddress
 		[ "$PHYNBR" = "2" ] && mmc_get_mac_ascii u-boot-env 5gMAC > /sys${DEVPATH}/macaddress
 		;;
+	acer,predator-w6d)
+		[ "$PHYNBR" = "0" ] && mmc_get_mac_ascii u-boot-env 2gMAC > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && mmc_get_mac_ascii u-boot-env 5gMAC > /sys${DEVPATH}/macaddress
+		;;
 	asus,rt-ax59u)
 		CI_UBIPART="UBI_DEV"
 		addr=$(mtd_get_mac_binary_ubi "Factory" 0x4)

target/linux/mediatek/filogic/base-files/lib/preinit/10_fix_eth_mac.sh

@@ -2,7 +2,8 @@
 
 preinit_set_mac_address() {
 	case $(board_name) in
-	acer,predator-w6)
+	acer,predator-w6|\
+	acer,predator-w6d)
 		$(mmc_get_mac_ascii u-boot-env WANMAC)
 		$(mmc_get_mac_ascii u-boot-env LANMAC)
 		ip link set dev lan1 address "$lan_mac"
@@ -11,6 +12,14 @@ preinit_set_mac_address() {
 		ip link set dev game address "$lan_mac"
 		ip link set dev eth1 address "$wan_mac"
 		;;
+	acer,vero-w6m)
+		wan_mac=$(mmc_get_mac_ascii u-boot-env WANMAC)
+		lan_mac=$(mmc_get_mac_ascii u-boot-env LANMAC)
+		ip link set dev lan1 address "$lan_mac"
+		ip link set dev lan2 address "$lan_mac"
+		ip link set dev lan3 address "$lan_mac"
+		ip link set dev internet address "$wan_mac"
+		;;
 	asus,tuf-ax4200|\
 	asus,tuf-ax6000)
 		CI_UBIPART="UBI_DEV"

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -91,7 +91,13 @@ platform_do_upgrade() {
 		fit_do_upgrade "$1"
 		;;
 	acer,predator-w6|\
+	acer,predator-w6d|\
+	acer,vero-w6m|\
 	arcadyan,mozart|\
+	glinet,gl-mt2500|\
+	glinet,gl-mt6000|\
+	glinet,gl-x3000|\
+	glinet,gl-xe3000|\
 	smartrg,sdg-8612|\
 	smartrg,sdg-8614|\
 	smartrg,sdg-8622|\
@@ -115,14 +121,6 @@ platform_do_upgrade() {
 	yuncore,ax835)
 		default_do_upgrade "$1"
 		;;
-	glinet,gl-mt2500|\
-	glinet,gl-mt6000|\
-	glinet,gl-x3000|\
-	glinet,gl-xe3000)
-		CI_KERNPART="kernel"
-		CI_ROOTPART="rootfs"
-		emmc_do_upgrade "$1"
-		;;
 	mercusys,mr90x-v1|\
 	tplink,re6000xd)
 		CI_UBIPART="ubi0"
@@ -204,6 +202,8 @@ platform_copy_config() {
 		fi
 		;;
 	acer,predator-w6|\
+	acer,predator-w6d|\
+	acer,vero-w6m|\
 	arcadyan,mozart|\
 	glinet,gl-mt2500|\
 	glinet,gl-mt6000|\

target/linux/mediatek/image/filogic.mk

@@ -165,6 +165,36 @@ define Device/acer_predator-w6
 endef
 TARGET_DEVICES += acer_predator-w6
 
+define Device/acer_predator-w6d
+  DEVICE_VENDOR := Acer
+  DEVICE_MODEL := Predator Connect W6d
+  DEVICE_DTS := mt7986a-acer-predator-w6d
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+  IMAGES := sysupgrade.bin
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_predator-w6d
+
+define Device/acer_vero-w6m
+  DEVICE_VENDOR := Acer
+  DEVICE_MODEL := Connect Vero W6m
+  DEVICE_DTS := mt7986a-acer-vero-w6m
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  DEVICE_PACKAGES := kmod-leds-ktd202x kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+  IMAGES := sysupgrade.bin
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_vero-w6m
+
 define Device/adtran_smartrg
   DEVICE_VENDOR := Adtran
   DEVICE_DTS_DIR := ../dts