ramips: ethernet: ralink: move reset of the esw into the esw instead of fe

The esw reset should only done by the esw driver and not by the fe itself.

Signed-off-by: Alexander Couzens <[email protected]>

target/linux/ramips/dts/mt7628an.dtsi

@@ -429,8 +429,8 @@
 		interrupt-parent = <&cpuintc>;
 		interrupts = <5>;
 
-		resets = <&rstctrl 21 &rstctrl 23>;
-		reset-names = "fe", "esw";
+		resets = <&rstctrl 21>;
+		reset-names = "fe";
 
 		mediatek,switch = <&esw>;
 	};

target/linux/ramips/dts/rt5350.dtsi

@@ -343,8 +343,8 @@
 		compatible = "ralink,rt5350-eth";
 		reg = <0x10100000 0x10000>;
 
-		resets = <&rstctrl 21 &rstctrl 23>;
-		reset-names = "fe", "esw";
+		resets = <&rstctrl 21>;
+		reset-names = "fe";
 
 		interrupt-parent = <&cpuintc>;
 		interrupts = <5>;

target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3050.c

@@ -462,6 +462,8 @@ static void esw_hw_init(struct rt305x_esw *esw)
 	u8 port_disable = 0;
 	u8 port_map = RT305X_ESW_PMAP_LLLLLL;
 
+	esw_reset(esw);
+
 	/* vodoo from original driver */
 	esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0);
 	esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2);

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt3050.c

@@ -19,9 +19,6 @@
 #include "mtk_eth_soc.h"
 #include "mdio_rt2880.h"
 
-#define RT305X_RESET_FE         BIT(21)
-#define RT305X_RESET_ESW        BIT(23)
-
 static const u16 rt5350_reg_table[FE_REG_COUNT] = {
 	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
 	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
@@ -115,11 +112,6 @@ static void rt5350_tx_dma(struct fe_tx_dma *txd)
 	txd->txd4 = 0;
 }
 
-static void rt5350_fe_reset(struct fe_priv *priv)
-{
-	fe_reset(RT305X_RESET_FE | RT305X_RESET_ESW);
-}
-
 static struct fe_soc_data rt3050_data = {
 	.init_data = rt305x_init_data,
 	.fwd_config = rt3050_fwd_config,
@@ -133,7 +125,6 @@ static struct fe_soc_data rt3050_data = {
 static struct fe_soc_data rt5350_data = {
 	.init_data = rt5350_init_data,
 	.reg_table = rt5350_reg_table,
-	.reset_fe = rt5350_fe_reset,
 	.set_mac = rt5350_set_mac,
 	.fwd_config = rt5350_fwd_config,
 	.tx_dma = rt5350_tx_dma,