ramips: prepare ZBT-WG3526 for hardware variants

The ZBT-WG3526 is available with 16 or 32 MByte of flash. Rename the
current supported 16MByte version to indicate which flash size variant
is supported.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ramips/base-files/etc/board.d/02_network

@@ -115,7 +115,7 @@ ramips_setup_interfaces()
 	zbt-we1326|\
 	zbt-we826|\
 	zbt-wg2626|\
-	zbt-wg3526|\
+	zbt-wg3526-16M|\
 	zbt-wr8305rt)
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"

target/linux/ramips/base-files/etc/diag.sh

@@ -79,8 +79,7 @@ get_status_led() {
 	rut5xx|\
 	v11st-fe|\
 	wmr-300|\
-	zbt-wg2626|\
-	zbt-wg3526)
+	zbt-wg2626)
 		status_led="$board:green:status"
 		;;
 	ai-br100|\
@@ -275,6 +274,9 @@ get_status_led() {
 	zbt-cpe102)
 		status_led="$board:green:4g-0"
 		;;
+	zbt-wg3526-16M)
+		status_led="zbt-wg3526:green:status"
+		;;
 	esac
 }
 

target/linux/ramips/base-files/lib/ramips.sh

@@ -661,8 +661,8 @@ ramips_board_detect() {
 	*"ZBT-WG2626")
 		name="zbt-wg2626"
 		;;
-	*"ZBT-WG3526")
-		name="zbt-wg3526"
+	*"ZBT-WG3526 (16M)")
+		name="zbt-wg3526-16M"
 		;;
 	*"ZBT-WR8305RT")
 		name="zbt-wr8305rt"

target/linux/ramips/base-files/lib/upgrade/platform.sh

@@ -196,7 +196,7 @@ platform_check_image() {
 	zbt-we2026|\
 	zbt-we826|\
 	zbt-wg2626|\
-	zbt-wg3526|\
+	zbt-wg3526-16M|\
 	zbt-wr8305rt|\
 	zte-q7|\
 	youku-yk1)

target/linux/ramips/dts/ZBT-WG3526.dts → target/linux/ramips/dts/ZBT-WG3526-16M.dts

@@ -3,7 +3,7 @@
 #include "ZBT-WG3526.dtsi"
 
 / {
-	model = "ZBT-WG3526";
+	model = "ZBT-WG3526 (16M)";
 };
 
 &firmware {

target/linux/ramips/image/mt7621.mk

@@ -261,13 +261,14 @@ define Device/zbt-wg2626
 endef
 TARGET_DEVICES += zbt-wg2626
 
-define Device/zbt-wg3526
-  DTS := ZBT-WG3526
+define Device/zbt-wg3526-16M
+  DTS := ZBT-WG3526-16M
   IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  DEVICE_TITLE := ZBT WG3526
+  SUPPORTED_DEVICES += zbt-wg3526
+  DEVICE_TITLE := ZBT WG3526 (16MB flash)
   DEVICE_PACKAGES := kmod-usb3 kmod-usb-ledtrig-usbport kmod-ata-core kmod-ata-ahci kmod-sdhci-mt7620
 endef
-TARGET_DEVICES += zbt-wg3526
+TARGET_DEVICES += zbt-wg3526-16M
 
 # FIXME: is this still needed?
 define Image/Prepare