mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout

This commit adds OpenWrt U-Boot (UBI) layout support for MERCUSYS MR90X
v1.

Stock U-Boot UBI size:   50 MiB
OpenWrt U-boot UBI size: 126 MiB

Install
-------
1. Perform steps 1-14 of the OpenWrt installation guide (use OpenWrt
   initramfs-recovery.itb instead of initramfs-kernel.bin at the step 10,
   12 and 14).
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation

2. Make backups:
```
cat /dev/mtd0 > /tmp/boot.bin
cat /dev/mtd5 > /tmp/tp_data.bin
```
   Copy /tp_data dir content, /tmp/boot.bin and /tmp/tp_data.bin and to
   your PC using scp. You can also backup the remaining partititons. Copy
   backups to a safe place, they are required for the next steps and stock
   firmware recovery.

3. Reboot to OpenWrt initramfs:
```
reboot
```

4. Copy OpenWrt ubi-bl31-uboot.fip, ubi-preloader.bin,
   ubi-squashfs-sysupgrade.itb and MT7986_EEPROM.bin, default-mac (from
   /tp_data backup) to the /tmp folder of the router using scp.

5. Prepare UBI:
```
ubidetach -p /dev/mtd3; ubiformat /dev/mtd3 -y; ubiattach -p /dev/mtd3
ubimkvol /dev/ubi0 -N fip -t static -s 1MiB
ubiupdatevol /dev/ubi0_0 /tmp/ubi-bl31-uboot.fip
ubimkvol /dev/ubi0 -N ubootenv -s 0x1f000
ubimkvol /dev/ubi0 -N ubootenv2 -s 0x1f000
```

6.  Install kmod-mtd-rw and unlock partitions:
```
opkg update && opkg install kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
mtd unlock boot
mtd unlock bl2
mtd unlock factory
```

7. Prepare "factory" partition:
```
dd if=/dev/zero bs=$((0x8000)) count=1 | tr '\000' '\377' > /tmp/factory.bin
dd if=/tmp/MT7986_EEPROM.bin of=/tmp/factory.bin conv=notrunc
dd if=/tmp/default-mac >> /tmp/factory.bin
```

8. Write "factory" partition:
```
mtd erase factory
mtd write /tmp/factory.bin factory
```

9. Write preloader partition:
```
mtd erase bl2
mtd write /tmp/ubi-preloader.bin bl2
```

10. Write OpenWrt sysupgrade image:
```
sysupgrade -n /tmp/ubi-squashfs-sysupgrade.itb
```

Recovery
--------
1. Place OpenWrt initramfs-recovery.itb image (with original name) on the
   tftp server (IP: 192.168.1.254).
2. Press "reset" button and power on the router. After ~10 sec release the
   button.
3. Use OpenWrt initramfs system for recovery.

BL2 and FIP recovery
--------------------
Use mtk_uartboot and UART connetion if BL2 or FIP in UBI is destroyed:
Link: https://github.com/981213/mtk_uartboot
Link: https://openwrt.org/toh/mercusys/mr90x_v1#serial

Return to stock:
----------------
1. Copy "boot" partition backup (boot.bin) to the /tmp dir of the router
   using scp.

2. Install kmod-mtd-rw:
```
opkg update && opkg install kmod-mtd-rw
```

3. Restore stock U-Boot:
```
   insmod mtd-rw i_want_a_brick=1
   mtd unlock boot
   mtd erase boot
   mtd write /tmp/boot.bin boot
```

4. Erase UBI and reboot:
```
mtd erase ubi
reboot
```

5. Open U-Boot web recovery, upload stock firmware image and start
   upgrade.
Link: http://192.168.1.1

6. Complete steps 1-9 of the OpenWrt installation guide to get root
   rights.
Link: https://openwrt.org/toh/mercusys/mr90x_v1#installation

7. Upload "tp_data" partition backup (tp_data.bin) to the /tmp folder of
   the router using scp.

8. Restore stock calibrations:
```
mtd write /tmp/tp_data.bin tp_data
reboot
```

9. Perform "factory restore" via stock firmware web interface.

Signed-off-by: Mikhail Zhilkin <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16744
(cherry picked from commit ee8df790cae843f11f78511dd9ffac7e80a4d707)
Signed-off-by: Mikhail Zhilkin <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/17129
Signed-off-by: Hauke Mehrtens <[email protected]>

package/boot/uboot-envtools/files/mediatek_filogic

@@ -36,6 +36,7 @@ case "$board" in
 abt,asr3000|\
 h3c,magic-nx30-pro|\
 jcg,q30-pro|\
+mercusys,mr90x-v1-ubi|\
 netcore,n60|\
 nokia,ea0326gmp|\
 qihoo,360t7|\

target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-common.dtsi

@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GL-2.0 OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7986b.dtsi"
+
+/ {
+	aliases: aliases {
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_green;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_green;
+
+		serial0 = &uart0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x20000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <2>;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <1>;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			function-enumerator = <0>;
+			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+
+		led_status_green: led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-handle = <&phy6>;
+		phy-mode = "2500base-x";
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <1500000>;
+	reset-post-delay-us = <1000000>;
+
+	/* WAN/LAN 2.5Gbps phy
+	   MaxLinear GPY211C0VC (SLNW8) */
+	phy6: phy@6 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <6>;
+	};
+
+	switch: switch@1f {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* WAN/LAN 1Gbps port */
+		port@0 {
+			reg = <0>;
+			label = "lan0";
+		};
+
+		/* LAN1 port */
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		/* LAN2 port */
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@6 {
+			reg = <6>;
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&pio {
+	spi_flash_pins: spi-flash-pins-33-to-38 {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+		conf-pu {
+			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+		conf-pd {
+			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
+			drive-strength = <8>;
+			mediatek,pull-down-adv = <0>; /* bias-disable */
+		};
+	};
+
+	wf_2g_5g_pins: wf_2g_5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+	status = "okay";
+
+	spi_nand_flash: flash@0 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		spi-max-frequency = <20000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+
+		partitions: partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wf_2g_5g_pins>;
+
+	ieee80211-freq-limit = <2400000 2500000>, <5170000 5835000>;
+};

target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1-ubi.dts

@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: (GL-2.0 OR MIT)
+
+#include "mt7986b-mercusys-mr90x-v1-common.dtsi"
+
+/ {
+	compatible = "mercusys,mr90x-v1-ubi", "mediatek,mt7986b";
+	model = "MERCUSYS MR90X v1 (UBI)";
+};
+
+&aliases {
+	label-mac-device = &gmac0;
+};
+
+&chosen {
+	bootargs-append = " root=/dev/fit0 rootwait";
+	rootdisk = <&ubi_fit>;
+};
+
+&gmac0 {
+	nvmem-cells = <&macaddr_factory_8000 0>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&macaddr_factory_8000 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&partitions {
+	partition@0 {
+		label = "boot";
+		reg = <0x0 0x200000>;
+		read-only;
+
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bl2";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "factory";
+			reg = <0x100000 0x100000>;
+			read-only;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				eeprom_factory_0: eeprom@0 {
+					reg = <0x0 0x1000>;
+				};
+
+				macaddr_factory_8000: macaddr@8000 {
+					compatible = "mac-base";
+					reg = <0x8000 0x6>;
+					#nvmem-cell-cells = <1>;
+				};
+			};
+		};
+	};
+
+	partition@200000 {
+		compatible = "linux,ubi";
+		reg = <0x200000 0x7e00000>;
+		label = "ubi";
+
+		volumes {
+			ubi_fit: ubi-volume-fit {
+				volname = "fit";
+			};
+
+			ubi_ubootenv: ubi-volume-ubootenv {
+				volname = "ubootenv";
+			};
+
+			ubi_ubootenv2: ubi-volume-ubootenv2 {
+				volname = "ubootenv2";
+			};
+		};
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&ubi_ubootenv {
+	nvmem-layout {
+		compatible = "u-boot,env-redundant-bool";
+	};
+};
+
+&ubi_ubootenv2 {
+	nvmem-layout {
+		compatible = "u-boot,env-redundant-bool";
+	};
+};
+
+&wifi {
+	nvmem-cells = <&eeprom_factory_0>;
+	nvmem-cell-names = "eeprom";
+
+	band@0 {
+		reg = <0>;
+		nvmem-cells = <&macaddr_factory_8000 0>;
+		nvmem-cell-names = "mac-address";
+	};
+
+	band@1 {
+		reg = <1>;
+		nvmem-cells = <&macaddr_factory_8000 (-1)>;
+		nvmem-cell-names = "mac-address";
+	};
+};

target/linux/mediatek/dts/mt7986b-mercusys-mr90x-v1.dts

@@ -1,286 +1,44 @@
 // SPDX-License-Identifier: (GL-2.0 OR MIT)
 
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
-
-#include "mt7986b.dtsi"
+#include "mt7986b-mercusys-mr90x-v1-common.dtsi"
 
 / {
 	compatible = "mercusys,mr90x-v1", "mediatek,mt7986b";
 	model = "MERCUSYS MR90X v1";
-
-	aliases {
-		serial0 = &uart0;
-
-		led-boot = &led_status_green;
-		led-failsafe = &led_status_green;
-		led-running = &led_status_green;
-		led-upgrade = &led_status_green;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory {
-		reg = <0 0x40000000 0 0x20000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-	 	led-0 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_LAN;
-			function-enumerator = <2>;
-			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
-		};
-
-		led-1 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_LAN;
-			function-enumerator = <1>;
-			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
-		};
-
-		led-2 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_LAN;
-			function-enumerator = <0>;
-			gpios = <&pio 12 GPIO_ACTIVE_LOW>;
-		};
-
-		led-3 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_WAN;
-			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
-		};
-
-		led-4 {
-			color = <LED_COLOR_ID_AMBER>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
-			panic-indicator;
-		};
-
-		led_status_green: led-5 {
-			color = <LED_COLOR_ID_GREEN>;
-			function = LED_FUNCTION_STATUS;
-			gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
-&crypto {
-	status = "okay";
-};
-
-&eth {
-	status = "okay";
-
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "2500base-x";
-
-		fixed-link {
-			speed = <2500>;
-			full-duplex;
-			pause;
-		};
+&partitions {
+	partition@0 {
+		label = "boot";
+		reg = <0x0 0x200000>;
+		read-only;
 	};
 
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-handle = <&phy6>;
-		phy-mode = "2500base-x";
+	partition@200000 {
+		label = "u-boot-env";
+		reg = <0x200000 0x100000>;
 	};
 
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	partition@300000 {
+		label = "ubi0";
+		reg = <0x300000 0x3200000>;
 	};
-};
-
-&mdio {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
-	reset-delay-us = <1500000>;
-	reset-post-delay-us = <1000000>;
 
-	/* WAN/LAN 2.5Gbps phy
-	   MaxLinear GPY211C0VC (SLNW8) */
-	phy6: phy@6 {
-		compatible = "ethernet-phy-ieee802.3-c45";
-		reg = <6>;
+	partition@3500000 {
+		label = "ubi1";
+		reg = <0x3500000 0x3200000>;
+		read-only;
 	};
 
-	switch: switch@1f {
-		compatible = "mediatek,mt7531";
-		reg = <31>;
-		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
+	partition@6700000 {
+		label = "userconfig";
+		reg = <0x6700000 0x800000>;
+		read-only;
 	};
-};
-
-&switch {
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* WAN/LAN 1Gbps port */
-		port@0 {
-			reg = <0>;
-			label = "lan0";
-		};
 
-		/* LAN1 port */
-		port@1 {
-			reg = <1>;
-			label = "lan1";
-		};
-
-		/* LAN2 port */
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-		};
-
-		port@6 {
-			reg = <6>;
-			ethernet = <&gmac0>;
-			phy-mode = "2500base-x";
-
-			fixed-link {
-				speed = <2500>;
-				full-duplex;
-				pause;
-			};
-		};
-	};
-};
-
-&pio {
-	spi_flash_pins: spi-flash-pins-33-to-38 {
-		mux {
-			function = "spi";
-			groups = "spi0", "spi0_wp_hold";
-		};
-		conf-pu {
-			pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
-			drive-strength = <8>;
-			mediatek,pull-up-adv = <0>; /* bias-disable */
-		};
-		conf-pd {
-			pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
-			drive-strength = <8>;
-			mediatek,pull-down-adv = <0>; /* bias-disable */
-		};
-	};
-
-	wf_2g_5g_pins: wf_2g_5g-pins {
-		mux {
-			function = "wifi";
-			groups = "wf_2g", "wf_5g";
-		};
-		conf {
-			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-			       "WF1_TOP_CLK", "WF1_TOP_DATA";
-			drive-strength = <4>;
-		};
-	};
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi_flash_pins>;
-	status = "okay";
-
-	spi_nand_flash: flash@0 {
-		compatible = "spi-nand";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-
-		spi-max-frequency = <20000000>;
-		spi-tx-bus-width = <4>;
-		spi-rx-bus-width = <4>;
-
-		partitions: partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot";
-				reg = <0x0 0x200000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "u-boot-env";
-				reg = <0x200000 0x100000>;
-			};
-
-			partition@300000 {
-				label = "ubi0";
-				reg = <0x300000 0x3200000>;
-			};
-
-			partition@3500000 {
-				label = "ubi1";
-				reg = <0x3500000 0x3200000>;
-				read-only;
-			};
-
-			partition@6700000 {
-				label = "userconfig";
-				reg = <0x6700000 0x800000>;
-				read-only;
-			};
-
-			partition@6f00000 {
-				label = "tp_data";
-				reg = <0x6f00000 0x400000>;
-				read-only;
-			};
-		};
+	partition@6f00000 {
+		label = "tp_data";
+		reg = <0x6f00000 0x400000>;
+		read-only;
 	};
 };
-
-&trng {
-	status = "okay";
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};
-
-&wifi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&wf_2g_5g_pins>;
-};

target/linux/mediatek/filogic/base-files/etc/board.d/01_leds

@@ -49,7 +49,8 @@ glinet,gl-xe3000)
 	ucidef_set_led_netdev "wlan2g" "WLAN2G" "green:wifi2g" "phy0-ap0"
 	ucidef_set_led_netdev "wlan5g" "WLAN5G" "green:wifi5g" "phy1-ap0"
 	;;
-mercusys,mr90x-v1)
+mercusys,mr90x-v1|\
+mercusys,mr90x-v1-ubi)
 	ucidef_set_led_netdev "lan-0" "lan-0" "green:lan-0" "lan0" "link tx rx"
 	ucidef_set_led_netdev "lan-1" "lan-1" "green:lan-1" "lan1" "link tx rx"
 	ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx"

target/linux/mediatek/filogic/base-files/etc/board.d/02_network

@@ -99,7 +99,8 @@ mediatek_setup_interfaces()
 	mediatek,mt7988a-rfb)
 		ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 eth2" eth1
 		;;
-	mercusys,mr90x-v1)
+	mercusys,mr90x-v1|\
+	mercusys,mr90x-v1-ubi)
 		ucidef_set_interfaces_lan_wan "lan0 lan1 lan2" eth1
 		;;
 	smartrg,sdg-8622|\

target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh

@@ -76,6 +76,7 @@ platform_do_upgrade() {
 	jdcloud,re-cp-03|\
 	mediatek,mt7981-rfb|\
 	mediatek,mt7988a-rfb|\
+	mercusys,mr90x-v1-ubi|\
 	nokia,ea0326gmp|\
 	openwrt,one|\
 	netcore,n60|\

target/linux/mediatek/image/filogic.mk

@@ -1059,6 +1059,34 @@ define Device/mercusys_mr90x-v1
 endef
 TARGET_DEVICES += mercusys_mr90x-v1
 
+define Device/mercusys_mr90x-v1-ubi
+  DEVICE_VENDOR := MERCUSYS
+  DEVICE_MODEL := MR90X v1 (UBI)
+  DEVICE_DTS := mt7986b-mercusys-mr90x-v1-ubi
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTC_FLAGS := --pad 4096
+  DEVICE_DTS_LOADADDR := 0x43f00000
+  DEVICE_PACKAGES := kmod-mt7915e kmod-mt7986-firmware mt7986-wo-firmware
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGES := sysupgrade.itb
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | \
+	pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | \
+	fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | \
+	append-metadata
+  ARTIFACTS := bl31-uboot.fip preloader.bin
+  ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot mercusys_mr90x-v1
+  ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ubi-ddr3
+endef
+TARGET_DEVICES += mercusys_mr90x-v1-ubi
+
 define Device/netcore_n60
   DEVICE_VENDOR := Netcore
   DEVICE_MODEL := N60