Adm5120 NAPI polling support and fixes by Thomas Langer and Friedrich Beckmann

SVN-Revision: 8013

target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c

@@ -5,6 +5,12 @@
  *
  *	Inspiration for this driver came from the original ADMtek 2.4
  *	driver, Copyright ADMtek Inc.
+ *
+ *	NAPI extensions by Thomas Langer ([email protected])
+ *	and Friedrich Beckmann ([email protected]), 2007
+ *
+ *	TODO: Add support of high prio queues (currently disabled)
+ *
  */
 #include <linux/autoconf.h>
 #include <linux/module.h>
@@ -48,6 +54,9 @@ static unsigned char bw_matrix[SW_DEVS] = {
 static int adm5120_nrdevs;
 
 static struct net_device *adm5120_devs[SW_DEVS];
+/* Lookup table port -> device */
+static struct net_device *adm5120_port[SW_DEVS];
+
 static struct adm5120_dma
     adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))),
     adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))),
@@ -62,13 +71,9 @@ static struct sk_buff
     *adm5120_skb_rxl[ADM5120_DMA_RXL],
     *adm5120_skb_txh[ADM5120_DMA_TXH],
     *adm5120_skb_txl[ADM5120_DMA_TXL];
-static int adm5120_rxhi = 0;
 static int adm5120_rxli = 0;
-/* We don't use high priority tx for now */
-/*static int adm5120_txhi = 0;*/
 static int adm5120_txli = 0;
-static int adm5120_txhit = 0;
-static int adm5120_txlit = 0;
+/*static int adm5120_txhi = 0;*/
 static int adm5120_if_open = 0;
 
 static inline void adm5120_set_reg(unsigned int reg, unsigned long val)
@@ -81,47 +86,50 @@ static inline unsigned long adm5120_get_reg(unsigned int reg)
 	return *(volatile unsigned long*)(SW_BASE+reg);
 }
 
-static inline void adm5120_rxfixup(struct adm5120_dma *dma,
-    struct sk_buff **skbl, int num)
+static inline void adm5120_rx_dma_update(struct adm5120_dma *dma,
+	struct sk_buff *skb, int end)
 {
-	int i;
-
-	/* Resubmit the entire ring */
-	for (i=0; i<num; i++) {
-		dma[i].status = 0;
-		dma[i].cntl = 0;
-		dma[i].len = ADM5120_DMA_RXSIZE;
-		dma[i].data = ADM5120_DMA_ADDR(skbl[i]->data) |
-		     ADM5120_DMA_OWN | (i==num-1 ? ADM5120_DMA_RINGEND : 0);
-	}
+	dma->status = 0;
+	dma->cntl = 0;
+	dma->len = ADM5120_DMA_RXSIZE;
+	dma->data = ADM5120_DMA_ADDR(skb->data) |
+		ADM5120_DMA_OWN | (end ? ADM5120_DMA_RINGEND : 0);
 }
 
-static inline void adm5120_rx(struct adm5120_dma *dma, struct sk_buff **skbl,
-    int *index, int num)
+static int adm5120_rx(struct net_device *dev,int *budget)
 {
 	struct sk_buff *skb, *skbn;
 	struct adm5120_sw *priv;
-	struct net_device *dev;
-	int port, vlan, len;
-
-	while (!(dma[*index].data & ADM5120_DMA_OWN)) {
-		port = (dma[*index].status & ADM5120_DMA_PORTID);
+	struct net_device *cdev;
+	struct adm5120_dma *dma;
+	int port, len, quota;
+
+	quota = min(dev->quota, *budget);
+	dma = &adm5120_dma_rxl[adm5120_rxli];
+	while (!(dma->data & ADM5120_DMA_OWN) && quota) {
+		port = (dma->status & ADM5120_DMA_PORTID);
 		port >>= ADM5120_DMA_PORTSHIFT;
-		for (vlan = 0; vlan < adm5120_nrdevs; vlan++) {
-			if ((1<<port) & vlan_matrix[vlan])
-				break;
+		cdev = adm5120_port[port];
+		if (cdev != dev) {      /* The current packet belongs to a different device */
+			if ((cdev==NULL) || !netif_running(cdev)) {
+				/* discard (update with old skb) */
+				skb = skbn = NULL;
+				goto rx_skip;
+			}
+			else {
+				netif_rx_schedule(cdev);/* Start polling next device */
+				return 1;       /* return 1 -> More packets to process */
+			}
+
 		}
-		if (vlan == adm5120_nrdevs)
-			vlan = 0;
-		dev = adm5120_devs[vlan];
-		skb = skbl[*index];
-		len = (dma[*index].status & ADM5120_DMA_LEN);
+		skb = adm5120_skb_rxl[adm5120_rxli];
+		len = (dma->status & ADM5120_DMA_LEN);
 		len >>= ADM5120_DMA_LENSHIFT;
 		len -= ETH_FCS;
 
 		priv = netdev_priv(dev);
 		if (len <= 0 || len > ADM5120_DMA_RXSIZE ||
-		    dma[*index].status & ADM5120_DMA_FCSERR) {
+			dma->status & ADM5120_DMA_FCSERR) {
 			priv->stats.rx_errors++;
 			skbn = NULL;
 		} else {
@@ -133,69 +141,80 @@ static inline void adm5120_rx(struct adm5120_dma *dma, struct sk_buff **skbl,
 				skb->ip_summed = CHECKSUM_UNNECESSARY;
 				dev->last_rx = jiffies;
 				priv->stats.rx_packets++;
-				priv->stats.rx_bytes+=len;
-				skb_reserve(skbn, 2);
-				skbl[*index] = skbn;
+				priv->stats.rx_bytes += len;
+				skb_reserve(skbn, NET_IP_ALIGN);
+				adm5120_skb_rxl[adm5120_rxli] = skbn;
 			} else {
 				printk(KERN_INFO "%s recycling!\n", dev->name);
 			}
 		}
+rx_skip:
+		adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
+			adm5120_skb_rxl[adm5120_rxli],
+			(ADM5120_DMA_RXL-1==adm5120_rxli));
+		if (ADM5120_DMA_RXL == ++adm5120_rxli)
+			adm5120_rxli = 0;
+		dma = &adm5120_dma_rxl[adm5120_rxli];
+		if (skbn){
+			netif_receive_skb(skb);
+			dev->quota--;
+			(*budget)--;
+			quota--;
+		}
+	} /* while */
+	/* If there are still packets to process, return 1 */
+	if (quota){
+		/* No more packets to process, so disable the polling and reenable the interrupts */
+		netif_rx_complete(dev);
+		adm5120_set_reg(ADM5120_INT_MASK,
+			adm5120_get_reg(ADM5120_INT_MASK) &
+			~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
+		return 0;
 
-		dma[*index].status = 0;
-		dma[*index].cntl = 0;
-		dma[*index].len = ADM5120_DMA_RXSIZE;
-		dma[*index].data = ADM5120_DMA_ADDR(skbl[*index]->data) |
-		     ADM5120_DMA_OWN |
-		     (num-1==*index ? ADM5120_DMA_RINGEND : 0);
-		if (num == ++*index)
-			*index = 0;
-		if (skbn)
-			netif_rx(skb);
-	}
-}
 
-static inline void adm5120_tx(struct adm5120_dma *dma, struct sk_buff **skbl,
-    int *index, int num)
-{
-	while((dma[*index].data & ADM5120_DMA_OWN) == 0 && skbl[*index]) {
-		dev_kfree_skb_irq(skbl[*index]);
-		skbl[*index] = NULL;
-		if (++*index == num)
-			*index = 0;
 	}
+	return 1;
 }
 
 static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
 {
-	unsigned long intreg;
-
-	adm5120_set_reg(ADM5120_INT_MASK,
-	    adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTHANDLE);
-
-	intreg = adm5120_get_reg(ADM5120_INT_ST);
-	adm5120_set_reg(ADM5120_INT_ST, intreg);
-
-	if (intreg & ADM5120_INT_RXH)
-		adm5120_rx(adm5120_dma_rxh, adm5120_skb_rxh, &adm5120_rxhi,
-		ADM5120_DMA_RXH);
-	if (intreg & ADM5120_INT_HFULL)
-		adm5120_rxfixup(adm5120_dma_rxh, adm5120_skb_rxh,
-		ADM5120_DMA_RXH);
-	if (intreg & ADM5120_INT_RXL)
-		adm5120_rx(adm5120_dma_rxl, adm5120_skb_rxl, &adm5120_rxli,
-		    ADM5120_DMA_RXL);
-	if (intreg & ADM5120_INT_LFULL)
-		adm5120_rxfixup(adm5120_dma_rxl, adm5120_skb_rxl,
-		ADM5120_DMA_RXL);
-	if (intreg & ADM5120_INT_TXH)
-		adm5120_tx(adm5120_dma_txh, adm5120_skb_txh, &adm5120_txhit,
-		ADM5120_DMA_TXH);
-	if (intreg & ADM5120_INT_TXL)
-		adm5120_tx(adm5120_dma_txl, adm5120_skb_txl, &adm5120_txlit,
-		ADM5120_DMA_TXL);
-
-	adm5120_set_reg(ADM5120_INT_MASK,
-	    adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+	unsigned long intreg, intmask;
+	int port;
+	struct net_device *dev;
+
+	intmask = adm5120_get_reg(ADM5120_INT_MASK);   /* Remember interrupt mask */
+	adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL); /* Disable interrupts */
+
+	intreg = adm5120_get_reg(ADM5120_INT_ST); /* Read interrupt status */
+	adm5120_set_reg(ADM5120_INT_ST, intreg);  /* Clear interrupt status */
+
+	/* In NAPI operation the interrupts are disabled and the polling mechanism
+	 * is activated. The interrupts are finally enabled again in the polling routine.
+	 */
+	if (intreg & (ADM5120_INT_RXL|ADM5120_INT_LFULL)) {
+		/* check rx buffer for port number */
+		port = adm5120_dma_rxl[adm5120_rxli].status & ADM5120_DMA_PORTID;
+		port >>= ADM5120_DMA_PORTSHIFT;
+		dev = adm5120_port[port];
+		if ((dev==NULL) || !netif_running(dev)) {
+		/* discard (update with old skb) */
+			adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli],
+				adm5120_skb_rxl[adm5120_rxli],
+				(ADM5120_DMA_RXL-1==adm5120_rxli));
+			if (ADM5120_DMA_RXL == ++adm5120_rxli)
+				adm5120_rxli = 0;
+		}
+		else {
+			netif_rx_schedule(dev);
+			intmask |= (ADM5120_INT_RXL|ADM5120_INT_LFULL); /* Disable RX interrupts */
+		}
+	}
+#ifdef CONFIG_DEBUG
+	if (intreg & ~(intmask))
+		printk(KERN_INFO "adm5120sw: IRQ 0x%08X unexpected!\n", (unsigned int)(intreg & ~(intmask)));
+#endif
+
+	adm5120_set_reg(ADM5120_INT_MASK, intmask);
 
 	return IRQ_HANDLED;
 }
@@ -203,11 +222,20 @@ static irqreturn_t adm5120_sw_irq(int irq, void *dev_id)
 static void adm5120_set_vlan(char *matrix)
 {
 	unsigned long val;
+	int vlan_port, port;
 
 	val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
 	adm5120_set_reg(ADM5120_VLAN_GI, val);
 	val = matrix[4] + (matrix[5]<<8);
 	adm5120_set_reg(ADM5120_VLAN_GII, val);
+	/* Now set/update the port vs. device lookup table */
+	for (port=0; port<SW_DEVS; port++) {
+		for (vlan_port=0; vlan_port<SW_DEVS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
+		if (vlan_port <SW_DEVS)
+			adm5120_port[port] = adm5120_devs[vlan_port];
+		else
+			adm5120_port[port] = NULL;
+	}
 }
 
 static void adm5120_set_bw(char *matrix)
@@ -225,70 +253,143 @@ static void adm5120_set_bw(char *matrix)
 	else
 		adm5120_set_reg(ADM5120_BW_CTL1, val & ~0x8000000);
 
-	printk(KERN_DEBUG "D: ctl0 0x%x, ctl1 0x%x\n",
+	printk(KERN_DEBUG "D: ctl0 0x%lx, ctl1 0x%lx\n",
 		adm5120_get_reg(ADM5120_BW_CTL0),
 		adm5120_get_reg(ADM5120_BW_CTL1));
 }
 
 static int adm5120_sw_open(struct net_device *dev)
 {
-	if (!adm5120_if_open++)
-		adm5120_set_reg(ADM5120_INT_MASK,
-		    adm5120_get_reg(ADM5120_INT_MASK) & ~ADM5120_INTHANDLE);
+	unsigned long val;
+	int i;
+	
 	netif_start_queue(dev);
+	if (!adm5120_if_open++) {
+		/* enable interrupts on first open */
+		adm5120_set_reg(ADM5120_INT_MASK,
+			adm5120_get_reg(ADM5120_INT_MASK) &
+			~(ADM5120_INT_RXL|ADM5120_INT_LFULL));
+	}
+	/* enable (additional) port */
+	val = adm5120_get_reg(ADM5120_PORT_CONF0);
+	for (i=0; i<SW_DEVS; i++) {
+		if (dev == adm5120_devs[i])
+			val &= ~vlan_matrix[i];
+	}
+	adm5120_set_reg(ADM5120_PORT_CONF0, val);
 	return 0;
 }
 
 static int adm5120_sw_stop(struct net_device *dev)
 {
+	unsigned long val;
+	int i;
+	
+	if (!--adm5120_if_open) {
+		adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL);
+	}
+	/* disable port if not assigned to other devices */
+	val = adm5120_get_reg(ADM5120_PORT_CONF0) | ADM5120_PORTDISALL;
+	for (i=0; i<SW_DEVS; i++) {
+		if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
+			val &= ~vlan_matrix[i];
+	}
+	adm5120_set_reg(ADM5120_PORT_CONF0, val);
 	netif_stop_queue(dev);
-	if (!--adm5120_if_open)
-		adm5120_set_reg(ADM5120_INT_MASK,
-		    adm5120_get_reg(ADM5120_INT_MASK) | ADM5120_INTMASKALL);
 	return 0;
 }
 
 static int adm5120_sw_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct adm5120_dma *dma = adm5120_dma_txl;
+	struct adm5120_dma *dma;
 	struct sk_buff **skbl = adm5120_skb_txl;
 	struct adm5120_sw *priv = netdev_priv(dev);
-	int *index = &adm5120_txli;
-	int num = ADM5120_DMA_TXL;
-	int trigger = ADM5120_SEND_TRIG_L;
+	unsigned long data;
 
 	dev->trans_start = jiffies;
-	if (dma[*index].data & ADM5120_DMA_OWN) {
+	dma = &adm5120_dma_txl[adm5120_txli];
+	if (dma->data & ADM5120_DMA_OWN) {
+		/* We want to write a packet but the TX queue is still
+		 * occupied by the DMA. We are faster than the DMA... */
 		dev_kfree_skb(skb);
 		priv->stats.tx_dropped++;
 		return 0;
 	}
-
-	dma[*index].data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
-	if (*index == num-1)
-		dma[*index].data |= ADM5120_DMA_RINGEND;
-	dma[*index].status =
+	data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN;
+	if (adm5120_txli == ADM5120_DMA_TXL-1)
+		data |= ADM5120_DMA_RINGEND;
+	dma->status =
 	    ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << ADM5120_DMA_LENSHIFT) |
 	    (0x1 << priv->port);
-	dma[*index].len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+	
+	dma->len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
 	priv->stats.tx_packets++;
 	priv->stats.tx_bytes += skb->len;
-	skbl[*index]=skb;
 
-	if (++*index == num)
-		*index = 0;
-	adm5120_set_reg(ADM5120_SEND_TRIG, trigger);
+	/* free old skbs here instead of tx completion interrupt:
+	 * will hold some more memory allocated but reduces interrupts */
+	if (skbl[adm5120_txli]){
+		dev_kfree_skb(skbl[adm5120_txli]);
+	}
+	skbl[adm5120_txli] = skb;
 
+	dma->data = data; /* Here we enable the buffer for the TX DMA machine */
+	adm5120_set_reg(ADM5120_SEND_TRIG, ADM5120_SEND_TRIG_L);
+	if (++adm5120_txli == ADM5120_DMA_TXL)
+		adm5120_txli = 0;
 	return 0;
 }
 
 static void adm5120_tx_timeout(struct net_device *dev)
 {
-	netif_wake_queue(dev);
+	printk(KERN_INFO "%s: TX timeout\n",dev->name);
 }
 
 static struct net_device_stats *adm5120_sw_stats(struct net_device *dev)
 {
+	struct adm5120_sw *priv = netdev_priv(dev);
+	int portmask;
+	unsigned long adm5120_cpup_conf_reg;
+
+	portmask = vlan_matrix[priv->port] & 0x3f;
+
+	adm5120_cpup_conf_reg = adm5120_get_reg(ADM5120_CPUP_CONF);
+
+	if (dev->flags & IFF_PROMISC)
+		adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL);
+	else
+		adm5120_cpup_conf_reg |= (portmask << ADM5120_DISUNSHIFT);
+
+	if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || dev->mc_count)
+		adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL);
+	else
+		adm5120_cpup_conf_reg |= (portmask << ADM5120_DISMCSHIFT);
+
+		/* If there is any port configured to be in promiscuous mode, then the */
+		/* Bridge Test Mode has to be activated. This will result in           */
+		/* transporting also packets learned in another VLAN to be forwarded   */
+		/* to the CPU.                                                         */
+		/* The difficult scenario is when we want to build a bridge on the CPU.*/
+		/* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
+		/* CPU port in VLAN1. Now we build a bridge on the CPU between         */
+		/* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
+		/* Now assume a packet with ethernet source address 99 enters port 0   */
+		/* It will be forwarded to the CPU because it is unknown. Then the     */
+		/* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
+		/* When now a packet with ethernet destination address 99 comes in at  */
+		/* port 1 in VLAN1, then the switch has learned that this address is   */
+		/* located at port 0 in VLAN0. Therefore the switch will drop          */
+		/* this packet. In order to avoid this and to send the packet still    */
+		/* to the CPU, the Bridge Test Mode has to be activated.               */
+
+		/* Check if there is any vlan in promisc mode. */
+	if (~adm5120_cpup_conf_reg & ADM5120_DISUNALL)
+		adm5120_cpup_conf_reg |= ADM5120_BTM;  /* Set the BTM     */
+	else
+		adm5120_cpup_conf_reg &= ~ADM5120_BTM; /* Disable the BTM */
+
+	adm5120_set_reg(ADM5120_CPUP_CONF,adm5120_cpup_conf_reg);
+
 	return &((struct adm5120_sw *)netdev_priv(dev))->stats;
 }
 
@@ -390,33 +491,29 @@ static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 	return 0;
 }
 
-static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
     int num)
 {
 	memset(dma, 0, sizeof(struct adm5120_dma)*num);
 	dma[num-1].data |= ADM5120_DMA_RINGEND;
-	memset(skb, 0, sizeof(struct skb*)*num);
+	memset(skbl, 0, sizeof(struct skb*)*num);
 }
 
-static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skb,
+static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skbl,
     int num)
 {
 	int i;
 
 	memset(dma, 0, sizeof(struct adm5120_dma)*num);
 	for (i=0; i<num; i++) {
-		skb[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
-		if (!skb[i]) {
+		skbl[i] = dev_alloc_skb(ADM5120_DMA_RXSIZE+16);
+		if (!skbl[i]) {
 			i=num;
 			break;
 		}
-		skb_reserve(skb[i], 2);
-		dma[i].data = ADM5120_DMA_ADDR(skb[i]->data) | ADM5120_DMA_OWN;
-		dma[i].cntl = 0;
-		dma[i].len = ADM5120_DMA_RXSIZE;
-		dma[i].status = 0;
+		skb_reserve(skbl[i], NET_IP_ALIGN);
+		adm5120_rx_dma_update(&dma[i], skbl[i], (num-1==i));
 	}
-	dma[i-1].data |= ADM5120_DMA_RINGEND;
 }
 
 static int __init adm5120_sw_init(void)
@@ -433,7 +530,7 @@ static int __init adm5120_sw_init(void)
 	adm5120_set_reg(ADM5120_CPUP_CONF,
 	    ADM5120_DISCCPUPORT | ADM5120_CRC_PADDING |
 	    ADM5120_DISUNALL | ADM5120_DISMCALL);
-	adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP);
+	adm5120_set_reg(ADM5120_PORT_CONF0, ADM5120_ENMC | ADM5120_ENBP | ADM5120_PORTDISALL);
 
 	adm5120_set_reg(ADM5120_PHY_CNTL2, adm5120_get_reg(ADM5120_PHY_CNTL2) |
 	    ADM5120_AUTONEG | ADM5120_NORMAL | ADM5120_AUTOMDIX);
@@ -457,8 +554,6 @@ static int __init adm5120_sw_init(void)
 	adm5120_set_reg(ADM5120_RECEIVE_HBADDR, KSEG1ADDR(adm5120_dma_rxh));
 	adm5120_set_reg(ADM5120_RECEIVE_LBADDR, KSEG1ADDR(adm5120_dma_rxl));
 
-	adm5120_set_vlan(vlan_matrix);
-
 	for (i=0; i<adm5120_nrdevs; i++) {
 		adm5120_devs[i] = alloc_etherdev(sizeof(struct adm5120_sw));
 		if (!adm5120_devs[i]) {
@@ -481,6 +576,8 @@ static int __init adm5120_sw_init(void)
 		dev->tx_timeout = adm5120_tx_timeout;
 		dev->watchdog_timeo = ETH_TX_TIMEOUT;
 		dev->set_mac_address = adm5120_sw_set_mac_address;
+		dev->poll = adm5120_rx;
+		dev->weight = 64;
 
 		memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
 		adm5120_write_mac(dev);
@@ -491,6 +588,9 @@ static int __init adm5120_sw_init(void)
 		}
 		printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i);
 	}
+	/* setup vlan/port mapping after devs are filled up */
+	adm5120_set_vlan(vlan_matrix);
+
 	adm5120_set_reg(ADM5120_CPUP_CONF,
 	    ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL);
 

target/linux/adm5120-2.6/files/drivers/net/adm5120sw.h

@@ -13,14 +13,17 @@
 #define SW_BASE	KSEG1ADDR(0x12000000)
 #define SW_DEVS	6
 
-#define ETH_TX_TIMEOUT	HZ/4
+#define ETH_TX_TIMEOUT		HZ*400
 #define ETH_FCS 4;
 
 #define ADM5120_CODE		0x00		/* CPU description */
 #define ADM5120_CODE_PQFP	0x20000000	/* package type */
+#define ADM5120_SW_CONF		0x20            /* Switch configuration register */
+#define ADM5120_SW_CONF_BPM	0x00300000      /* Mask for backpressure mode */
 #define ADM5120_CPUP_CONF	0x24		/* CPU port config */
 #define ADM5120_DISCCPUPORT	0x00000001	/* disable cpu port */
 #define ADM5120_CRC_PADDING	0x00000002	/* software crc */
+#define ADM5120_BTM		0x00000004      /* bridge test mode */
 #define ADM5120_DISUNSHIFT	9
 #define ADM5120_DISUNALL	0x00007e00	/* disable unknown from all */
 #define ADM5120_DISMCSHIFT	16
@@ -28,6 +31,7 @@
 #define ADM5120_PORT_CONF0	0x28
 #define ADM5120_ENMC		0x00003f00	/* Enable MC routing (ex cpu) */
 #define ADM5120_ENBP		0x003f0000	/* Enable Back Pressure */
+#define ADM5120_PORTDISALL     	0x0000003F
 #define ADM5120_VLAN_GI		0x40		/* VLAN settings */
 #define ADM5120_VLAN_GII	0x44
 #define ADM5120_SEND_TRIG	0x48
@@ -81,10 +85,10 @@ struct adm5120_dma {
 #define ADM5120_DMA_LENSHIFT	16
 #define ADM5120_DMA_FCSERR	0x00000008
 
-#define ADM5120_DMA_TXH		16
+#define ADM5120_DMA_TXH		2
 #define ADM5120_DMA_TXL		64
-#define ADM5120_DMA_RXH		16
-#define ADM5120_DMA_RXL		8
+#define ADM5120_DMA_RXH		2
+#define ADM5120_DMA_RXL		64
 
 #define ADM5120_DMA_RXSIZE	1550
 #define ADM5120_DMA_EXTRA	20