ramips: improve edimax 6200n/nl support

Assign the reset functionality to the wps/reset buttons. Use the wlan
switch of the 6200n to enable/disable wlan.

Add the internet led of the 6200nl and use the led for boot status
indication

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ramips/base-files/etc/board.d/01_leds

@@ -26,6 +26,9 @@ case $board in
 	set_usb_led "$board:blue:3g"
 	;;
 3g-6200nl|\
+wnce2001)
+	set_wifi_led "$board:green:wlan"
+	;;
 br-6475nd|\
 mzk-w300nh2)
 	set_wifi_led "$board:amber:wlan"
@@ -306,9 +309,6 @@ whr-600d)
 	ucidef_set_led_default "power" "power" "$board:green:power" "1"
 	ucidef_set_led_default "router" "router" "$board:green:router" "1"
 	;;
-wnce2001)
-	set_wifi_led "$board:green:wlan"
-	;;
 wrh-300cr)
 	set_wifi_led "$board:green:wlan"
 	ucidef_set_led_netdev "lan" "lan" "$board:green:ethernet" "eth0"

target/linux/ramips/base-files/etc/diag.sh

@@ -36,6 +36,9 @@ get_status_led() {
 	xdxrn502j)
 		status_led="$board:green:power"
 		;;
+	3g-6200nl)
+		status_led="$board:green:internet"
+		;;
 	a5-v11|\
 	cs-qr10|\
 	d105|\

target/linux/ramips/dts/3G-6200N.dts

@@ -69,16 +69,16 @@
 		#size-cells = <0>;
 		poll-interval = <20>;
 
-		wps {
-			label = "wps";
+		reset {
+			label = "reset";
 			gpios = <&gpio0 12 1>;
-			linux,code = <0x211>;
+			linux,code = <0x198>;
 		};
 
-		wlanswitch {
+		rfkill {
 			label = "wlanswitch";
 			gpios = <&gpio0 13 1>;
-			linux,code = <0x100>;
+			linux,code = <0xf7>;
 		};
 	};
 };

target/linux/ramips/dts/3G-6200NL.dts

@@ -47,8 +47,13 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
+		internet {
+			label = "3g-6200nl:green:internet";
+			gpios = <&gpio0 9 1>;
+		};
+
 		wlan {
-			label = "3g-6200nl:amber:wlan";
+			label = "3g-6200nl:green:wlan";
 			gpios = <&gpio0 14 1>;
 		};
 	};
@@ -59,10 +64,10 @@
 		#size-cells = <0>;
 		poll-interval = <20>;
 
-		wps {
-			label = "wps";
+		reset {
+			label = "reset";
 			gpios = <&gpio0 12 1>;
-			linux,code = <0x211>;
+			linux,code = <0x198>;
 		};
 	};
 };