kirkwood: use real model names for Linksys devices

This replaces the internal device names "Audi" and "Viper" with the
real model names, which a user would look for. This makes the
Linksys devices on this target consistent with the names recently
changed for mvebu based on the same idea.

As a consequence, the "viper" device definition is split into two
separate definitions with the correct names for both real models.

Signed-off-by: Adrian Schmutzler <[email protected]>

package/boot/uboot-envtools/files/kirkwood

@@ -17,7 +17,8 @@ checkpoint,l-50|\
 cloudengines,pogoe02|\
 cloudengines,pogoplugv4|\
 iom,ix2-200|\
-linksys,viper|\
+linksys,e4200-v2|\
+linksys,ea4500|\
 raidsonic,ib-nas62x0|\
 seagate,dockstar|\
 zyxel,nsa310b|\
@@ -25,7 +26,7 @@ zyxel,nsa310s|\
 zyxel,nsa325)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
 	;;
-linksys,audi)
+linksys,ea3500)
 	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x4000" "0x4000"
 	;;
 esac

target/linux/kirkwood/base-files/etc/board.d/01_leds

@@ -10,10 +10,11 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-"iom,ix2-200")
+iom,ix2-200)
 	ucidef_set_led_timer "health" "health" "status:white:rebuild_led" "200" "800"
 	;;
-"linksys,viper")
+linksys,e4200-v2|\
+linksys,ea4500)
 	ucidef_set_led_default "pulse" "pulse" "viper:white:pulse" "1"
 	;;
 esac

target/linux/kirkwood/base-files/etc/board.d/02_network

@@ -28,8 +28,9 @@ case "$board" in
 "zyxel,nsa310s")
 	ucidef_set_interface_lan "eth0" "dhcp"
 	;;
-"linksys,audi"|\
-"linksys,viper")
+"linksys,e4200-v2"|\
+"linksys,ea3500"|\
+"linksys,ea4500")
 	ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
 	ucidef_set_interface_macaddr "wan" $( mtd_get_mac_ascii u_env eth1addr )
 	;;

target/linux/kirkwood/base-files/etc/board.d/05_compat-version

@@ -9,8 +9,9 @@
 board_config_update
 
 case "$(board_name)" in
-	linksys,audi|\
-	linksys,viper)
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
 		ucidef_set_compat_version "1.1"
 		;;
 esac

target/linux/kirkwood/base-files/etc/init.d/bootcount

@@ -4,8 +4,9 @@ START=99
 
 boot() {
 	case $(board_name) in
-	linksys,audi|\
-	linksys,viper)
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
 		mtd resetbc s_env || true
 		;;
 	esac

target/linux/kirkwood/base-files/lib/upgrade/platform.sh

@@ -11,8 +11,9 @@ platform_do_upgrade() {
 	local board="$(board_name)"
 
 	case "$board" in
-	"linksys,audi"|\
-	"linksys,viper")
+	linksys,e4200-v2|\
+	linksys,ea3500|\
+	linksys,ea4500)
 		platform_do_upgrade_linksys "$1"
 		;;
 	*)

target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-e4200-v2.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "kirkwood-linksys-viper.dts"
+
+/ {
+	model = "Linksys E4200 v2 (Viper)";
+	compatible = "linksys,e4200-v2", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};

target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts → target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea3500.dts

@@ -15,8 +15,8 @@
 #include "kirkwood-6282.dtsi"
 
 / {
-	model = "Linksys Audi (EA3500)";
-	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+	model = "Linksys EA3500 (Audi)";
+	compatible = "linksys,ea3500", "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
 
 	memory@0 {
 		device_type = "memory";

target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-ea4500.dts

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "kirkwood-linksys-viper.dts"
+
+/ {
+	model = "Linksys EA4500 (Viper)";
+	compatible = "linksys,ea4500", "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
+};

target/linux/kirkwood/image/Makefile

@@ -96,34 +96,47 @@ define Device/iom_ix2-200
 endef
 TARGET_DEVICES += iom_ix2-200
 
-define Device/linksys_audi
-  $(Device/dsa-migration)
+define Device/linksys
   DEVICE_VENDOR := Linksys
-  DEVICE_MODEL := EA3500 (Audi)
   DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
+  KERNEL_IN_UBI :=
+  UBINIZE_OPTS := -E 5
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+endef
+
+define Device/linksys_e4200-v2
+  $(Device/linksys)
+  $(Device/dsa-migration)
+  DEVICE_MODEL := E4200
+  DEVICE_VARIANT := v2
+  DEVICE_DTS := kirkwood-e4200-v2
+  KERNEL_SIZE := 2688k
+  SUPPORTED_DEVICES += linksys,viper linksys-viper
+endef
+TARGET_DEVICES += linksys_e4200-v2
+
+define Device/linksys_ea3500
+  $(Device/linksys)
+  $(Device/dsa-migration)
+  DEVICE_MODEL := EA3500
+  DEVICE_DTS := kirkwood-ea3500
   PAGESIZE := 512
   SUBPAGESIZE := 256
   BLOCKSIZE := 16k
   KERNEL_SIZE := 2624k
-  KERNEL_IN_UBI :=
-  UBINIZE_OPTS := -E 5
-  IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
-  BOARD_NAME := linksys-audi
+  SUPPORTED_DEVICES += linksys,audi linksys-audi
 endef
-TARGET_DEVICES += linksys_audi
+TARGET_DEVICES += linksys_ea3500
 
-define Device/linksys_viper
+define Device/linksys_ea4500
+  $(Device/linksys)
   $(Device/dsa-migration)
-  DEVICE_VENDOR := Linksys
-  DEVICE_MODEL := E4200v2 / EA4500 (Viper)
-  DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
+  DEVICE_MODEL := EA4500
+  DEVICE_DTS := kirkwood-ea4500
   KERNEL_SIZE := 2688k
-  KERNEL_IN_UBI :=
-  UBINIZE_OPTS := -E 5
-  IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
-  BOARD_NAME := linksys-viper
+  SUPPORTED_DEVICES += linksys,viper linksys-viper
 endef
-TARGET_DEVICES += linksys_viper
+TARGET_DEVICES += linksys_ea4500
 
 define Device/raidsonic_ib-nas62x0
   DEVICE_VENDOR := RaidSonic