kernel: move MTD_SPLIT_SUPPORT to generic config

CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <[email protected]>

SVN-Revision: 44612

target/linux/bcm53xx/config-3.14

@@ -193,7 +193,6 @@ CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y

target/linux/bcm53xx/config-3.18

@@ -198,7 +198,6 @@ CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_PHYSMAP_OF is not set
 CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y

target/linux/brcm63xx/config-3.14

@@ -154,7 +154,6 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y

target/linux/brcm63xx/config-3.18

@@ -162,7 +162,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y

target/linux/generic/config-3.14

@@ -2135,6 +2135,7 @@ CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
 # CONFIG_MTD_SPLIT_LZMA_FW is not set
 # CONFIG_MTD_SPLIT_SEAMA_FW is not set
 CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
+CONFIG_MTD_SPLIT_SUPPORT=y
 # CONFIG_MTD_SPLIT_TRX_FW is not set
 # CONFIG_MTD_SPLIT_TPLINK_FW is not set
 # CONFIG_MTD_SPLIT_UIMAGE_FW is not set

target/linux/generic/config-3.18

@@ -2242,6 +2242,7 @@ CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
 # CONFIG_MTD_SPLIT_LZMA_FW is not set
 # CONFIG_MTD_SPLIT_SEAMA_FW is not set
 CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
+CONFIG_MTD_SPLIT_SUPPORT=y
 # CONFIG_MTD_SPLIT_TRX_FW is not set
 # CONFIG_MTD_SPLIT_TPLINK_FW is not set
 # CONFIG_MTD_SPLIT_UIMAGE_FW is not set

target/linux/generic/config-3.19

@@ -2254,6 +2254,7 @@ CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
 # CONFIG_MTD_SPLIT_LZMA_FW is not set
 # CONFIG_MTD_SPLIT_SEAMA_FW is not set
 CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
+CONFIG_MTD_SPLIT_SUPPORT=y
 # CONFIG_MTD_SPLIT_TRX_FW is not set
 # CONFIG_MTD_SPLIT_TPLINK_FW is not set
 # CONFIG_MTD_SPLIT_UIMAGE_FW is not set

target/linux/generic/config-4.0

@@ -2262,6 +2262,7 @@ CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
 # CONFIG_MTD_SPLIT_LZMA_FW is not set
 # CONFIG_MTD_SPLIT_SEAMA_FW is not set
 CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
+CONFIG_MTD_SPLIT_SUPPORT=y
 # CONFIG_MTD_SPLIT_TRX_FW is not set
 # CONFIG_MTD_SPLIT_TPLINK_FW is not set
 # CONFIG_MTD_SPLIT_UIMAGE_FW is not set

target/linux/ipq806x/config-3.18

@@ -226,7 +226,6 @@ CONFIG_MSM_MMCC_8974=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y

target/linux/kirkwood/config-3.18

@@ -206,7 +206,6 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_ORION=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 # CONFIG_MTD_UBI_BLOCK is not set

target/linux/lantiq/xrx200/config-default

@@ -42,7 +42,6 @@ CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_XWAY=y
 # CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y

target/linux/lantiq/xway/config-default

@@ -40,7 +40,6 @@ CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_PLATFORM=y
 CONFIG_MTD_NAND_XWAY=y
 # CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20

target/linux/mpc83xx/config-3.18

@@ -207,7 +207,6 @@ CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_UPM=y
 CONFIG_MTD_NAND_RB_PPC=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 # CONFIG_MTD_UBI_BLOCK is not set

target/linux/mpc85xx/config-3.18

@@ -160,7 +160,6 @@ CONFIG_MPIC_TIMER=y
 # CONFIG_MTD_CFI is not set
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 # CONFIG_NEED_DMA_MAP_STATE is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_NEED_PER_CPU_KM=y

target/linux/mpc85xx/config-3.19

@@ -160,7 +160,6 @@ CONFIG_MPIC_TIMER=y
 # CONFIG_MTD_CFI is not set
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 # CONFIG_NEED_DMA_MAP_STATE is not set
 # CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
 CONFIG_NEED_PER_CPU_KM=y

target/linux/mvebu/config-3.18

@@ -233,7 +233,6 @@ CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y

target/linux/mvebu/config-3.19

@@ -233,7 +233,6 @@ CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y

target/linux/omap/config-3.18

@@ -358,7 +358,6 @@ CONFIG_MTD_NAND_OMAP_BCH=y
 CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 # CONFIG_MWIFIEX is not set

target/linux/ramips/mt7620/config-3.18

@@ -120,7 +120,6 @@ CONFIG_MTD_NAND_MT7620=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_SPLIT_TPLINK_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y

target/linux/ramips/mt7621/config-3.18

@@ -126,7 +126,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_SPLIT_TRX_FW=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y

target/linux/ramips/mt7628/config-3.18

@@ -120,7 +120,6 @@ CONFIG_MTD_NAND_MT7620=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y

target/linux/ramips/rt305x/config-3.18

@@ -112,7 +112,6 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y

target/linux/ramips/rt3883/config-3.18

@@ -114,7 +114,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y

target/linux/realview/config-3.18

@@ -188,7 +188,6 @@ CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y

target/linux/sunxi/config-3.18

@@ -300,7 +300,6 @@ CONFIG_MMC_BLOCK=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_SUNXI=y
 CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_SPLIT_SUPPORT=y
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NAMESPACES=y

target/linux/x86/config-3.14

@@ -262,7 +262,6 @@ CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_BLOCK2MTD=y
 # CONFIG_MTD_CFI is not set
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_SPLIT_SUPPORT=y
 # CONFIG_MTD_TS5500 is not set
 CONFIG_MTRR=y
 # CONFIG_MTRR_SANITIZER is not set