at91: remove unnecessary dts files

Remove unnecessary dts files already included in the 6.1 kernel.

Signed-off-by: Mieczyslaw Nalewaj <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16058
Signed-off-by: Nick Hainke <[email protected]>

target/linux/at91/files/arch/arm/boot/dts/at91-q5xr5.dts

@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * q5xr5.dts - Device Tree file for Exegin Q5xR5 board
- *
- * Copyright (C) 2014 Owen Kirby <[email protected]>
- */
-
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-	model = "Exegin Q5x (rev5)";
-	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
-	};
-
-	memory {
-		reg = <0x20000000 0x0>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins = <2 1 0x2 0x0>; /* PC1 periph B */
-					};
-					pinctrl_spi0_npcs0: spi0_npcs0 {
-						atmel,pins = <0 3 0x1 0x0>; /* PA3 periph A */
-					};
-					pinctrl_spi0_npcs1: spi0_npcs1 {
-						atmel,pins = <2 11 0x2 0x0>; /* PC11 periph B */
-					};
-					pinctrl_spi1_npcs0: spi1_npcs0 {
-						atmel,pins = <1 3 0x1 0x0>; /* PB3 periph A */
-					};
-					pinctrl_spi1_npcs1: spi1_npcs1 {
-						atmel,pins = <2 5 0x2 0x0>; /* PC5 periph B */
-					};
-				};
-
-				spi0 {
-					pinctrl_spi0: spi0-0 {
-						atmel,pins =
-							<0 0 0x1 0x0	/* PA0 periph A SPI0_MISO pin */
-							 0 1 0x1 0x0	/* PA1 periph A SPI0_MOSI pin */
-							 0 2 0x1 0x0>;	/* PA2 periph A SPI0_SPCK pin */
-					};
-				};
-
-				spi1 {
-					pinctrl_spi1: spi1-0 {
-						atmel,pins =
-							<1 0 0x1 0x0	/* PB0 periph A SPI1_MISO pin */
-							 1 1 0x1 0x0	/* PB1 periph A SPI1_MOSI pin */
-							 1 2 0x1 0x0>;	/* PB2 periph A SPI1_SPCK pin */
-					};
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-
-			spi0: spi@fffc8000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffc8000 0x200>;
-				interrupts = <12 4 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi0>;
-				status = "okay";
-				cs-gpios = <&pioA 3 0>, <&pioC 11 1>, <0>, <0>;
-
-				m25p80@0 {
-					compatible = "sst,sst25vf040b";
-					spi-max-frequency = <20000000>;
-					reg = <0>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					at91boot@0 {
-						label = "at91boot";
-						reg = <0x0 0x4000>;
-					};
-					uenv@4000 {
-						label = "uboot-env";
-						reg = <0x4000 0x4000>;
-					};
-					uboot@8000 {
-						label = "uboot";
-						reg = <0x8000 0x3E000>;
-					};
-				};
-				spidev@1 {
-					compatible = "spidev";
-					spi-max-frequency = <2000000>;
-					reg = <1>;
-				};
-			};
-			spi1: spi@fffcc000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "atmel,at91rm9200-spi";
-				reg = <0xfffcc000 0x200>;
-				interrupts = <13 4 3>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spi1>;
-				cs-gpios = <&pioB 3 0>, <&pioC 5 1>, <0>, <0>;
-				status = "okay";
-
-				spidev@0 {
-					compatible = "spidev";
-					spi-max-frequency = <2000000>;
-					reg = <0>;
-				};
-				spidev@1 {
-					compatible = "spidev";
-					spi-max-frequency = <2000000>;
-					reg = <1>;
-				};
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-
-	flash@10000000 {
-		compatible = "cfi-flash";
-		bank-width = <2>;
-		reg = <0x10000000 0x00800000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		kernel@0 {
-			label = "kernel";
-			reg = <0x0 0x200000>;
-		};
-		rootfs@200000 {
-			label = "rootfs";
-			reg = <0x200000 0x600000>;
-		};
-	};
-};

target/linux/at91/files/arch/arm/boot/dts/lmu5000.dts

@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * lmu5000.dst - Device Tree file for CalAmp LMU5000 board
- *
- * Copyright (C) 2013 Adam Porter <[email protected]>
- */
-
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-	model = "CalAmp LMU5000";
-	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
-	};
-
-	memory {
-		reg = <0x20000000 0x4000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<2 1 0x2 0x0>;	/* PC1 periph B */
-					};
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				pinctrl-0 =
-					<&pinctrl_usart0
-					 &pinctrl_usart0_rts
-					 &pinctrl_usart0_cts
-					 &pinctrl_usart0_dtr_dsr
-					 &pinctrl_usart0_dcd
-					 &pinctrl_usart0_ri>;
-				status = "okay";
-			};
-
-			usart2: serial@fffb8000 {
-				status = "okay";
-			};
-
-			uart0: serial@fffd4000 {
-				status = "okay";
-			};
-
-			uart1: serial@fffd8000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				status = "okay";
-			};
-
-			usb1: gadget@fffa4000 {
-				atmel,vbus-gpio = <&pioC 5 0>;
-				status = "okay";
-			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
-
-			watchdog@fffffd40 {
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			kernel@0 {
-				label = "kernel";
-				reg = <0x0 0x400000>;
-			};
-
-			rootfs@400000 {
-				label = "rootfs";
-				reg = <0x400000 0x3C00000>;
-			};
-
-			user1@4000000 {
-				label = "user1";
-				reg = <0x4000000 0x2000000>;
-			};
-
-			user2@6000000 {
-				label = "user2";
-				reg = <0x6000000 0x2000000>;
-			};
-		};
-
-		usb0: ohci@500000 {
-			num-ports = <2>;
-			status = "okay";
-		};
-	};
-};

target/linux/at91/image/sam9x.mk

@@ -125,6 +125,7 @@ define Device/calamp_lmu5000
   $(Device/production)
   DEVICE_VENDOR := CalAmp
   DEVICE_MODEL := LMU5000
+  DEVICE_DTS := at91-lmu5000
   DEVICE_PACKAGES := kmod-rtc-pcf2123 kmod-usb-acm \
 	kmod-usb-serial-option kmod-usb-serial-sierrawireless \
 	kmod-pinctrl-mcp23s08-spi