ramips: mt7621: add missing regulator-boot-on

What seems to be happening is that the kernel requests an ACTIVE_LOW
gpio initially and sets it to high later based on gpios in dts.

This seems to break some devices where the bootloader sets it to high.

Fixes: e612900ae0 ("ramips: mt7621: convert usb power to regulators")

Signed-off-by: Rosen Penev <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/16877
Signed-off-by: Robert Marko <[email protected]>
(cherry picked from commit a7bc6bf7dba98c77724cb8284d21a9c77c263d56)
Link: https://github.com/openwrt/openwrt/pull/17097
Signed-off-by: Petr Štetiar <[email protected]>

target/linux/ramips/dts/mt7621_d-team_newifi-d2.dts

@@ -87,6 +87,7 @@
 		regulator-max-microvolt = <5000000>;
 		gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-boot-on;
 	};
 };
 

target/linux/ramips/dts/mt7621_humax_e10.dts

@@ -63,6 +63,7 @@
 		regulator-max-microvolt = <5000000>;
 		gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-boot-on;
 	};
 };
 

target/linux/ramips/dts/mt7621_mikrotik_routerboard-7xx.dtsi

@@ -22,6 +22,7 @@
 		regulator-max-microvolt = <5000000>;
 		gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-boot-on;
 	};
 };
 

target/linux/ramips/dts/mt7621_zyxel_lte3301-plus.dts

@@ -103,6 +103,7 @@
 		regulator-max-microvolt = <5000000>;
 		gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-boot-on;
 	};
 };
 

target/linux/ramips/dts/mt7621_zyxel_lte5398-m904.dts

@@ -101,6 +101,7 @@
 		regulator-max-microvolt = <5000000>;
 		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-boot-on;
 	};
 };