realtek: timer: Activate for RTL930x devices

Use the new timer driver for the RTL930x devices.

Signed-off-by: Olliver Schinagl <[email protected]>
[remove old clock provider, select MIPS_EXTERNAL_TIMER and refresh
kernel config]
Signed-off-by: Sander Vanheule <[email protected]>

target/linux/realtek/dts-5.15/rtl930x.dtsi

@@ -57,14 +57,6 @@
 			interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
 		};
 
-		rtl9300clock: rtl9300clock@3200 {
-			compatible = "realtek,rtl9300clock";
-			reg = <0x3200 0x10>, <0x3210 0x10>;
-
-			interrupt-parent = <&intc>;
-			interrupts = <7 5>, <8 5>;
-		};
-
 		spi0: spi@1200 {
 			compatible = "realtek,rtl8380-spi";
 			reg = <0x1200 0x100>;
@@ -73,6 +65,16 @@
 			#size-cells = <0>;
 		};
 
+		timer0: timer@3200 {
+			compatible = "realtek,rtl930x-timer", "realtek,otto-timer";
+			reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
+			      <0x3230 0x10>, <0x3240 0x10>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <7 4>, <8 4>, <9 4>, <10 4>, <11 4>;
+			clocks = <&lx_clk>;
+		};
+
 		uart0: uart@2000 {
 			compatible = "ns16550a";
 			reg = <0x2000 0x100>;

target/linux/realtek/patches-5.15/300-mips-add-rtl838x-platform.patch

@@ -25,7 +25,7 @@ Submitted-by: Birger Koblitz <[email protected]>
  platform-$(CONFIG_SGI_IP28)		+= sgi-ip22/
 --- a/arch/mips/Kconfig
 +++ b/arch/mips/Kconfig
-@@ -1053,8 +1053,59 @@ config NLM_XLP_BOARD
+@@ -1053,8 +1053,58 @@ config NLM_XLP_BOARD
  	  This board is based on Netlogic XLP Processor.
  	  Say Y here if you have a XLP based board.
  
@@ -68,8 +68,7 @@ Submitted-by: Birger Koblitz <[email protected]>
 +	bool "Realtek RTL930X based platforms"
 +	depends on RTL83XX
 +	select MIPS_CPU_SCACHE
-+	select CSRC_R4K
-+	select CEVT_RTL9300
++	select MIPS_EXTERNAL_TIMER
 +	select SYS_SUPPORTS_MULTITHREADING
 +
 +config RTL931X

target/linux/realtek/rtl930x/config-5.15

@@ -9,7 +9,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BOARD_SCACHE=y
-CONFIG_CEVT_RTL9300=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_COMMON_CLK=y
 # CONFIG_COMMON_CLK_REALTEK is not set
@@ -33,7 +32,6 @@ CONFIG_CPU_SUPPORTS_MSA=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
 CONFIG_CRYPTO_RNG2=y
-CONFIG_CSRC_R4K=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DTC=y
@@ -113,11 +111,11 @@ CONFIG_MIGRATION=y
 CONFIG_MIPS=y
 CONFIG_MIPS_ASID_BITS=8
 CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
 # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
 CONFIG_MIPS_CMDLINE_FROM_DTB=y
 CONFIG_MIPS_CPU_SCACHE=y
 CONFIG_MIPS_EBPF_JIT=y
+CONFIG_MIPS_EXTERNAL_TIMER=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_MIPS_LD_CAN_LINK_VDSO=y
 # CONFIG_MIPS_MT_SMP is not set
@@ -166,7 +164,7 @@ CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_PTP_1588_CLOCK_OPTIONAL=y
 CONFIG_RATIONAL=y
-# CONFIG_REALTEK_OTTO_TIMER is not set
+CONFIG_REALTEK_OTTO_TIMER=y
 CONFIG_REALTEK_OTTO_WDT=y
 CONFIG_REALTEK_PHY=y
 CONFIG_REALTEK_SOC_PHY=y
@@ -199,6 +197,8 @@ CONFIG_SYS_SUPPORTS_MIPS16=y
 CONFIG_SYS_SUPPORTS_MULTITHREADING=y
 CONFIG_TARGET_ISA_REV=2
 CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
 CONFIG_TINY_SRCU=y
 CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
 CONFIG_USE_OF=y