|
|
@@ -0,0 +1,243 @@
|
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
+
|
|
|
+#include "ar7100.dtsi"
|
|
|
+
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ compatible = "ruckus,gd11", "qca,ar7161";
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &led_power_green;
|
|
|
+ led-failsafe = &led_power_red;
|
|
|
+ led-running = &led_power_green;
|
|
|
+ led-upgrade = &led_power_red;
|
|
|
+ label-mac-device = ð0;
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
|
|
+ debounce-interval = <60>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+ dir-green {
|
|
|
+ label = "green:dir";
|
|
|
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ opt-green {
|
|
|
+ label = "green:opt";
|
|
|
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ led_power_green: power-green {
|
|
|
+ label = "green:power";
|
|
|
+ gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
|
|
|
+ default-state = "on";
|
|
|
+ };
|
|
|
+
|
|
|
+ led_power_red: power-red {
|
|
|
+ label = "red:power";
|
|
|
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
|
|
|
+ panic-indicator;
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan2g-green {
|
|
|
+ label = "green:wlan2g";
|
|
|
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
|
|
|
+ linux,default-trigger = "phy0assoc";
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan2g-yellow {
|
|
|
+ label = "yellow:wlan2g";
|
|
|
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
|
|
+ linux,default-trigger = "phy0tpt";
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan5g-green {
|
|
|
+ label = "green:wlan5g";
|
|
|
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
|
|
+ linux,default-trigger = "phy1assoc";
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan5g-yellow {
|
|
|
+ label = "yellow:wlan5g";
|
|
|
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
|
|
|
+ linux,default-trigger = "phy1tpt";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ reserved-memory {
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+ ranges;
|
|
|
+
|
|
|
+ ruckus-himem@3ff0000 {
|
|
|
+ /* Ruckus Himem area used to control
|
|
|
+ * redundant boot image selection
|
|
|
+ */
|
|
|
+ compatible = "nvmem-rmem";
|
|
|
+ reg = <0x3ff0000 0x10000>;
|
|
|
+ no-map;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ beamforming-2g-spi {
|
|
|
+ compatible = "spi-gpio";
|
|
|
+ mosi-gpios = <&ath9k0 5 GPIO_ACTIVE_HIGH>;
|
|
|
+ sck-gpios = <&ath9k0 6 GPIO_ACTIVE_HIGH>;
|
|
|
+ num-chipselects = <0>;
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+
|
|
|
+ beamforming_2g_gpio: beamforming-2g-gpio@0 {
|
|
|
+ compatible = "fairchild,74hc595";
|
|
|
+ reg = <0>;
|
|
|
+ registers-number = <1>;
|
|
|
+ spi-max-frequency = <24000000>;
|
|
|
+ gpio-controller;
|
|
|
+ #gpio-cells = <2>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ beamforming-5g-spi {
|
|
|
+ compatible = "spi-gpio";
|
|
|
+ mosi-gpios = <&ath9k1 5 GPIO_ACTIVE_HIGH>;
|
|
|
+ sck-gpios = <&ath9k1 6 GPIO_ACTIVE_HIGH>;
|
|
|
+ num-chipselects = <0>;
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+
|
|
|
+ beamforming_5g_gpio: beamforming-5g-gpio@0 {
|
|
|
+ compatible = "fairchild,74hc595";
|
|
|
+ reg = <0>;
|
|
|
+ registers-number = <1>;
|
|
|
+ spi-max-frequency = <24000000>;
|
|
|
+ gpio-controller;
|
|
|
+ #gpio-cells = <2>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&pcie0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ ath9k0: wifi@0,11 { /* 2.4 GHz */
|
|
|
+ compatible = "pci168c,0029";
|
|
|
+ reg = <0x8800 0 0 0 0>;
|
|
|
+ nvmem-cells = <&macaddr_bdata_60>;
|
|
|
+ nvmem-cell-names = "mac-address";
|
|
|
+ #gpio-cells = <2>;
|
|
|
+ gpio-controller;
|
|
|
+ };
|
|
|
+
|
|
|
+ ath9k1: wifi@0,12 { /* 5 GHz */
|
|
|
+ compatible = "pci168c,0029";
|
|
|
+ reg = <0x9000 0 0 0 0>;
|
|
|
+ nvmem-cells = <&macaddr_bdata_76>;
|
|
|
+ nvmem-cell-names = "mac-address";
|
|
|
+ #gpio-cells = <2>;
|
|
|
+ gpio-controller;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&mdio0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ phy0: ethernet-phy@1e {
|
|
|
+ reg = <0x1e>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+ð0 {
|
|
|
+ status = "okay";
|
|
|
+ nvmem-cells = <&macaddr_bdata_66>;
|
|
|
+ nvmem-cell-names = "mac-address";
|
|
|
+
|
|
|
+ pll-data = <0x00110000 0x00001099 0x00991099>;
|
|
|
+ phy-handle = <&phy0>;
|
|
|
+ phy-mode = "rgmii-id";
|
|
|
+};
|
|
|
+
|
|
|
+&spi {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ flash@0 {
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <0>;
|
|
|
+ spi-max-frequency = <104000000>;
|
|
|
+ m25p,fast-read;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ reg = <0x0 0x40000>;
|
|
|
+ label = "u-boot";
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ /* On stock FW this encompasses rcks_wlan.main,
|
|
|
+ * rcks_wlan.bkup and datafs partitions
|
|
|
+ */
|
|
|
+ partition@40000 {
|
|
|
+ compatible = "openwrt,uimage", "denx,uimage";
|
|
|
+ reg = <0x40000 0xf40000>;
|
|
|
+ label = "firmware";
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@f80000 {
|
|
|
+ compatible = "u-boot,env";
|
|
|
+ reg = <0xf80000 0x40000>;
|
|
|
+ label = "u-boot-env";
|
|
|
+ };
|
|
|
+
|
|
|
+ board_data: partition@fc0000 {
|
|
|
+ reg = <0xfc0000 0x40000>;
|
|
|
+ label = "board-data";
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&usb1 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&usb_phy {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&board_data {
|
|
|
+ compatible = "nvmem-cells";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ macaddr_bdata_60: macaddr@60 {
|
|
|
+ reg = <0x60 0x6>;
|
|
|
+ };
|
|
|
+
|
|
|
+ macaddr_bdata_66: macaddr@66 {
|
|
|
+ reg = <0x66 0x6>;
|
|
|
+ };
|
|
|
+
|
|
|
+ macaddr_bdata_76: macaddr@76 {
|
|
|
+ reg = <0x76 0x6>;
|
|
|
+ };
|
|
|
+};
|
Lech Perczak