package/mac80211: add menuconfig option for enabling debug support via debugfs

SVN-Revision: 17541

package/mac80211/Config.in

@@ -1,81 +1,10 @@
 # mac80211 configuration
 
-choice
-	prompt "b43 firmware version"
-	depends on PACKAGE_kmod-b43
-	default B43_STABLE
-	help
-	  This option allows you to select the version of the b43 firmware.
-
-config B43_STABLE
-	bool "4.150.10.5 (stable)"
-	help
-	  Stable firmware for BCM43xx devices.
-
-	  If unsure, select this.
-
-config B43_EXPERIMENTAL
-	bool "4.178.10.4 (experimental)"
-	help
-	  Experimental firmware for BCM43xx devices.
-
-	  This firmware is not tested as much as the "stable" firmware.
-
-	  If unsure, select the "stable" firmware.
-
-config B43_OPENFIRMWARE
-	bool "Open FirmWare for WiFi networks"
-	help
-	  Opensource firmware for BCM43xx devices.
-
-	  Do _not_ select this, unless you know what you are doing.
-	  The Opensource firmware is not suitable for embedded devices, yet.
-	  It does not support QoS, which is bad for AccessPoints.
-	  It does not support hardware crypto acceleration, which is a showstopper
-	  for embedded devices with low CPU resources.
-
-	  If unsure, select the "stable" firmware.
-
-endchoice
-
-config B43_FW_SQUASH
-	bool "Remove unnecessary firmware files"
-	depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE
-	help
-	  This options allows you to remove unnecessary b43 firmware files
-	  from the final rootfs image. This can reduce the rootfs size by
-	  up to 200k.
-
-	  Do _NOT_ use this option, if you don't know the core revision
-	  and/or PHY type of your wireless chip.
-
-	  If unsure, say N.
-
-config B43_FW_SQUASH_COREREVS
-	string "Core revisions to include"
-	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
-	default "5,6,7,8,9,10"
-	help
-	  This is a comma seperated list of core revision numbers.
-	  Example (keep files for rev5 only):
-	         5
-	  Example (keep files for rev5 and rev11):
-	         5,11
-
-config B43_FW_SQUASH_PHYTYPES
-	string "PHY types to include"
-	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
-	default "G,LP,N"
-	help
-	  This is a comma seperated list of PHY types:
-	  A         => A-PHY
-	  AG        => Dual A-PHY G-PHY
-	  G         => G-PHY
-	  LP        => LP-PHY
-	  N         => N-PHY
-
-	  Example (keep files for G-PHY only):
-	         G
-	  Example (keep files for G-PHY and N-PHY):
-	         G,N
-
+config PACKAGE_MAC80211_DEBUGFS
+	bool "Export mac80211 internals in DebugFS"
+	depends on PACKAGE_kmod-mac80211
+	---help---
+	  Select this to see extensive information about
+	  the internal state of mac80211 in debugfs.
+
+	  Say N unless you know you need this.

package/mac80211/Config.in.ath9k

@@ -0,0 +1,12 @@
+# mac80211 configuration
+
+config PACKAGE_ATH9K_DEBUG
+	bool "ath9k debugging"
+	depends PACKAGE_kmod-ath9k && KERNEL_DEBUG_FS
+	---help---
+	  Say Y, if you need ath9k to display debug messages.
+	  Pass the debug mask as a module parameter:
+
+	  modprobe ath9k debug=0x00002000
+
+	  Look in ath9k/core.h for possible debug masks

package/mac80211/Config.in.b43

@@ -0,0 +1,81 @@
+# B43 configuration
+
+choice
+	prompt "b43 firmware version"
+	depends on PACKAGE_kmod-b43
+	default B43_STABLE
+	help
+	  This option allows you to select the version of the b43 firmware.
+
+config B43_STABLE
+	bool "4.150.10.5 (stable)"
+	help
+	  Stable firmware for BCM43xx devices.
+
+	  If unsure, select this.
+
+config B43_EXPERIMENTAL
+	bool "4.178.10.4 (experimental)"
+	help
+	  Experimental firmware for BCM43xx devices.
+
+	  This firmware is not tested as much as the "stable" firmware.
+
+	  If unsure, select the "stable" firmware.
+
+config B43_OPENFIRMWARE
+	bool "Open FirmWare for WiFi networks"
+	help
+	  Opensource firmware for BCM43xx devices.
+
+	  Do _not_ select this, unless you know what you are doing.
+	  The Opensource firmware is not suitable for embedded devices, yet.
+	  It does not support QoS, which is bad for AccessPoints.
+	  It does not support hardware crypto acceleration, which is a showstopper
+	  for embedded devices with low CPU resources.
+
+	  If unsure, select the "stable" firmware.
+
+endchoice
+
+config B43_FW_SQUASH
+	bool "Remove unnecessary firmware files"
+	depends on PACKAGE_kmod-b43 && !B43_OPENFIRMWARE
+	help
+	  This options allows you to remove unnecessary b43 firmware files
+	  from the final rootfs image. This can reduce the rootfs size by
+	  up to 200k.
+
+	  Do _NOT_ use this option, if you don't know the core revision
+	  and/or PHY type of your wireless chip.
+
+	  If unsure, say N.
+
+config B43_FW_SQUASH_COREREVS
+	string "Core revisions to include"
+	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
+	default "5,6,7,8,9,10"
+	help
+	  This is a comma seperated list of core revision numbers.
+	  Example (keep files for rev5 only):
+	         5
+	  Example (keep files for rev5 and rev11):
+	         5,11
+
+config B43_FW_SQUASH_PHYTYPES
+	string "PHY types to include"
+	depends on PACKAGE_kmod-b43 && B43_FW_SQUASH
+	default "G,LP,N"
+	help
+	  This is a comma seperated list of PHY types:
+	  A         => A-PHY
+	  AG        => Dual A-PHY G-PHY
+	  G         => G-PHY
+	  LP        => LP-PHY
+	  N         => N-PHY
+
+	  Example (keep files for G-PHY only):
+	         G
+	  Example (keep files for G-PHY and N-PHY):
+	         G,N
+

package/mac80211/Makefile

@@ -11,7 +11,7 @@ include $(INCLUDE_DIR)/kernel.mk
 PKG_NAME:=mac80211
 
 PKG_VERSION:=2009-08-20
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 PKG_SOURCE_URL:= \
 	http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/08 \
 	http://wireless.kernel.org/download/compat-wireless-2.6
@@ -43,6 +43,10 @@ define KernelPackage/mac80211
   AUTOLOAD:=$(call AutoLoad,20,cfg80211 mac80211)
 endef
 
+define KernelPackage/mac80211/config
+	source "$(SOURCE)/Config.in"
+endef
+
 define KernelPackage/mac80211/description
 Linux 802.11 Wireless Networking Stack
 endef
@@ -298,6 +302,10 @@ This module adds support for wireless adapters based on
 Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
 endef
 
+define KernelPackage/ath9k/config
+	source "$(SOURCE)/Config.in.ath9k"
+endef
+
 define KernelPackage/mac80211-hwsim
   $(call KernelPackage/mac80211/Default)
   TITLE:=mac80211 HW simulation device
@@ -396,7 +404,7 @@ $(call KernelPackage/b43-common)
 endef
 
 define KernelPackage/b43/config
-	source "$(SOURCE)/Config.in"
+	source "$(SOURCE)/Config.in.b43"
 endef
 
 define KernelPackage/b43/description
@@ -422,7 +430,8 @@ BUILDFLAGS:= \
 	$(if $(CONFIG_PCI),-DCONFIG_SSB_SPROM) \
 	$(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_B43_LEDS -DCONFIG_B43LEGACY_LEDS) \
 	$(if $(CONFIG_HW_RANDOM),-DCONFIG_B43_HWRNG -DCONFIG_B43LEGACY_HWRNG) \
-	$(if $(CONFIG_DEBUG_FS), -DCONFIG_MAC80211_DEBUGFS) \
+	$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),-DCONFIG_MAC80211_DEBUGFS) \
+	$(if $(CONFIG_PACKAGE_ATH9K_DEBUG),-DCONFIG_ATH9K_DEBUG) \
 	-D__CONFIG_MAC80211_RC_DEFAULT=minstrel \
 
 MAKE_OPTS:= \
@@ -433,7 +442,7 @@ MAKE_OPTS:= \
 	CONFIG_MAC80211_RC_PID=y \
 	CONFIG_MAC80211_RC_MINSTREL=y \
 	CONFIG_MAC80211_LEDS=$(CONFIG_LEDS_TRIGGERS) \
-	CONFIG_MAC80211_DEBUGFS=$(CONFIG_DEBUG_FS) \
+	CONFIG_MAC80211_DEBUGFS=$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),y) \
 	CONFIG_B43_PCMCIA=n CONFIG_B43_PIO=n \
 	CONFIG_B43_PCI_AUTOSELECT=$(if $(CONFIG_PCI),y) \
 	CONFIG_B43_PCICORE_AUTOSELECT=$(if $(CONFIG_PCI),y) \
@@ -450,6 +459,7 @@ MAKE_OPTS:= \
 	CONFIG_ATH_COMMON=$(if $(CONFIG_PACKAGE_kmod-ath),m) \
 	CONFIG_ATH5K=$(if $(CONFIG_PACKAGE_kmod-ath5k),m) \
 	CONFIG_ATH9K=$(if $(CONFIG_PACKAGE_kmod-ath9k),m) \
+	CONFIG_ATH9K_DEBUG=$(if $(CONFIG_PACKAGE_ATH9K_DEBUG),y) \
 	CONFIG_ZD1211RW=$(if $(CONFIG_PACKAGE_kmod-zd1211rw),m) \
 	CONFIG_P54_COMMON=$(if $(CONFIG_PACKAGE_kmod-p54-common),m) \
 	CONFIG_P54_PCI=$(if $(CONFIG_PACKAGE_kmod-p54-pci),m) \