|
|
@@ -0,0 +1,95 @@
|
|
|
+From c830b958f52fc666919439d6f8f6caa8b6844d44 Mon Sep 17 00:00:00 2001
|
|
|
+From: INAGAKI Hiroshi <[email protected]>
|
|
|
+Date: Wed, 7 Mar 2018 20:33:56 +0900
|
|
|
+Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
|
|
|
+MIME-Version: 1.0
|
|
|
+Content-Type: text/plain; charset=UTF-8
|
|
|
+Content-Transfer-Encoding: 8bit
|
|
|
+
|
|
|
+Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
|
|
|
+dts and cannot configure these LEDs.
|
|
|
+I Added missing LED definitions for WZR-900DHP.
|
|
|
+
|
|
|
+Signed-off-by: INAGAKI Hiroshi <[email protected]>
|
|
|
+Reviewed-by: Rafał Miłecki <[email protected]>
|
|
|
+---
|
|
|
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
|
|
|
+ 1 file changed, 68 insertions(+)
|
|
|
+
|
|
|
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
|
|
|
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
|
|
|
+@@ -35,6 +35,74 @@
|
|
|
+ 0x88000000 0x08000000>;
|
|
|
+ };
|
|
|
+
|
|
|
++ spi {
|
|
|
++ compatible = "spi-gpio";
|
|
|
++ num-chipselects = <1>;
|
|
|
++ gpio-sck = <&chipcommon 7 0>;
|
|
|
++ gpio-mosi = <&chipcommon 4 0>;
|
|
|
++ cs-gpios = <&chipcommon 6 0>;
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <0>;
|
|
|
++
|
|
|
++ hc595: gpio_spi@0 {
|
|
|
++ compatible = "fairchild,74hc595";
|
|
|
++ reg = <0>;
|
|
|
++ registers-number = <1>;
|
|
|
++ spi-max-frequency = <100000>;
|
|
|
++
|
|
|
++ gpio-controller;
|
|
|
++ #gpio-cells = <2>;
|
|
|
++
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ leds {
|
|
|
++ compatible = "gpio-leds";
|
|
|
++
|
|
|
++ usb {
|
|
|
++ label = "bcm53xx:green:usb";
|
|
|
++ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
|
|
|
++ };
|
|
|
++
|
|
|
++ power0 {
|
|
|
++ label = "bcm53xx:green:power";
|
|
|
++ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
|
|
|
++ linux,default-trigger = "default-on";
|
|
|
++ };
|
|
|
++
|
|
|
++ power1 {
|
|
|
++ label = "bcm53xx:red:power";
|
|
|
++ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
|
|
|
++ };
|
|
|
++
|
|
|
++ router0 {
|
|
|
++ label = "bcm53xx:green:router";
|
|
|
++ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
|
|
|
++ linux,default-trigger = "default-on";
|
|
|
++ };
|
|
|
++
|
|
|
++ router1 {
|
|
|
++ label = "bcm53xx:amber:router";
|
|
|
++ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
|
|
|
++ };
|
|
|
++
|
|
|
++ wan {
|
|
|
++ label = "bcm53xx:green:wan";
|
|
|
++ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
|
|
|
++ linux,default-trigger = "default-on";
|
|
|
++ };
|
|
|
++
|
|
|
++ wireless0 {
|
|
|
++ label = "bcm53xx:green:wireless";
|
|
|
++ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
|
|
|
++ };
|
|
|
++
|
|
|
++ wireless1 {
|
|
|
++ label = "bcm53xx:amber:wireless";
|
|
|
++ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
+ gpio-keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+ #address-cells = <1>;
|
Rafał Miłecki