add board specific UART registration

SVN-Revision: 12654

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/cellvision.c

@@ -127,6 +127,8 @@ void __init cas7xx_flash_setup(void)
 void __init cas6xx_setup(void)
 {
 	cas6xx_flash_setup();
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
 	adm5120_add_device_switch(1, NULL);
 }
 
@@ -137,8 +139,9 @@ ADM5120_BOARD(MACH_ADM5120_CAS670, "Cellvision CAS-670/670W", cas6xx_setup);
 void __init cas7xx_setup(void)
 {
 	cas7xx_flash_setup();
-
 	cellvision_mac_setup();
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
 	adm5120_add_device_switch(1, NULL);
 }
 

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/cellvision/nfs-101.c

@@ -18,8 +18,10 @@ static u8 nfs101_vlans[6] __initdata = { /* TODO: not tested */
 static void __init nfs101_setup(void)
 {
 	cas6xx_flash_setup();
-
 	cellvision_mac_setup();
+
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
 	adm5120_add_device_switch(5, nfs101_vlans);
 }
 

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/common/board.c

@@ -66,9 +66,6 @@ static int __init adm5120_board_setup(void)
 
 	adm5120_gpio_init();
 
-	adm5120_add_device_uart(0);
-	adm5120_add_device_uart(1);
-
 	if (board->board_setup)
 		board->board_setup();
 
@@ -83,6 +80,9 @@ void __init adm5120_board_register(struct adm5120_board *board)
 
 static void __init adm5120_generic_board_setup(void)
 {
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
+
 	adm5120_add_device_flash(0);
 	adm5120_add_device_switch(6, NULL);
 }

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/compex/compex.c

@@ -55,6 +55,9 @@ void __init compex_generic_setup(void)
 	adm5120_flash0_data.switch_bank = switch_bank_gpio5;
 	adm5120_add_device_flash(0);
 
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
+
 	adm5120_add_device_gpio(COMPEX_GPIO_DEV_MASK);
 
 	compex_mac_setup();

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/edimax/br-61xx.c

@@ -76,6 +76,9 @@ void __init br61xx_generic_setup(void)
 
 	adm5120_add_device_gpio(BR61XX_GPIO_DEV_MASK);
 
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
+
 	adm5120_add_device_switch(5, br61xx_vlans);
 	adm5120_add_device_gpio_buttons(ARRAY_SIZE(br61xx_gpio_buttons),
 					br61xx_gpio_buttons);

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/infineon/infineon.c

@@ -73,6 +73,9 @@ void __init easy_setup_pqfp(void)
 	adm5120_flash0_data.parts = easy_partitions;
 #endif /* CONFIG_MTD_PARTITIONS */
 
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
+
 	adm5120_add_device_flash(0);
 
 	easy_setup_mac();
@@ -102,6 +105,9 @@ void __init easy_setup_bga(void)
 	adm5120_flash0_data.parts = easy_partitions;
 #endif /* CONFIG_MTD_PARTITIONS */
 
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
+
 	adm5120_add_device_flash(0);
 
 	easy_setup_mac();

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/mikrotik/rb-1xx.c

@@ -141,6 +141,9 @@ void __init rb1xx_generic_setup(void)
 		adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
 					rb1xx_pci_irqs);
 
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
+
 	adm5120_add_device_gpio_buttons(ARRAY_SIZE(rb1xx_gpio_buttons),
 					rb1xx_gpio_buttons);
 

target/linux/adm5120/files-2.6.26/arch/mips/adm5120/zyxel/p-33x.c

@@ -77,6 +77,9 @@ void __init p33x_generic_setup(void)
 #endif /* CONFIG_MTD_PARTITIONS */
 	adm5120_add_device_flash(0);
 
+	adm5120_add_device_uart(0);
+	adm5120_add_device_uart(1);
+
 	adm5120_add_device_gpio(P33X_GPIO_DEV_MASK);
 
 	adm5120_setup_eth_macs(bootbase_info.mac);