orion: add support for the lacie 2big network device

Signed-off-by: Felix Fietkau <[email protected]>

SVN-Revision: 37059

target/linux/orion/config-default

@@ -14,6 +14,7 @@ CONFIG_ARM_NR_BANKS=8
 CONFIG_ARM_PATCH_PHYS_VIRT=y
 # CONFIG_ARM_THUMB is not set
 # CONFIG_ARPD is not set
+CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_CLKSRC_MMIO=y
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
@@ -84,12 +85,12 @@ CONFIG_HAVE_PROC_CPU=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_SCHED_CLOCK=y
 CONFIG_HAVE_SPARSE_IRQ=y
-# CONFIG_HWMON is not set
-# CONFIG_I2C_BOARDINFO is not set
 CONFIG_INET_LRO=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_KTIME_SCALAR=y
 CONFIG_LEDS_GPIO=y
+# CONFIG_LZO_COMPRESS is not set
+# CONFIG_LZO_DECOMPRESS is not set
 # CONFIG_MACH_BIGDISK is not set
 # CONFIG_MACH_D2NET is not set
 # CONFIG_MACH_DB88F5281 is not set
@@ -135,7 +136,6 @@ CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PHYLIB=y
 CONFIG_PLAT_ORION=y
 # CONFIG_PREEMPT_RCU is not set
-# CONFIG_RTC_CLASS is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SPLIT_PTLOCK_CPUS=999999
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y

target/linux/orion/harddisk/config-default

@@ -12,6 +12,7 @@ CONFIG_HWMON=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_JBD2=y
 CONFIG_MACH_DT2=y
+CONFIG_MACH_NET2BIG=y
 CONFIG_MD=y
 CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
@@ -24,9 +25,9 @@ CONFIG_NLS=y
 CONFIG_RTC_CLASS=y
 CONFIG_SATA_MV=y
 CONFIG_SCSI=y
-CONFIG_SCSI_MOD=y
+CONFIG_SCSI_DMA=y
 CONFIG_USB=y
 CONFIG_USB_COMMON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_STORAGE=y
+# CONFIG_USB_UHCI_HCD is not set

target/linux/orion/image/harddisk.mk

@@ -18,6 +18,13 @@ define Image/BuildKernel
 	-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
 	-d $(KDIR)/dt2-zImage $(KDIR)/dt2-uImage
 	cp $(KDIR)/dt2-uImage $(BIN_DIR)/openwrt-dt2-uImage
+ # LaCie 2big Network: mach id 2342 (0x926)
+	echo -en "\x09\x1c\xa0\xe3\x26\x10\x81\xe3" > $(KDIR)/net2big-zImage
+	cat $(LINUX_DIR)/arch/arm/boot/zImage >> $(KDIR)/net2big-zImage
+	$(STAGING_DIR_HOST)/bin/mkimage -A arm -O linux -T kernel \
+	-C none -a 0x00008000 -e 0x00008000 -n 'Linux-$(LINUX_VERSION)' \
+	-d $(KDIR)/net2big-zImage $(KDIR)/net2big-uImage
+	cp $(KDIR)/net2big-uImage $(BIN_DIR)/openwrt-net2big-uImage
 endef
 
 define Image/Build/Freecom