mediatek: filogic: migrate ASUS TUF AX6000 to upstream PHY LED control

This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. There should be no functional changes.

Signed-off-by: Aleksander Jan Bajkowski <[email protected]>

target/linux/mediatek/dts/mt7986a-asus-tuf-ax6000.dts

@@ -146,16 +146,33 @@
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <5>;
 
-		mxl,led-drive-vdd;
-		mxl,led-config = <0x03f0 0x0 0x0 0x0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led-0 {
+				reg = <0>;
+				active-high;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_LAN;
+			};
+		};
 	};
 
 	phy6: phy@6 {
 		compatible = "ethernet-phy-ieee802.3-c45";
 		reg = <6>;
 
-		/* LED0: CONN (WAN white) */
-		mxl,led-config = <0x03f0 0x0 0x0 0x0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led-0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+			};
+		};
 	};
 
 	switch: switch@1f {

target/linux/mediatek/filogic/base-files/etc/board.d/01_leds

@@ -19,6 +19,10 @@ acer,predator-w6d)
 asus,tuf-ax4200)
 	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:white:wan" "eth1" "link tx rx"
 	;;
+asus,tuf-ax6000)
+	ucidef_set_led_netdev "lan5" "LAN5" "mdio-bus:05:white:lan" "lan5" "link tx rx"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:white:wan" "eth1" "link tx rx"
+	;;
 confiabits,mt7981)
 	ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" "link tx rx"
 	ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" "link tx rx"