ath79: merge glinet gl-x750 dtsi and dts

The board doesn't come in different flash type flavours, hence there is
no need to keep a dtsi + dts for this purpose.

While at it, fix some whitespace issues.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ath79/dts/qca9533_glinet_gl-x750.dts

@@ -4,7 +4,83 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca9533_glinet_x750.dtsi"
+#include "qca9533.dtsi"
+
+/ {
+	compatible = "glinet,gl-x750", "qca,qca9533";
+	model = "GL.iNet GL-X750";
+
+	keys {
+		compatible = "gpio-keys-polled";
+
+		poll-interval = <20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&jtag_disable_pins>;
+
+		button0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "gl-x750:green:power";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		wlan2g {
+			label = "gl-x750:green:wlan2g";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		wlan5g {
+			label = "gl-x750:green:wlan5g";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		wan {
+			label = "gl-x750:green:wan";
+			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		4g {
+			label = "gl-x750:green:4g";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&uart {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	hub_port: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
 
 &spi {
 	status = "okay";
@@ -31,16 +107,31 @@
 				reg = <0x040000 0x010000>;
 			};
 
-                        art: partition@50000 {
-                                label = "art";
-                                reg = <0x050000 0x010000>;
-                        };
+			art: partition@50000 {
+				label = "art";
+				reg = <0x050000 0x010000>;
+			};
 
 			partition@60000 {
 				label = "firmware";
 				reg = <0x060000 0xfa0000>;
 			};
-
 		};
 	};
 };
+
+&eth0 {
+	status = "okay";
+	mtd-mac-address = <&art 0x0>;
+	phy-handle = <&swphy4>;
+};
+
+&eth1 {
+	mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+	status = "okay";
+	mtd-cal-data = <&art 0x1000>;
+	mtd-mac-address = <&art 0x1002>;
+};

target/linux/ath79/dts/qca9533_glinet_x750.dtsi

@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include "qca9533.dtsi"
-
-/ {
-	compatible = "glinet,gl-x750", "qca,qca9533";
-	model = "GL.iNet GL-X750";
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&jtag_disable_pins>;
-
-		button0 {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "gl-x750:green:power";
-			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-
-		wlan2g {
-			label = "gl-x750:green:wlan2g";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy1tpt";
-		};
-
-		wlan5g {
-			label = "gl-x750:green:wlan5g";
-			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wan {
-			label = "gl-x750:green:wan";
-			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-		4g {
-			label = "gl-x750:green:4g";
-			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&uart {
-	status = "okay";
-};
-
-&usb0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-
-	hub_port: port@1 {
-		reg = <1>;
-		#trigger-source-cells = <0>;
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&eth0 {
-	status = "okay";
-	mtd-mac-address = <&art 0x0>;
-	phy-handle = <&swphy4>;
-};
-
-&eth1 {
-	mtd-mac-address = <&art 0x6>;
-};
-
-&wmac {
-	status = "okay";
-	mtd-cal-data = <&art 0x1000>;
-	mtd-mac-address = <&art 0x1002>;
-};