brcm63xx: 4.1: switch to upstream UHI interface

Replace the appended dtb patch with the upstream accepted version and
update the code to work with the changed interface.

Signed-off-by: Jonas Gorski <[email protected]>

SVN-Revision: 46181

target/linux/brcm63xx/config-4.1

@@ -144,11 +144,12 @@ CONFIG_LIBFDT=y
 # CONFIG_LZ4_DECOMPRESS is not set
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MIPS=y
-CONFIG_MIPS_APPENDED_DTB=y
 # CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=4
 CONFIG_MIPS_L1_CACHE_SHIFT_4=y
 # CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_NO_APPENDED_DTB is not set
+CONFIG_MIPS_RAW_APPENDED_DTB=y
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y

target/linux/brcm63xx/patches-4.1/001-4.2-MIPS-Add-support-for-vmlinux.bin-appended-dtb.patch

@@ -0,0 +1,112 @@
+From 1da8f1798e307fb8422753984339beb00025f97d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <[email protected]>
+Date: Sun, 12 Apr 2015 12:24:58 +0200
+Subject: [PATCH] MIPS: Add support for vmlinux.bin appended dtb
+
+Add support for detecting a vmlinux.bin appended dtb and overriding
+the boot arguments to match the UHI interface.
+
+Due to the PERCPU section being empty for !SMP, but still modifying
+the current address by aligning it to the page size, do not define
+it for !SMP builds to allow __appended_dtb to still point to
+the actual end of the data.
+
+Signed-off-by: Jonas Gorski <[email protected]>
+Cc: [email protected]
+Cc: [email protected]
+Cc: John Crispin <[email protected]>
+Cc: Kevin Cernekee <[email protected]>
+Cc: Florian Fainelli <[email protected]>
+Cc: Aaro Koskinen <[email protected]>
+Cc: Markos Chandras <[email protected]>
+Cc: Andrew Bresticker <[email protected]>
+Cc: Daniel Schwierzeck <[email protected]>
+Cc: Paul Burton <[email protected]>
+Cc: James Hartley <[email protected]>
+Patchwork: https://patchwork.linux-mips.org/patch/9739/
+Signed-off-by: Ralf Baechle <[email protected]>
+---
+ arch/mips/Kconfig              | 27 +++++++++++++++++++++++++++
+ arch/mips/kernel/head.S        | 16 ++++++++++++++++
+ arch/mips/kernel/vmlinux.lds.S |  8 +++++++-
+ 3 files changed, 50 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -2702,6 +2702,33 @@ config BOOT_RAW
+ 
+ 
+ 
++choice
++	prompt "Kernel appended dtb support" if OF
++	default MIPS_NO_APPENDED_DTB
++
++	config MIPS_NO_APPENDED_DTB
++		bool "None"
++		help
++		  Do not enable appended dtb support.
++
++	config MIPS_RAW_APPENDED_DTB
++		bool "vmlinux.bin"
++		help
++		  With this option, the boot code will look for a device tree binary
++		  DTB) appended to raw vmlinux.bin (without decompressor).
++		  (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
++
++		  This is meant as a backward compatibility convenience for those
++		  systems with a bootloader that can't be upgraded to accommodate
++		  the documented boot protocol using a device tree.
++
++		  Beware that there is very little in terms of protection against
++		  this option being confused by leftover garbage in memory that might
++		  look like a DTB header after a reboot if no actual DTB is appended
++		  to vmlinux.bin.  Do not leave this option active in a production kernel
++		  if you don't intend to always append a DTB.
++endchoice
++
+ endmenu
+ 
+ config LOCKDEP_SUPPORT
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -100,6 +100,22 @@ NESTED(kernel_entry, 16, sp)			# kernel
+ 	jr	t0
+ 0:
+ 
++#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
++	PTR_LA		t0, __appended_dtb
++
++#ifdef CONFIG_CPU_BIG_ENDIAN
++	li		t1, 0xd00dfeed
++#else
++	li		t1, 0xedfe0dd0
++#endif
++	lw		t2, (t0)
++	bne		t1, t2, not_found
++	 nop
++
++	move		a1, t0
++	PTR_LI		a0, -2
++not_found:
++#endif
+ 	PTR_LA		t0, __bss_start		# clear .bss
+ 	LONG_S		zero, (t0)
+ 	PTR_LA		t1, __bss_stop - LONGSIZE
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -125,8 +125,14 @@ SECTIONS
+ 	.exit.data : {
+ 		EXIT_DATA
+ 	}
+-
++#ifdef CONFIG_SMP
+ 	PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
++#endif
++#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
++	__appended_dtb = .;
++	/* leave space for appended DTB */
++	. += 0x100000;
++#endif
+ 	/*
+ 	 * Align to 64K in attempt to eliminate holes before the
+ 	 * .bss..swapper_pg_dir section at the start of .bss.  This

target/linux/brcm63xx/patches-4.1/366-MIPS-add-support-for-vmlinux.bin-appended-DTB.patch

@@ -1,124 +0,0 @@
-From 318c1fce4aeef298cbb6153416c499c94ad7cda0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <[email protected]>
-Date: Tue, 24 Jun 2014 10:53:15 +0200
-Subject: [PATCH RFC v3] MIPS: add support for vmlinux.bin appended DTB
-
-Add support for populating initial_boot_params through a dtb
-blob appended to raw vmlinux.bin.
-
-Signed-off-by: Jonas Gorski <[email protected]>
----
-Changes RFC v2 -> v3
-
-* fixed !smp kernels (TODO: move it to its own patch
-
-Changes RFC v1 -> v2
-
-* changed all occurences of vmlinux to vmlinux.bin
-* clarified this applies to the raw vmlinux.bin without decompressor
-* s/initial_device_params/initial_boot_params/
-
-Initial comments by me still valid:
-
-Mostly adapted from how ARM is doing it.
-
-Sent as an RFC PATCH because I am not sure if this is the right way to
-it, and whether storing the pointer in initial_boot_params is a good
-idea, or a new variable should be introduced.
-
-The reasoning for initial_boot_params is that there is no common
-MIPS interface yet, so the next best thing was using that. This also
-has the advantage of keeping the original fw_args intact.
-
-This patch works for me on bcm63xx, where the bootloader expects
-an lzma compressed kernel, so I didn't want to double compress using
-the in-kernel compressed kernel support.
-
-Completely untested on anything except MIPS32 / big endian.
-
- arch/mips/Kconfig              | 18 ++++++++++++++++++
- arch/mips/kernel/head.S        | 19 +++++++++++++++++++
- arch/mips/kernel/vmlinux.lds.S |  7 +++++++
- 3 files changed, 43 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2831,6 +2831,24 @@ config RAPIDIO
- 
- source "drivers/rapidio/Kconfig"
- 
-+config MIPS_APPENDED_DTB
-+	bool "Use appended device tree blob to vmlinux.bin (EXPERIMENTAL)"
-+	depends on OF
-+	help
-+	  With this option, the boot code will look for a device tree binary
-+	  DTB) appended to raw vmlinux.bin (without decompressor).
-+	  (e.g. cat vmlinux.bin <filename>.dtb > vmlinux_w_dtb).
-+
-+	  This is meant as a backward compatibility convenience for those
-+	  systems with a bootloader that can't be upgraded to accommodate
-+	  the documented boot protocol using a device tree.
-+
-+	  Beware that there is very little in terms of protection against
-+	  this option being confused by leftover garbage in memory that might
-+	  look like a DTB header after a reboot if no actual DTB is appended
-+	  to vmlinux.bin.  Do not leave this option active in a production kernel
-+	  if you don't intend to always append a DTB.
-+
- endmenu
- 
- menu "Executable file formats"
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -100,6 +100,22 @@ NESTED(kernel_entry, 16, sp)			# kernel
- 	jr	t0
- 0:
- 
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+	PTR_LA		t0, __appended_dtb
-+	PTR_LI		t3, 0
-+
-+#ifdef CONFIG_CPU_BIG_ENDIAN
-+	PTR_LI		t1, 0xd00dfeed
-+#else
-+	PTR_LI		t1, 0xedfe0dd0
-+#endif
-+	LONG_L		t2, (t0)
-+	bne		t1, t2, not_found
-+
-+	PTR_LA		t3, __appended_dtb
-+
-+not_found:
-+#endif
- 	PTR_LA		t0, __bss_start		# clear .bss
- 	LONG_S		zero, (t0)
- 	PTR_LA		t1, __bss_stop - LONGSIZE
-@@ -113,6 +129,10 @@ NESTED(kernel_entry, 16, sp)			# kernel
- 	LONG_S		a2, fw_arg2
- 	LONG_S		a3, fw_arg3
- 
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+	LONG_S		t3, initial_boot_params
-+#endif
-+
- 	MTC0		zero, CP0_CONTEXT	# clear context register
- 	PTR_LA		$28, init_thread_union
- 	/* Set the SP after an empty pt_regs.  */
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -125,8 +125,14 @@ SECTIONS
- 	.exit.data : {
- 		EXIT_DATA
- 	}
--
-+#ifdef CONFIG_SMP
- 	PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
-+#endif
-+#ifdef CONFIG_MIPS_APPENDED_DTB
-+	__appended_dtb = .;
-+	/* leave space for appended DTB */
-+	. = . + 0x100000;
-+#endif
- 	/*
- 	 * Align to 64K in attempt to eliminate holes before the
- 	 * .bss..swapper_pg_dir section at the start of .bss.  This

target/linux/brcm63xx/patches-4.1/367-MIPS-BCM63XX-add-support-for-loading-DTB.patch

@@ -1,12 +1,14 @@
-From db896341299cbcb703821228574ba9b79b6a3565 Mon Sep 17 00:00:00 2001
+From 26546e5499d98616322fb3472b977e2e86603f3a Mon Sep 17 00:00:00 2001
 From: Jonas Gorski <[email protected]>
 Date: Tue, 24 Jun 2014 10:57:51 +0200
 Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
 
+Signed-off-by: Jonas Gorski <[email protected]>
 ---
- arch/mips/bcm63xx/boards/Kconfig        |  4 ++++
- arch/mips/bcm63xx/boards/board_common.c | 34 +++++++++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
+ arch/mips/bcm63xx/boards/Kconfig        |    4 ++++
+ arch/mips/bcm63xx/boards/board_common.c |   34 +++++++++++++++++++++++++++++++
+ arch/mips/bcm63xx/prom.c                |    6 ++++++
+ 3 files changed, 44 insertions(+)
 
 --- a/arch/mips/bcm63xx/boards/Kconfig
 +++ b/arch/mips/bcm63xx/boards/Kconfig
@@ -94,3 +96,25 @@ Subject: [PATCH 45/48] MIPS: BCM63XX: add support for loading DTB
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
  
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -8,6 +8,7 @@
+ 
+ #include <linux/init.h>
+ #include <linux/bootmem.h>
++#include <linux/of_fdt.h>
+ #include <linux/smp.h>
+ #include <asm/bootinfo.h>
+ #include <asm/bmips.h>
+@@ -23,6 +24,11 @@ void __init prom_init(void)
+ {
+ 	u32 reg, mask;
+ 
++#if CONFIG_OF
++	if (fw_arg0 == -2)
++		early_init_dt_verify((void *)fw_arg1);
++#endif
++
+ 	bcm63xx_cpu_init();
+ 
+ 	/* stop any running watchdog */