arm-trusted-firmware-mvebu: update to v2.7

Remove the backported patches and add another to allow building with the
OpenWrt build system.

Signed-off-by: Andre Heider <[email protected]>

package/boot/arm-trusted-firmware-mvebu/Makefile

@@ -7,9 +7,9 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_VERSION:=2.5
+PKG_VERSION:=2.7
 PKG_RELEASE:=$(AUTORELEASE)
-PKG_HASH:=ad8a2ffcbcd12d919723da07630fc0840c3c2fba7656d1462e45488e42995d7c
+PKG_HASH:=53422dc649153838e03820330ba17cb10afe3e330ecde0db11e4d5f1361a33e6
 
 PKG_MAINTAINER:=Vladimir Vid <[email protected]>
 
@@ -209,10 +209,8 @@ define Build/Prepare
 	mkdir -p $(STAGING_DIR_IMAGE)
 	$(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(CRYPTOPP_SOURCE)
 	$(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(A3700_UTILS_SOURCE)
-	echo "master" > $(STAGING_DIR_IMAGE)/$(A3700_UTILS_NAME)/branch.txt
 	$(call PatchDir/Default,$(STAGING_DIR_IMAGE)/$(A3700_UTILS_NAME),./patches-a3700-utils)
 	$(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(MV_DDR_SOURCE)
-	echo "master" > $(STAGING_DIR_IMAGE)/$(MV_DDR_NAME)/branch.txt
 	$(call PatchDir/Default,$(STAGING_DIR_IMAGE)/$(MV_DDR_NAME),./patches-mv-ddr-marvell)
 	$(TAR) -C $(STAGING_DIR_IMAGE) -xf $(DL_DIR)/$(MOX_BB_SOURCE)
 	$(call PatchDir/Default,$(STAGING_DIR_IMAGE)/$(MOX_BB_NAME)-$(MOX_BB_RELEASE),./patches-mox-boot-builder)

package/boot/arm-trusted-firmware-mvebu/patches/001-no-git.patch

@@ -0,0 +1,21 @@
+We're not building with full fledged git checkouts here, get rid of the
+overzealous checks.
+
+--- a/plat/marvell/armada/a3k/common/a3700_common.mk
++++ b/plat/marvell/armada/a3k/common/a3700_common.mk
+@@ -78,7 +78,6 @@ ifdef WTP
+ 
+ # Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds
+ $(if $(wildcard $(value WTP)/*),,$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' directory does not exist"))
+-$(if $(shell git -C $(value WTP) rev-parse --show-cdup 2>&1),$(error "'WTP=$(value WTP)' was specified, but '$(value WTP)' does not contain valid A3700-utils-marvell git repository"))
+ 
+ TBB		:= $(WTP)/wtptp/src/TBB_Linux/release/TBB_linux
+ 
+@@ -164,7 +163,6 @@ $(TIMDDRTOOL): FORCE
+ #	Do not remove! Following checks are required to ensure correct TF-A builds, removing these checks leads to broken TF-A builds
+ 	$(if $(value MV_DDR_PATH),,$(error "Platform '${PLAT}' for ddr tool requires MV_DDR_PATH. Please set MV_DDR_PATH to point to the right directory"))
+ 	$(if $(wildcard $(value MV_DDR_PATH)/*),,$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' directory does not exist"))
+-	$(if $(shell git -C $(value MV_DDR_PATH) rev-parse --show-cdup 2>&1),$(error "'MV_DDR_PATH=$(value MV_DDR_PATH)' was specified, but '$(value MV_DDR_PATH)' does not contain valid mv-ddr-marvell git repository"))
+ 	$(Q)$(MAKE) --no-print-directory -C $(WTP) MV_DDR_PATH=$(MV_DDR_PATH) DDR_TOPOLOGY=$(DDR_TOPOLOGY) mv_ddr
+ 
+ $(BUILD_PLAT)/$(UART_IMAGE): $(BUILD_PLAT)/$(BOOT_IMAGE) $(BUILD_PLAT)/wtmi.bin $(TBB) $(TIMBUILD) $(TIMDDRTOOL)

package/boot/arm-trusted-firmware-mvebu/patches/100-fix-plat-marvell-a3720-uart-fix-UART-clock-rate-valu.patch

@@ -1,60 +0,0 @@
-From 66a7752834382595d26214783ae4698fd1f00bd6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <[email protected]>
-Date: Thu, 13 May 2021 14:53:44 +0200
-Subject: [PATCH] fix(plat/marvell/a3720/uart): fix UART clock rate value and
- divisor calculation
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-UART parent clock is by default the platform's xtal clock, which is
-25 MHz.
-
-The value defined in the driver, though, is 25.8048 MHz. This is a hack
-for the suboptimal divisor calculation
-  Divisor = UART clock / (16 * baudrate)
-which does not use rounding division, resulting in a suboptimal value
-for divisor if the correct parent clock rate was used.
-
-Change the code for divisor calculation to
-  Divisor = Round(UART clock / (16 * baudrate))
-and change the parent clock rate value to 25 MHz.
-
-The final UART divisor for default baudrate 115200 is not affected by
-this change.
-
-(Note that the parent clock rate should not be defined via a macro,
-since the xtal clock can also be 40 MHz. This is outside of the scope of
-this fix, though.)
-
-Signed-off-by: Pali Rohár <[email protected]>
-Change-Id: Iaa401173df87aec94f2dd1b38a90fb6ed0bf0ec6
----
- drivers/marvell/uart/a3700_console.S                  | 3 ++-
- plat/marvell/armada/a3k/common/include/platform_def.h | 2 +-
- 2 files changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/marvell/uart/a3700_console.S
-+++ b/drivers/marvell/uart/a3700_console.S
-@@ -45,8 +45,9 @@ func console_a3700_core_init
- 	cbz	w2, init_fail
- 
- 	/* Program the baudrate */
--	/* Divisor =  Uart clock / (16 * baudrate) */
-+	/* Divisor = Round(Uartclock / (16 * baudrate)) */
- 	lsl	w2, w2, #4
-+	add	w1, w1, w2, lsr #1
- 	udiv	w2, w1, w2
- 	and	w2, w2, #0x3ff
- 
---- a/plat/marvell/armada/a3k/common/include/platform_def.h
-+++ b/plat/marvell/armada/a3k/common/include/platform_def.h
-@@ -164,7 +164,7 @@
-  * PL011 related constants
-  */
- #define PLAT_MARVELL_BOOT_UART_BASE		(MVEBU_REGS_BASE + 0x12000)
--#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ	25804800
-+#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ	25000000
- 
- #define PLAT_MARVELL_CRASH_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
- #define PLAT_MARVELL_CRASH_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ

package/boot/arm-trusted-firmware-mvebu/patches/101-fix-plat-marvell-a3720-uart-fix-configuring-UART-clo.patch

@@ -1,53 +0,0 @@
-From b9185c75f7ec2b600ebe0d49281e216a2456b764 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <[email protected]>
-Date: Thu, 13 May 2021 15:11:06 +0200
-Subject: [PATCH] fix(plat/marvell/a3720/uart): fix configuring UART clock
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When configuring the UART_BAUD_REG register, the function
-console_a3700_core_init() currently only changes the baud divisor field,
-leaving other fields to their previous value.
-
-This is incorrect, because the baud divisor is computed with the
-assumption that the parent clock rate is 25 MHz, and since the other
-fields in this register configure the parent clock, which could have
-been changed by U-Boot or Linux.
-
-Fix this function to also configure the other fields so that the UART
-parent clock is selected to be the xtal clock.
-
-For example without this change TF-A prints only
-
-    ERROR: a3700_system_off needs to be implemented
-
-followed by garbage after plat_crash_console_init() is called.
-
-After applying this change instead of garbage it also print crash info:
-
-    PANIC at PC : 0x0000000004023800
-
-Signed-off-by: Pali Rohár <[email protected]>
-Change-Id: I72f338355cc60d939b8bb978d9c7fdd576416b81
----
- drivers/marvell/uart/a3700_console.S | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/marvell/uart/a3700_console.S
-+++ b/drivers/marvell/uart/a3700_console.S
-@@ -49,12 +49,9 @@ func console_a3700_core_init
- 	lsl	w2, w2, #4
- 	add	w1, w1, w2, lsr #1
- 	udiv	w2, w1, w2
--	and	w2, w2, #0x3ff
-+	and	w2, w2, #0x3ff /* clear all other bits to use default clock */
- 
--	ldr	w3, [x0, #UART_BAUD_REG]
--	bic	w3, w3, 0x3ff
--	orr	w3, w3, w2
--	str	w3, [x0, #UART_BAUD_REG]/* set baud rate divisor */
-+	str	w2, [x0, #UART_BAUD_REG]/* set baud rate divisor */
- 
- 	/* Set UART to default 16X scheme */
- 	mov	w3, #0

package/boot/arm-trusted-firmware-mvebu/patches/102-refactor-plat-marvell-uart-de-duplicate-PLAT_MARVELL.patch

@@ -1,122 +0,0 @@
-From 3133625859b74df42deddd80b705578af6fc2fea Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <[email protected]>
-Date: Fri, 14 May 2021 13:21:56 +0200
-Subject: [PATCH] refactor(plat/marvell/uart): de-duplicate PLAT_MARVELL_UART
- macros
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Macros PLAT_MARVELL_BOOT_UART* and PLAT_MARVELL_CRASH_UART* are defined
-to same values. De-duplicate them into PLAT_MARVELL_UART* macros.
-
-Signed-off-by: Pali Rohár <[email protected]>
-Change-Id: Iae5daf7cad6a971e6f3dbe561df3d0174106ca7f
----
- plat/marvell/armada/a3k/common/include/platform_def.h     | 7 ++-----
- plat/marvell/armada/a8k/a80x0_puzzle/board/system_power.c | 4 ++--
- plat/marvell/armada/a8k/common/include/platform_def.h     | 7 ++-----
- plat/marvell/armada/common/aarch64/marvell_helpers.S      | 8 ++++----
- plat/marvell/armada/common/marvell_console.c              | 8 ++++----
- 5 files changed, 14 insertions(+), 20 deletions(-)
-
---- a/plat/marvell/armada/a3k/common/include/platform_def.h
-+++ b/plat/marvell/armada/a3k/common/include/platform_def.h
-@@ -163,11 +163,8 @@
- /*
-  * PL011 related constants
-  */
--#define PLAT_MARVELL_BOOT_UART_BASE		(MVEBU_REGS_BASE + 0x12000)
--#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ	25000000
--
--#define PLAT_MARVELL_CRASH_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
--#define PLAT_MARVELL_CRASH_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
-+#define PLAT_MARVELL_UART_BASE			(MVEBU_REGS_BASE + 0x12000)
-+#define PLAT_MARVELL_UART_CLK_IN_HZ		25000000
- 
- #define PLAT_MARVELL_BL31_RUN_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
- #define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
---- a/plat/marvell/armada/a8k/a80x0_puzzle/board/system_power.c
-+++ b/plat/marvell/armada/a8k/a80x0_puzzle/board/system_power.c
-@@ -41,8 +41,8 @@ int system_power_off(void)
- 	len = sizeof(system_off_now);
- 	system_off_now[len - 1] = add_xor_checksum(system_off_now, len);
- 
--	console_16550_register(PLAT_MARVELL_BOOT_UART_BASE + 0x100,
--		PLAT_MARVELL_BOOT_UART_CLK_IN_HZ, 115200, &console);
-+	console_16550_register(PLAT_MARVELL_UART_BASE + 0x100,
-+		PLAT_MARVELL_UART_CLK_IN_HZ, 115200, &console);
- 
- 	/* Send system_off_now to console */
- 	for (i = 0; i < len; i++) {
---- a/plat/marvell/armada/a8k/common/include/platform_def.h
-+++ b/plat/marvell/armada/a8k/common/include/platform_def.h
-@@ -168,11 +168,8 @@
- /*
-  * PL011 related constants
-  */
--#define PLAT_MARVELL_BOOT_UART_BASE		(MVEBU_REGS_BASE + 0x512000)
--#define PLAT_MARVELL_BOOT_UART_CLK_IN_HZ	200000000
--
--#define PLAT_MARVELL_CRASH_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
--#define PLAT_MARVELL_CRASH_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
-+#define PLAT_MARVELL_UART_BASE			(MVEBU_REGS_BASE + 0x512000)
-+#define PLAT_MARVELL_UART_CLK_IN_HZ		200000000
- 
- #define PLAT_MARVELL_BL31_RUN_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
- #define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
---- a/plat/marvell/armada/common/aarch64/marvell_helpers.S
-+++ b/plat/marvell/armada/common/aarch64/marvell_helpers.S
-@@ -63,8 +63,8 @@ endfunc plat_marvell_calc_core_pos
- 	 * ---------------------------------------------
- 	 */
- func plat_crash_console_init
--	mov_imm	x0, PLAT_MARVELL_CRASH_UART_BASE
--	mov_imm	x1, PLAT_MARVELL_CRASH_UART_CLK_IN_HZ
-+	mov_imm	x0, PLAT_MARVELL_UART_BASE
-+	mov_imm	x1, PLAT_MARVELL_UART_CLK_IN_HZ
- 	mov_imm	x2, MARVELL_CONSOLE_BAUDRATE
- #ifdef PLAT_a3700
- 	b	console_a3700_core_init
-@@ -81,7 +81,7 @@ endfunc plat_crash_console_init
- 	 * ---------------------------------------------
- 	 */
- func plat_crash_console_putc
--	mov_imm	x1, PLAT_MARVELL_CRASH_UART_BASE
-+	mov_imm	x1, PLAT_MARVELL_UART_BASE
- #ifdef PLAT_a3700
- 
- 	b	console_a3700_core_putc
-@@ -99,7 +99,7 @@ endfunc plat_crash_console_putc
- 	 * ---------------------------------------------
- 	 */
- func plat_crash_console_flush
--	mov_imm	x0, PLAT_MARVELL_CRASH_UART_BASE
-+	mov_imm	x0, PLAT_MARVELL_UART_BASE
- #ifdef PLAT_a3700
- 	b	console_a3700_core_flush
- #else
---- a/plat/marvell/armada/common/marvell_console.c
-+++ b/plat/marvell/armada/common/marvell_console.c
-@@ -31,8 +31,8 @@ static console_t marvell_runtime_console
- void marvell_console_boot_init(void)
- {
- 	int rc =
--	console_marvell_register(PLAT_MARVELL_BOOT_UART_BASE,
--				 PLAT_MARVELL_BOOT_UART_CLK_IN_HZ,
-+	console_marvell_register(PLAT_MARVELL_UART_BASE,
-+				 PLAT_MARVELL_UART_CLK_IN_HZ,
- 				 MARVELL_CONSOLE_BAUDRATE,
- 				 &marvell_boot_console);
- 	if (rc == 0) {
-@@ -58,8 +58,8 @@ void marvell_console_boot_end(void)
- void marvell_console_runtime_init(void)
- {
- 	int rc =
--	console_marvell_register(PLAT_MARVELL_BOOT_UART_BASE,
--				 PLAT_MARVELL_BOOT_UART_CLK_IN_HZ,
-+	console_marvell_register(PLAT_MARVELL_UART_BASE,
-+				 PLAT_MARVELL_UART_CLK_IN_HZ,
- 				 MARVELL_CONSOLE_BAUDRATE,
- 				 &marvell_runtime_console);
- 	if (rc == 0)

package/boot/arm-trusted-firmware-mvebu/patches/103-fix-plat-marvell-a3720-uart-fix-UART-parent-clock-ra.patch

@@ -1,177 +0,0 @@
-From 5a91c439cbeb1f64b8b9830de91efad5113d3c89 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <[email protected]>
-Date: Fri, 14 May 2021 15:52:11 +0200
-Subject: [PATCH] fix(plat/marvell/a3720/uart): fix UART parent clock rate
- determination
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The UART code for the A3K platform assumes that UART parent clock rate
-is always 25 MHz. This is incorrect, because the xtal clock can also run
-at 40 MHz (this is board specific).
-
-The frequency of the xtal clock is determined by a value on a strapping
-pin during SOC reset. The code to determine this frequency is already in
-A3K's comphy driver.
-
-Move the get_ref_clk() function from the comphy driver to a separate
-file and use it for UART parent clock rate determination.
-
-Signed-off-by: Pali Rohár <[email protected]>
-Change-Id: I8bb18a2d020ef18fe65aa06ffa4ab205c71be92e
----
- drivers/marvell/comphy/phy-comphy-3700.c      | 24 +------------
- .../marvell/armada/a3k/common/plat_marvell.h  |  2 ++
- .../marvell/armada/a3k/common/a3700_common.mk |  1 +
- .../armada/a3k/common/aarch64/a3700_clock.S   | 35 +++++++++++++++++++
- .../armada/a3k/common/include/platform_def.h  |  1 -
- .../armada/common/aarch64/marvell_helpers.S   | 10 +++++-
- plat/marvell/armada/common/marvell_console.c  |  1 +
- 7 files changed, 49 insertions(+), 25 deletions(-)
- create mode 100644 plat/marvell/armada/a3k/common/aarch64/a3700_clock.S
-
---- a/drivers/marvell/comphy/phy-comphy-3700.c
-+++ b/drivers/marvell/comphy/phy-comphy-3700.c
-@@ -14,6 +14,7 @@
- 
- #include <mvebu.h>
- #include <mvebu_def.h>
-+#include <plat_marvell.h>
- 
- #include "phy-comphy-3700.h"
- #include "phy-comphy-common.h"
-@@ -29,15 +30,6 @@
- #define USB3_GBE1_PHY		(MVEBU_REGS_BASE + 0x5C000)
- #define COMPHY_SD_ADDR		(MVEBU_REGS_BASE + 0x1F000)
- 
--/*
-- * Below address in used only for reading, therefore no problem with concurrent
-- * Linux access.
-- */
--#define MVEBU_TEST_PIN_LATCH_N (MVEBU_NB_GPIO_REG_BASE + 0x8)
-- #define MVEBU_XTAL_MODE_MASK		BIT(9)
-- #define MVEBU_XTAL_MODE_OFFS		9
-- #define MVEBU_XTAL_CLOCK_25MHZ		0x0
--
- struct sgmii_phy_init_data_fix {
- 	uint16_t addr;
- 	uint16_t value;
-@@ -125,20 +117,6 @@ static uint16_t sgmii_phy_init[512] = {
- 	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000	/*1F8 */
- };
- 
--/* returns reference clock in MHz (25 or 40) */
--static uint32_t get_ref_clk(void)
--{
--	uint32_t val;
--
--	val = (mmio_read_32(MVEBU_TEST_PIN_LATCH_N) & MVEBU_XTAL_MODE_MASK) >>
--		MVEBU_XTAL_MODE_OFFS;
--
--	if (val == MVEBU_XTAL_CLOCK_25MHZ)
--		return 25;
--	else
--		return 40;
--}
--
- /* PHY selector configures with corresponding modes */
- static void mvebu_a3700_comphy_set_phy_selector(uint8_t comphy_index,
- 						uint32_t comphy_mode)
---- a/include/plat/marvell/armada/a3k/common/plat_marvell.h
-+++ b/include/plat/marvell/armada/a3k/common/plat_marvell.h
-@@ -100,4 +100,6 @@ void plat_marvell_interconnect_enter_coh
- 
- const mmap_region_t *plat_marvell_get_mmap(void);
- 
-+uint32_t get_ref_clk(void);
-+
- #endif /* PLAT_MARVELL_H */
---- a/plat/marvell/armada/a3k/common/a3700_common.mk
-+++ b/plat/marvell/armada/a3k/common/a3700_common.mk
-@@ -38,6 +38,7 @@ PLAT_INCLUDES		:=	-I$(PLAT_FAMILY_BASE)/
- 				-I$/drivers/arm/gic/common/
- 
- PLAT_BL_COMMON_SOURCES	:=	$(PLAT_COMMON_BASE)/aarch64/a3700_common.c \
-+				$(PLAT_COMMON_BASE)/aarch64/a3700_clock.S \
- 				$(MARVELL_DRV_BASE)/uart/a3700_console.S
- 
- BL1_SOURCES		+=	$(PLAT_COMMON_BASE)/aarch64/plat_helpers.S \
---- /dev/null
-+++ b/plat/marvell/armada/a3k/common/aarch64/a3700_clock.S
-@@ -0,0 +1,35 @@
-+/*
-+ * Copyright (C) 2018 Marvell International Ltd.
-+ *
-+ * SPDX-License-Identifier:	BSD-3-Clause
-+ * https://spdx.org/licenses
-+ */
-+
-+#include <asm_macros.S>
-+#include <platform_def.h>
-+
-+/*
-+ * Below address in used only for reading, therefore no problem with concurrent
-+ * Linux access.
-+ */
-+#define MVEBU_TEST_PIN_LATCH_N (MVEBU_NB_GPIO_REG_BASE + 0x8)
-+ #define MVEBU_XTAL_MODE_MASK		BIT(9)
-+
-+	/* -----------------------------------------------------
-+	 * uint32_t get_ref_clk (void);
-+	 *
-+	 * returns reference clock in MHz (25 or 40)
-+	 * -----------------------------------------------------
-+	 */
-+.globl	get_ref_clk
-+func get_ref_clk
-+	mov_imm	x0, MVEBU_TEST_PIN_LATCH_N
-+	ldr	w0, [x0]
-+	tst	w0, #MVEBU_XTAL_MODE_MASK
-+	bne	40
-+	mov	w0, #25
-+	ret
-+40:
-+	mov	w0, #40
-+	ret
-+endfunc get_ref_clk
---- a/plat/marvell/armada/a3k/common/include/platform_def.h
-+++ b/plat/marvell/armada/a3k/common/include/platform_def.h
-@@ -164,7 +164,6 @@
-  * PL011 related constants
-  */
- #define PLAT_MARVELL_UART_BASE			(MVEBU_REGS_BASE + 0x12000)
--#define PLAT_MARVELL_UART_CLK_IN_HZ		25000000
- 
- #define PLAT_MARVELL_BL31_RUN_UART_BASE		PLAT_MARVELL_BOOT_UART_BASE
- #define PLAT_MARVELL_BL31_RUN_UART_CLK_IN_HZ	PLAT_MARVELL_BOOT_UART_CLK_IN_HZ
---- a/plat/marvell/armada/common/aarch64/marvell_helpers.S
-+++ b/plat/marvell/armada/common/aarch64/marvell_helpers.S
-@@ -63,8 +63,16 @@ endfunc plat_marvell_calc_core_pos
- 	 * ---------------------------------------------
- 	 */
- func plat_crash_console_init
--	mov_imm	x0, PLAT_MARVELL_UART_BASE
-+#ifdef PLAT_a3700
-+	mov	x1, x30
-+	bl	get_ref_clk
-+	mov	x30, x1
-+	mov_imm	x1, 1000000
-+	mul	x1, x0, x1
-+#else
- 	mov_imm	x1, PLAT_MARVELL_UART_CLK_IN_HZ
-+#endif
-+	mov_imm	x0, PLAT_MARVELL_UART_BASE
- 	mov_imm	x2, MARVELL_CONSOLE_BAUDRATE
- #ifdef PLAT_a3700
- 	b	console_a3700_core_init
---- a/plat/marvell/armada/common/marvell_console.c
-+++ b/plat/marvell/armada/common/marvell_console.c
-@@ -14,6 +14,7 @@
- 
- #ifdef PLAT_a3700
- #include <drivers/marvell/uart/a3700_console.h>
-+#define PLAT_MARVELL_UART_CLK_IN_HZ (get_ref_clk() * 1000000)
- #define console_marvell_register console_a3700_register
- #else
- #include <drivers/ti/uart/uart_16550.h>

package/boot/arm-trusted-firmware-mvebu/patches/200-hostssl.patch

@@ -1,20 +0,0 @@
---- a/tools/fiptool/Makefile
-+++ b/tools/fiptool/Makefile
-@@ -20,7 +20,7 @@ ifeq (${DEBUG},1)
- else
-   HOSTCCFLAGS += -O2
- endif
--LDLIBS := -lcrypto
-+LDLIBS := -L${OPENSSL_DIR}/lib -lcrypto
- 
- ifeq (${V},0)
-   Q := @
-@@ -28,7 +28,7 @@ else
-   Q :=
- endif
- 
--INCLUDE_PATHS := -I../../include/tools_share
-+INCLUDE_PATHS := -I../../include/tools_share -I${OPENSSL_DIR}/include
- 
- HOSTCC ?= gcc
-