ath79: fix whitespace issue in dts files

Fixes spaces vs. tabs issues and remove indentation on blank lines.

Signed-off-by: Mathias Kresin <[email protected]>

target/linux/ath79/dts/ar9331_etactica_eg200.dts

@@ -10,9 +10,9 @@
 	model = "eTactica EG200";
 	compatible = "etactica,eg200", "rme-eg200";
 
-        aliases {
-                serial0 = &uart;
-        };
+	aliases {
+		serial0 = &uart;
+	};
 
 	keys {
 		compatible = "gpio-keys-polled";

target/linux/ath79/dts/ar9331_tplink_tl-wr703n_tl-mr10u.dtsi

@@ -25,7 +25,7 @@
 			debounce-interval = <60>;
 		};
 	};
-	
+
 	gpio-leds {
 		compatible = "gpio-leds";
 

target/linux/ath79/dts/ar9341_pcs_cr3000.dts

@@ -21,7 +21,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
-                pinctrl-0 = <&jtag_disable_pins>;
+		pinctrl-0 = <&jtag_disable_pins>;
 
 		reset {
 			label = "Reset button";

target/linux/ath79/dts/ar9344.dtsi

@@ -51,7 +51,7 @@
 
 		interrupt-map-mask = <0 0 0 1>;
 		interrupt-map = <0 0 0 0 &pcie 0>;
-		
+
 		status = "disabled";
 	};
 };

target/linux/ath79/dts/ar9344_pcs_cap324.dts

@@ -21,7 +21,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
-                pinctrl-0 = <&jtag_disable_pins>;
+		pinctrl-0 = <&jtag_disable_pins>;
 
 		reset {
 			label = "Reset button";
@@ -133,7 +133,7 @@
 &pcie {
 	status = "okay";
 
-        ath9k: wifi@168c,0030 {
+	ath9k: wifi@168c,0030 {
 		compatible = "168c,0030";
 		reg = <0x0000 0 0 0 0>;
 		mtd-mac-address = <&art 0x0>;
@@ -143,7 +143,7 @@
 		qca,disable-5ghz;
 		#gpio-cells = <2>;
 		gpio-controller;
-        };
+	};
 };
 
 &wmac {

target/linux/ath79/dts/ar9344_pcs_cr5000.dts

@@ -22,7 +22,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
-                pinctrl-0 = <&jtag_disable_pins>;
+		pinctrl-0 = <&jtag_disable_pins>;
 
 		reset {
 			label = "Reset button";
@@ -142,12 +142,12 @@
 &pcie {
 	status = "okay";
 
-        ath9k: wifi@168c,0030 {
+	ath9k: wifi@168c,0030 {
 		compatible = "168c,0030";
 		mtd-mac-address = <&art 0x5002>;
 		#gpio-cells = <2>;
 		gpio-controller;
-        };
+	};
 };
 
 &mdio0 {
@@ -158,7 +158,7 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		phy-mode = "rgmii";
-                qca,ar8327-initvals = <
+		qca,ar8327-initvals = <
 			0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 			0x10 0x81000080 /* POWER_ON_STRAP */
 			0x50 0xcc35cc35 /* LED_CTRL0 */

target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi

@@ -141,15 +141,15 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 		qca,ar8327-initvals = <
-		    0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-		    0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
-		    0x10 0x81000080 /* POWER_ON_STRIP */
-		    0x50 0xcc35cc35 /* LED_CTRL0 */
-		    0x54 0xca35ca35 /* LED_CTRL1 */
-		    0x58 0xc935c935 /* LED_CTRL2 */
-		    0x5c 0x03ffff00 /* LED_CTRL3 */
-		    0x7c 0x0000007e /* PORT0_STATUS */
-		    0x94 0x0000007e /* PORT6 STATUS */
+			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+			0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+			0x10 0x81000080 /* POWER_ON_STRIP */
+			0x50 0xcc35cc35 /* LED_CTRL0 */
+			0x54 0xca35ca35 /* LED_CTRL1 */
+			0x58 0xc935c935 /* LED_CTRL2 */
+			0x5c 0x03ffff00 /* LED_CTRL3 */
+			0x7c 0x0000007e /* PORT0_STATUS */
+			0x94 0x0000007e /* PORT6 STATUS */
 		>;
 	};
 };

target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

@@ -183,8 +183,8 @@
 		phy-mode = "sgmii";
 
 		qca,ar8327-initvals = <
-		    0x04 0x00080080 /* PORT0 PAD MODE CTRL */
-		    0x7c 0x0000007e /* PORT0_STATUS */
+			0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+			0x7c 0x0000007e /* PORT0_STATUS */
 		>;
 	};
 };