|
|
@@ -0,0 +1,319 @@
|
|
|
+From fceb829eca2bc088ad66b18099b57dc96f1bae43 Mon Sep 17 00:00:00 2001
|
|
|
+From: Roger Pueyo Centelles <[email protected]>
|
|
|
+Date: Sun, 19 Oct 2014 17:50:01 +0200
|
|
|
+Subject: [PATCH] ramips: add support for Nexx WT3020 devices
|
|
|
+
|
|
|
+---
|
|
|
+ target/linux/ramips/base-files/etc/board.d/01_leds | 3 +
|
|
|
+ .../linux/ramips/base-files/etc/board.d/02_network | 1 +
|
|
|
+ target/linux/ramips/base-files/etc/diag.sh | 3 +
|
|
|
+ target/linux/ramips/base-files/lib/ramips.sh | 3 +
|
|
|
+ .../ramips/base-files/lib/upgrade/platform.sh | 1 +
|
|
|
+ target/linux/ramips/dts/WT3020-4M.dts | 100 +++++++++++++++++++++
|
|
|
+ target/linux/ramips/dts/WT3020-8M.dts | 100 +++++++++++++++++++++
|
|
|
+ target/linux/ramips/image/Makefile | 2 +
|
|
|
+ 8 files changed, 213 insertions(+)
|
|
|
+ create mode 100644 target/linux/ramips/dts/WT3020-4M.dts
|
|
|
+ create mode 100644 target/linux/ramips/dts/WT3020-8M.dts
|
|
|
+
|
|
|
+diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
|
|
|
+index 26f384d..7ca7ffb 100755
|
|
|
+--- a/target/linux/ramips/base-files/etc/board.d/01_leds
|
|
|
++++ b/target/linux/ramips/base-files/etc/board.d/01_leds
|
|
|
+@@ -213,6 +213,9 @@ case $board in
|
|
|
+ wt1520)
|
|
|
+ set_wifi_led "rt2800pci-phy0::radio"
|
|
|
+ ;;
|
|
|
++ wt3020)
|
|
|
++ ucidef_set_led_default "power" "power" "nexx:blue:power" "0"
|
|
|
++ ;;
|
|
|
+ y1 |\
|
|
|
+ y1s)
|
|
|
+ ucidef_set_led_default "power" "power" "lenovo:blue:power" "1"
|
|
|
+diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
|
|
|
+index 7ecec5f..ff8fbc0 100755
|
|
|
+--- a/target/linux/ramips/base-files/etc/board.d/02_network
|
|
|
++++ b/target/linux/ramips/base-files/etc/board.d/02_network
|
|
|
+@@ -127,6 +127,7 @@ ramips_setup_interfaces()
|
|
|
+ hg255d | \
|
|
|
+ rt-n14u | \
|
|
|
+ wrtnode | \
|
|
|
++ wt3020 | \
|
|
|
+ ur-326n4g | \
|
|
|
+ zbt-wa05)
|
|
|
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
|
|
|
+diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
|
|
|
+index aed7d6a..2977099 100755
|
|
|
+--- a/target/linux/ramips/base-files/etc/diag.sh
|
|
|
++++ b/target/linux/ramips/base-files/etc/diag.sh
|
|
|
+@@ -170,6 +170,9 @@ get_status_led() {
|
|
|
+ nexx-wt1520)
|
|
|
+ status_led="nexx-wt1520:white:power"
|
|
|
+ ;;
|
|
|
++ nexx-wt3020)
|
|
|
++ status_led="nexx:blue:power"
|
|
|
++ ;;
|
|
|
+ mzk-w300nh2)
|
|
|
+ status_led="mzkw300nh2:green:power"
|
|
|
+ ;;
|
|
|
+diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
|
|
|
+index 08c5dff..88fa623 100755
|
|
|
+--- a/target/linux/ramips/base-files/lib/ramips.sh
|
|
|
++++ b/target/linux/ramips/base-files/lib/ramips.sh
|
|
|
+@@ -184,6 +184,9 @@ ramips_board_detect() {
|
|
|
+ *"Nexx WT1520")
|
|
|
+ name="wt1520"
|
|
|
+ ;;
|
|
|
++ *"Nexx WT3020")
|
|
|
++ name="wt3020"
|
|
|
++ ;;
|
|
|
+ *"NW718")
|
|
|
+ name="nw718"
|
|
|
+ ;;
|
|
|
+diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
|
|
+index 61a0935..c9a418e 100755
|
|
|
+--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
|
|
++++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
|
|
|
+@@ -97,6 +97,7 @@ platform_check_image() {
|
|
|
+ wr8305rt |\
|
|
|
+ wrtnode |\
|
|
|
+ wt1520 |\
|
|
|
++ wt3020 |\
|
|
|
+ x5 |\
|
|
|
+ x8 |\
|
|
|
+ y1 |\
|
|
|
+diff --git a/target/linux/ramips/dts/WT3020-4M.dts b/target/linux/ramips/dts/WT3020-4M.dts
|
|
|
+new file mode 100644
|
|
|
+index 0000000..7583680
|
|
|
+--- /dev/null
|
|
|
++++ b/target/linux/ramips/dts/WT3020-4M.dts
|
|
|
+@@ -0,0 +1,100 @@
|
|
|
++/dts-v1/;
|
|
|
++
|
|
|
++/include/ "mt7620n.dtsi"
|
|
|
++
|
|
|
++/ {
|
|
|
++ compatible = "wt3020", "ralink,mt7620n-soc";
|
|
|
++ model = "Nexx WT3020";
|
|
|
++
|
|
|
++ palmbus@10000000 {
|
|
|
++ gpio2: gpio@660 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ gpio3: gpio@688 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ spi@b00 {
|
|
|
++ status = "okay";
|
|
|
++
|
|
|
++ m25p80@0 {
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <1>;
|
|
|
++ compatible = "w25q32";
|
|
|
++ reg = <0 0>;
|
|
|
++ linux,modalias = "m25p80", "w25q32";
|
|
|
++ spi-max-frequency = <10000000>;
|
|
|
++
|
|
|
++ partition@0 {
|
|
|
++ label = "u-boot";
|
|
|
++ reg = <0x0 0x30000>;
|
|
|
++ read-only;
|
|
|
++ };
|
|
|
++
|
|
|
++ partition@30000 {
|
|
|
++ label = "u-boot-env";
|
|
|
++ reg = <0x30000 0x10000>;
|
|
|
++ read-only;
|
|
|
++ };
|
|
|
++
|
|
|
++ factory: partition@40000 {
|
|
|
++ label = "factory";
|
|
|
++ reg = <0x40000 0x10000>;
|
|
|
++ read-only;
|
|
|
++ };
|
|
|
++
|
|
|
++ partition@50000 {
|
|
|
++ label = "firmware";
|
|
|
++ reg = <0x50000 0x3b0000>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ ehci@101c0000 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ ohci@101c1000 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ ethernet@10100000 {
|
|
|
++ mtd-mac-address = <&factory 0x4>;
|
|
|
++ ralink,port-map = "wllll";
|
|
|
++ };
|
|
|
++
|
|
|
++ wmac@10180000 {
|
|
|
++ ralink,mtd-eeprom = <&factory 0>;
|
|
|
++ };
|
|
|
++
|
|
|
++ pinctrl {
|
|
|
++ state_default: pinctrl0 {
|
|
|
++ default {
|
|
|
++ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
|
|
|
++ ralink,function = "gpio";
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ gpio-keys-polled {
|
|
|
++ compatible = "gpio-keys-polled";
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <0>;
|
|
|
++ poll-interval = <20>;
|
|
|
++ reset {
|
|
|
++ label = "reset";
|
|
|
++ gpios = <&gpio0 1 1>;
|
|
|
++ linux,code = <0x198>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ gpio-leds {
|
|
|
++ compatible = "gpio-leds";
|
|
|
++ power {
|
|
|
++ label = "nexx:blue:power";
|
|
|
++ gpios = <&gpio3 0 0>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
+diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts
|
|
|
+new file mode 100644
|
|
|
+index 0000000..5fa7c92
|
|
|
+--- /dev/null
|
|
|
++++ b/target/linux/ramips/dts/WT3020-8M.dts
|
|
|
+@@ -0,0 +1,100 @@
|
|
|
++/dts-v1/;
|
|
|
++
|
|
|
++/include/ "mt7620n.dtsi"
|
|
|
++
|
|
|
++/ {
|
|
|
++ compatible = "wt3020", "ralink,mt7620n-soc";
|
|
|
++ model = "Nexx WT3020";
|
|
|
++
|
|
|
++ palmbus@10000000 {
|
|
|
++ gpio2: gpio@660 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ gpio3: gpio@688 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ spi@b00 {
|
|
|
++ status = "okay";
|
|
|
++
|
|
|
++ m25p80@0 {
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <1>;
|
|
|
++ compatible = "w25q64";
|
|
|
++ reg = <0 0>;
|
|
|
++ linux,modalias = "m25p80", "w25q64";
|
|
|
++ spi-max-frequency = <10000000>;
|
|
|
++
|
|
|
++ partition@0 {
|
|
|
++ label = "u-boot";
|
|
|
++ reg = <0x0 0x30000>;
|
|
|
++ read-only;
|
|
|
++ };
|
|
|
++
|
|
|
++ partition@30000 {
|
|
|
++ label = "u-boot-env";
|
|
|
++ reg = <0x30000 0x10000>;
|
|
|
++ read-only;
|
|
|
++ };
|
|
|
++
|
|
|
++ factory: partition@40000 {
|
|
|
++ label = "factory";
|
|
|
++ reg = <0x40000 0x10000>;
|
|
|
++ read-only;
|
|
|
++ };
|
|
|
++
|
|
|
++ partition@50000 {
|
|
|
++ label = "firmware";
|
|
|
++ reg = <0x50000 0x7b0000>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ ehci@101c0000 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ ohci@101c1000 {
|
|
|
++ status = "okay";
|
|
|
++ };
|
|
|
++
|
|
|
++ ethernet@10100000 {
|
|
|
++ mtd-mac-address = <&factory 0x4>;
|
|
|
++ ralink,port-map = "wllll";
|
|
|
++ };
|
|
|
++
|
|
|
++ wmac@10180000 {
|
|
|
++ ralink,mtd-eeprom = <&factory 0>;
|
|
|
++ };
|
|
|
++
|
|
|
++ pinctrl {
|
|
|
++ state_default: pinctrl0 {
|
|
|
++ default {
|
|
|
++ ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
|
|
|
++ ralink,function = "gpio";
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ gpio-keys-polled {
|
|
|
++ compatible = "gpio-keys-polled";
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <0>;
|
|
|
++ poll-interval = <20>;
|
|
|
++ reset {
|
|
|
++ label = "reset";
|
|
|
++ gpios = <&gpio0 1 1>;
|
|
|
++ linux,code = <0x198>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ gpio-leds {
|
|
|
++ compatible = "gpio-leds";
|
|
|
++ power {
|
|
|
++ label = "nexx:blue:power";
|
|
|
++ gpios = <&gpio3 0 0>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
+diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
|
|
|
+index f048caf..a93b82c 100644
|
|
|
+--- a/target/linux/ramips/image/Makefile
|
|
|
++++ b/target/linux/ramips/image/Makefile
|
|
|
+@@ -769,6 +769,7 @@ Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR3
|
|
|
+ Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
|
|
|
+ Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
|
|
|
+ Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
|
|
|
++Image/Build/Profile/WT3020=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wt3020,WT3020)
|
|
|
+ Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
|
|
|
+
|
|
|
+ ifeq ($(SUBTARGET),mt7620n)
|
|
|
+@@ -778,6 +779,7 @@ define Image/Build/Profile/Default
|
|
|
+ $(call Image/Build/Profile/RT-N14U,$(1))
|
|
|
+ $(call Image/Build/Profile/WR8305RT,$(1))
|
|
|
+ $(call Image/Build/Profile/WRTNODE,$(1))
|
|
|
++ $(call Image/Build/Profile/WT3020,$(1))
|
|
|
+ $(call Image/Build/Profile/ZBT-WA05,$(1))
|
|
|
+ endef
|
|
|
+ endif
|
|
|
+--
|
|
|
+2.1.1
|
|
|
+
|
John Crispin