kernel: bump 5.4 to 5.4.169

All patches automatically rebased.

Build system: x86_64
Build-tested: ramips/mt7621*

*Had to revert 7f1edbd in order to build due to FS#4149

Signed-off-by: John Audia <[email protected]>

include/kernel-version.mk

@@ -6,10 +6,10 @@ ifdef CONFIG_TESTING_KERNEL
   KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
 endif
 
-LINUX_VERSION-5.4 = .167
+LINUX_VERSION-5.4 = .169
 LINUX_VERSION-5.10 = .88
 
-LINUX_KERNEL_HASH-5.4.167 = b4e43116217ee02009aba7eab3081e64560b81ce42bc6096fcd81257f470a5a7
+LINUX_KERNEL_HASH-5.4.169 = 554382d95f71afd5f9b49292eb5d1cbe3be1a0bad22d21487c9e6d506ee01a19
 LINUX_KERNEL_HASH-5.10.88 = 6f8631b6c382a2b0cfeff1e5f8805c8e1cfbe8d714b6e65f5bb79733c99068eb
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))

target/linux/generic/backport-5.4/782-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch

@@ -334,7 +334,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	}
 --- a/drivers/net/ethernet/broadcom/bcmsysport.c
 +++ b/drivers/net/ethernet/broadcom/bcmsysport.c
-@@ -2420,7 +2420,6 @@ static int bcm_sysport_probe(struct plat
+@@ -2423,7 +2423,6 @@ static int bcm_sysport_probe(struct plat
  	struct bcm_sysport_priv *priv;
  	struct device_node *dn;
  	struct net_device *dev;
@@ -342,7 +342,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	u32 txq, rxq;
  	int ret;
  
-@@ -2502,12 +2501,10 @@ static int bcm_sysport_probe(struct plat
+@@ -2505,12 +2504,10 @@ static int bcm_sysport_probe(struct plat
  	}
  
  	/* Initialize netdevice members */

target/linux/generic/pending-5.4/820-libata-Assign-OF-node-to-the-SCSI-device.patch

@@ -41,7 +41,7 @@ ChangeLog v1->v2:
  
  #include "libata.h"
  #include "libata-transport.h"
-@@ -4579,6 +4580,34 @@ int ata_scsi_add_hosts(struct ata_host *
+@@ -4590,6 +4591,34 @@ int ata_scsi_add_hosts(struct ata_host *
  	return rc;
  }
  
@@ -76,7 +76,7 @@ ChangeLog v1->v2:
  void ata_scsi_scan_host(struct ata_port *ap, int sync)
  {
  	int tries = 5;
-@@ -4604,6 +4633,7 @@ void ata_scsi_scan_host(struct ata_port
+@@ -4615,6 +4644,7 @@ void ata_scsi_scan_host(struct ata_port
  						 NULL);
  			if (!IS_ERR(sdev)) {
  				dev->sdev = sdev;

target/linux/ipq40xx/patches-5.4/0005-01-v5.8-net-phy-mdio-add-IPQ4019-MDIO-driver.patch

@@ -37,7 +37,7 @@ Signed-off-by: David S. Miller <[email protected]>
  	depends on ARCH_MOXART || COMPILE_TEST
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium
+@@ -49,6 +49,7 @@ obj-$(CONFIG_MDIO_CAVIUM)	+= mdio-cavium
  obj-$(CONFIG_MDIO_GPIO)		+= mdio-gpio.o
  obj-$(CONFIG_MDIO_HISI_FEMAC)	+= mdio-hisi-femac.o
  obj-$(CONFIG_MDIO_I2C)		+= mdio-i2c.o

target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -584,6 +584,13 @@ config XILINX_GMII2RGMII
+@@ -580,6 +580,13 @@ config XILINX_GMII2RGMII
  	  the Reduced Gigabit Media Independent Interface(RGMII) between
  	  Ethernet physical media devices and the Gigabit Ethernet controller.
  
@@ -16,7 +16,7 @@
  config MICREL_KS8995MA
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -69,6 +69,7 @@ ifdef CONFIG_HWMON
+@@ -68,6 +68,7 @@ ifdef CONFIG_HWMON
  aquantia-objs			+= aquantia_hwmon.o
  endif
  obj-$(CONFIG_AQUANTIA_PHY)	+= aquantia.o

target/linux/ipq40xx/patches-5.4/707-net-phy-Add-Qualcom-QCA807x-driver.patch

@@ -25,7 +25,7 @@ Signed-off-by: Robert Marko <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -537,6 +537,12 @@ config NXP_TJA11XX_PHY
+@@ -533,6 +533,12 @@ config NXP_TJA11XX_PHY
  	---help---
  	  Currently supports the NXP TJA1100 and TJA1101 PHY.
  
@@ -40,7 +40,7 @@ Signed-off-by: Robert Marko <[email protected]>
  	---help---
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -103,6 +103,7 @@ obj-$(CONFIG_MICROSEMI_PHY)	+= mscc.o
+@@ -102,6 +102,7 @@ obj-$(CONFIG_MICROSEMI_PHY)	+= mscc.o
  obj-$(CONFIG_NATIONAL_PHY)	+= national.o
  obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
  obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o

target/linux/layerscape/patches-5.4/701-net-0327-at803x-Address-packet-drops-at-low-traffic-rate-due-.patch

@@ -22,7 +22,7 @@ Signed-off-by: Vladimir Oltean <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -367,6 +367,16 @@ config AT803X_PHY
+@@ -363,6 +363,16 @@ config AT803X_PHY
  	---help---
  	  Currently supports the AT8030 and AT8035 model
  

target/linux/layerscape/patches-5.4/701-net-0328-net-phy-Inphi-IN112525_s03-retimer-support.patch

@@ -15,7 +15,7 @@ Signed-off-by: Florin Chiculita <[email protected]>
 
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -475,6 +475,11 @@ config ICPLUS_PHY
+@@ -471,6 +471,11 @@ config ICPLUS_PHY
  	---help---
  	  Currently supports the IP175C and IP1001 PHYs.
  
@@ -29,7 +29,7 @@ Signed-off-by: Florin Chiculita <[email protected]>
  	---help---
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -87,6 +87,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
+@@ -86,6 +86,7 @@ obj-$(CONFIG_DP83848_PHY)	+= dp83848.o
  obj-$(CONFIG_DP83867_PHY)	+= dp83867.o
  obj-$(CONFIG_FIXED_PHY)		+= fixed_phy.o
  obj-$(CONFIG_ICPLUS_PHY)	+= icplus.o

target/linux/realtek/patches-5.4/705-add-rtl-phy.patch

@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/Kconfig
 +++ b/drivers/net/phy/Kconfig
-@@ -540,6 +540,12 @@ config REALTEK_PHY
+@@ -536,6 +536,12 @@ config REALTEK_PHY
  	---help---
  	  Supports the Realtek 821x PHY.
  
@@ -15,7 +15,7 @@
  	---help---
 --- a/drivers/net/phy/Makefile
 +++ b/drivers/net/phy/Makefile
-@@ -102,6 +102,7 @@ obj-$(CONFIG_NATIONAL_PHY)	+= national.o
+@@ -101,6 +101,7 @@ obj-$(CONFIG_NATIONAL_PHY)	+= national.o
  obj-$(CONFIG_NXP_TJA11XX_PHY)	+= nxp-tja11xx.o
  obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
  obj-$(CONFIG_REALTEK_PHY)	+= realtek.o