ar71xx: add support for the Senao EAP7660D board

This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <[email protected]>

SVN-Revision: 21837

target/linux/ar71xx/base-files/etc/defconfig/eap7660d/network

@@ -0,0 +1,12 @@
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option type	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -25,6 +25,9 @@ ar71xx_board_name() {
 	*"DIR-825 rev. B1")
 		name="dir-825-b1"
 		;;
+	*EAP7660D)
+		name="eap7660d"
+		;;
 	*"Bullet M")
 		name="bullet-m"
 		;;

target/linux/ar71xx/config-2.6.32

@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -187,6 +188,7 @@ CONFIG_PCI=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set

target/linux/ar71xx/config-2.6.33

@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -195,6 +196,7 @@ CONFIG_PCI=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set

target/linux/ar71xx/config-2.6.34

@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -195,6 +196,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set

target/linux/ar71xx/config-2.6.35

@@ -23,6 +23,7 @@ CONFIG_AR71XX_MACH_AW_NR580=y
 CONFIG_AR71XX_MACH_DIR_600_A1=y
 CONFIG_AR71XX_MACH_DIR_615_C1=y
 CONFIG_AR71XX_MACH_DIR_825_B1=y
+CONFIG_AR71XX_MACH_EAP7660D=y
 CONFIG_AR71XX_MACH_MZK_W04NU=y
 CONFIG_AR71XX_MACH_MZK_W300NH=y
 CONFIG_AR71XX_MACH_NBG460N=y
@@ -195,6 +196,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -223,6 +223,14 @@ config AR71XX_MACH_UBNT
 	select AR71XX_DEV_USB
 	default n
 
+config AR71XX_MACH_EAP7660D
+	bool "Senao EAP7660D support"
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_PB42_PCI if PCI
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	default n
+
 endmenu
 
 config AR71XX_DEV_M25P80

target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_AR71XX_MACH_AW_NR580)	+= mach-aw-nr580.o
 obj-$(CONFIG_AR71XX_MACH_DIR_600_A1)	+= mach-dir-600-a1.o
 obj-$(CONFIG_AR71XX_MACH_DIR_615_C1)	+= mach-dir-615-c1.o
 obj-$(CONFIG_AR71XX_MACH_DIR_825_B1)	+= mach-dir-825-b1.o
+obj-$(CONFIG_AR71XX_MACH_EAP7660D)	+= mach-eap7660d.o
 obj-$(CONFIG_AR71XX_MACH_MZK_W04NU)	+= mach-mzk-w04nu.o
 obj-$(CONFIG_AR71XX_MACH_MZK_W300NH)	+= mach-mzk-w300nh.o
 obj-$(CONFIG_AR71XX_MACH_NBG460N)	+= mach-nbg460n.o

target/linux/ar71xx/files/arch/mips/ar71xx/mach-eap7660d.c

@@ -0,0 +1,89 @@
+/*
+ *  Senao EAP7660D board support
+ *
+ *  Copyright (C) 2010 Daniel Golle <[email protected]>
+ *  Copyright (C) 2008 Gabor Juhos <[email protected]>
+ *  Copyright (C) 2008 Imre Kaloz <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-pb42-pci.h"
+#include "dev-m25p80.h"
+
+#define EAP7660D_BUTTONS_POLL_INTERVAL	20
+#define EAP7660D_GPIO_DS4		7
+#define EAP7660D_GPIO_DS5		2
+#define EAP7660D_GPIO_DS7		0
+#define EAP7660D_GPIO_DS8		4
+#define EAP7660D_GPIO_SW1		3
+#define EAP7660D_GPIO_SW3		8
+#define EAP7660D_PHYMASK		BIT(20)
+
+static struct gpio_led eap7660d_leds_gpio[] __initdata = {
+	{
+		.name		= "eap7660d:green:ds8",
+		.gpio		= EAP7660D_GPIO_DS8,
+		.active_low	= 0,
+	},
+	{
+		.name		= "eap7660d:green:ds5",
+		.gpio		= EAP7660D_GPIO_DS5,
+		.active_low	= 0,
+	},
+	{
+		.name		= "eap7660d:green:ds7",
+		.gpio		= EAP7660D_GPIO_DS7,
+		.active_low	= 0,
+	},
+	{
+		.name		= "eap7660d:green:ds4",
+		.gpio		= EAP7660D_GPIO_DS4,
+		.active_low	= 0,
+	}
+};
+
+static struct gpio_button eap7660d_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= EAP7660D_GPIO_SW1,
+		.active_low	= 1,
+	},
+	{
+		.desc		= "wps",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.threshold	= 3,
+		.gpio		= EAP7660D_GPIO_SW3,
+		.active_low	= 1,
+	}
+};
+
+static void __init eap7660d_setup(void)
+{
+	ar71xx_add_device_mdio(~EAP7660D_PHYMASK);
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.phy_mask = EAP7660D_PHYMASK;
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_m25p80(NULL);
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
+					eap7660d_leds_gpio);
+	ar71xx_add_device_gpio_buttons(-1, EAP7660D_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(eap7660d_gpio_buttons),
+					eap7660d_gpio_buttons);
+	pb42_pci_init();
+};
+
+MIPS_MACHINE(AR71XX_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
+	     eap7660d_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h

@@ -54,6 +54,7 @@ enum ar71xx_mach_type {
 	AR71XX_MACH_WRT160NL,	/* Linksys WRT160NL */
 	AR71XX_MACH_WRT400N,	/* Linksys WRT400N */
 	AR71XX_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
+	AR71XX_MACH_EAP7660D,	/* Senao EAP7660D */
 };
 
 #endif /* _AR71XX_MACHTYPE_H */

target/linux/ar71xx/image/Makefile

@@ -452,6 +452,10 @@ define Image/Build/Profile/DIR600A1
 	$(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,dir-600-a1,board=DIR-600-A1,"AP91-AR7240-RT-090223-00")
 endef
 
+define Image/Build/Profile/EAP7660D
+	$(call Image/Build/Template/$(fs_128k)/$(1),PB4X,eap7660d,board=EAP7660D)
+endef
+
 define Image/Build/Profile/FR54RTR
 	$(call Image/Build/Template/$(fs_64k)/$(1),Cameo7240,fr-54rtr,board=DIR-600-A1,"AP91-AR7240-RT-090223-01")
 endef
@@ -572,6 +576,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/DIR600A1,$(1))
 	$(call Image/Build/Profile/DIR615C1,$(1))
 	$(call Image/Build/Profile/DIR825B1,$(1))
+	$(call Image/Build/Profile/EAP7660D,$(1))
 	$(call Image/Build/Profile/FR54RTR,$(1))
 	$(call Image/Build/Profile/MZKW04NU,$(1))
 	$(call Image/Build/Profile/MZKW300NH,$(1))
@@ -601,6 +606,7 @@ define Image/Build/Profile/Minimal
 endef
 
 define Image/Build/Profile/Madwifi
+	$(call Image/Build/Profile/EAP7660D,$(1))
 	$(call Image/Build/Profile/UBNTRS,$(1))
 	$(call Image/Build/Profile/UBNTRSPRO,$(1))
 	$(call Image/Build/Profile/UBNTLSSR71,$(1))