realtek: activate clock driver for RTL838X/RTL839X targets

Make use the new clock driver for RTL838X and RTL839x target devices. Of course
we will enable their primary consumer (cpufreq-dt) too. To be careful just set
the default governor to userspace. As we rely on SRAM activate that module too.

Signed-off-by: Markus Stockhausen <[email protected]>

target/linux/realtek/rtl838x/config-5.10

@@ -6,6 +6,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BMIPS_CPUFREQ is not set
 CONFIG_CEVT_R4K=y
 CONFIG_CEVT_RTL9300=y
 CONFIG_CLKDEV_LOOKUP=y
@@ -13,9 +14,24 @@ CONFIG_CLKSRC_MMIO=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_BOSTON=y
+CONFIG_COMMON_CLK_REALTEK=y
+CONFIG_COMMON_CLK_RTL83XX=y
 CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
 CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_GENERIC_DUMP_TLB=y
 CONFIG_CPU_HAS_DIEI=y
 CONFIG_CPU_HAS_PREFETCH=y
@@ -28,6 +44,7 @@ CONFIG_CPU_MIPSR2=y
 CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
 CONFIG_CPU_R4K_CACHE_TLB=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_CPUFREQ=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_MSA=y
 CONFIG_CRYPTO_BLAKE2S=y
@@ -121,6 +138,7 @@ CONFIG_MIPS_CLOCK_VSYSCALL=y
 # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
 CONFIG_MIPS_CMDLINE_FROM_DTB=y
 # CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_EXTERNAL_TIMER=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_MIPS_LD_CAN_LINK_VDSO=y
 # CONFIG_MIPS_NO_APPENDED_DTB is not set
@@ -164,6 +182,7 @@ CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
 CONFIG_PHYLINK=y
 CONFIG_PINCTRL=y
+CONFIG_PM_OPP=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_SYSCON=y
@@ -186,6 +205,7 @@ CONFIG_SFP=y
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 CONFIG_SPI_MEM=y
+CONFIG_SRAM=y
 CONFIG_SRCU=y
 CONFIG_SWPHY=y
 CONFIG_SYSCTL_EXCEPTION_TRACE=y

target/linux/realtek/rtl839x/config-5.10

@@ -6,6 +6,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BMIPS_CPUFREQ is not set
 CONFIG_CEVT_R4K=y
 CONFIG_CEVT_RTL9300=y
 CONFIG_CLKDEV_LOOKUP=y
@@ -13,9 +14,24 @@ CONFIG_CLKSRC_MMIO=y
 CONFIG_CLONE_BACKWARDS=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_BOSTON=y
+CONFIG_COMMON_CLK_REALTEK=y
+CONFIG_COMMON_CLK_RTL83XX=y
 CONFIG_COMPAT_32BIT_TIME=y
 CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
 CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
 CONFIG_CPU_GENERIC_DUMP_TLB=y
 CONFIG_CPU_HAS_DIEI=y
 CONFIG_CPU_HAS_PREFETCH=y
@@ -28,6 +44,7 @@ CONFIG_CPU_MIPSR2=y
 CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
 CONFIG_CPU_R4K_CACHE_TLB=y
 CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_CPUFREQ=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_MSA=y
 CONFIG_CRYPTO_BLAKE2S=y
@@ -118,6 +135,7 @@ CONFIG_MIPS_CLOCK_VSYSCALL=y
 # CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
 CONFIG_MIPS_CMDLINE_FROM_DTB=y
 # CONFIG_MIPS_ELF_APPENDED_DTB is not set
+CONFIG_MIPS_EXTERNAL_TIMER=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 CONFIG_MIPS_LD_CAN_LINK_VDSO=y
 # CONFIG_MIPS_NO_APPENDED_DTB is not set
@@ -162,6 +180,7 @@ CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
 CONFIG_PHYLINK=y
 CONFIG_PINCTRL=y
+CONFIG_PM_OPP=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
 CONFIG_POWER_RESET_SYSCON=y
@@ -184,6 +203,7 @@ CONFIG_SFP=y
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 CONFIG_SPI_MEM=y
+CONFIG_SRAM=y
 CONFIG_SRCU=y
 CONFIG_SWPHY=y
 CONFIG_SYSCTL_EXCEPTION_TRACE=y