econet: Clean up kernel config and move subtarget devices into own file

The kernel config accidentally contains CONFIG_UBIFS_FS_AUTHENTICATION
which select a number of other unnecessary components, remove them.

The target has at least two subtargets, only one is currently
implemented. Move the Device builds into a file for this subtarget.

Signed-off-by: Caleb James DeLisle <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/20027
Signed-off-by: Hauke Mehrtens <[email protected]>

target/linux/econet/en751221/config-6.12

@@ -2,13 +2,8 @@ CONFIG_ARCH_32BIT_OFF_T=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
 CONFIG_ARCH_MMAP_RND_BITS_MAX=15
 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ASN1=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_ASYMMETRIC_KEY_TYPE=y
-CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
 CONFIG_CLKSRC_MMIO=y
 CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
 CONFIG_COMPAT_32BIT_TIME=y
@@ -32,20 +27,15 @@ CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_CPU_SUPPORTS_MSA=y
 CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
 CONFIG_CRYPTO_LIB_GF128MUL=y
 CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2
 CONFIG_CRYPTO_LIB_SHA1=y
 CONFIG_CRYPTO_LIB_UTILS=y
 CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SIG=y
-CONFIG_CRYPTO_SIG2=y
 CONFIG_CRYPTO_ZSTD=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_ZBOOT=y
@@ -95,8 +85,6 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_MIPS_CPU=y
 CONFIG_IRQ_WORK=y
 # CONFIG_JFFS2_FS is not set
-CONFIG_KEYS=y
-CONFIG_LIBCRC32C=m
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
 CONFIG_LZO_COMPRESS=y
@@ -114,7 +102,6 @@ CONFIG_MIPS_RAW_APPENDED_DTB=y
 CONFIG_MIPS_SPRAM=y
 CONFIG_MMU_LAZY_TLB_REFCOUNT=y
 CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
 CONFIG_MTD_NAND_CORE=y
 CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_MTK_BMT=y
@@ -137,7 +124,6 @@ CONFIG_OF_FLATTREE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_IRQ=y
 CONFIG_OF_KOBJ=y
-CONFIG_OID_REGISTRY=y
 CONFIG_PADATA=y
 CONFIG_PAGE_POOL=y
 CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
@@ -145,9 +131,6 @@ CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
 CONFIG_PCI_DRIVERS_LEGACY=y
 CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
-CONFIG_PKCS7_MESSAGE_PARSER=y
-# CONFIG_PKCS7_TEST_KEY is not set
-# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
 CONFIG_PTP_1588_CLOCK_OPTIONAL=y
 CONFIG_QUEUED_RWLOCKS=y
 CONFIG_QUEUED_SPINLOCKS=y
@@ -155,7 +138,6 @@ CONFIG_RANDSTRUCT_NONE=y
 CONFIG_RATIONAL=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
-# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
 CONFIG_SERIAL_MCTRL_GPIO=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SGL_ALLOC=y
@@ -169,9 +151,6 @@ CONFIG_SPI_MASTER=y
 CONFIG_SPI_MEM=y
 CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
 CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSTEM_DATA_VERIFICATION=y
-# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
-CONFIG_SYSTEM_TRUSTED_KEYRING=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_CPU_MIPS32_R2=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
@@ -188,13 +167,9 @@ CONFIG_TIMER_OF=y
 CONFIG_TIMER_PROBE=y
 CONFIG_TREE_RCU=y
 CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_ATIME_SUPPORT=y
 CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_AUTHENTICATION=y
-CONFIG_UBIFS_FS_SECURITY=y
 CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
 CONFIG_USE_OF=y
-CONFIG_X509_CERTIFICATE_PARSER=y
 CONFIG_XPS=y
 CONFIG_XXHASH=y
 CONFIG_ZBOOT_LOAD_ADDRESS=0x80020000

target/linux/econet/image/Makefile

@@ -21,31 +21,6 @@ define Device/Default
   KERNEL := kernel-bin | append-dtb
 endef
 
-define Device/smartfiber_xp8421-b
-  DEVICE_VENDOR := SmartFiber
-  DEVICE_MODEL := XP8421-B
-  DEVICE_DTS := en751221_smartfiber_xp8421-b
-  IMAGES := tclinux.trx
-  IMAGE/tclinux.trx := append-kernel | lzma | tclinux-trx
-endef
-TARGET_DEVICES += smartfiber_xp8421-b
-
-# NOTE: This will not work for upgrading from factory because it requires a cryptographic signature
-#       however, it it can be flashed, then it will boot correctly.
-define Device/tplink_archer-vr1200v-v2
-  DEVICE_VENDOR := TP-Link
-  DEVICE_MODEL := Archer vr1200v
-  DEVICE_VARIANT := v2
-  TPLINK_FLASHLAYOUT := 16Mmtk
-  TPLINK_HWID := 0x0b473502
-  TPLINK_HWREV := 0x0006007c
-  TPLINK_HWREVADD := 0x0
-  TPLINK_HVERSION := 3
-  DEVICE_DTS := en751221_tplink_archer-vr1200v-v2
-  IMAGES := sysupgrade.bin
-  IMAGE/sysupgrade.bin := append-kernel | lzma | pad-to 4193792 | append-rootfs | \
-    tplink-v2-header -R 0x400000
-endef
-TARGET_DEVICES += tplink_archer-vr1200v-v2
+include $(SUBTARGET).mk
 
 $(eval $(call BuildImage))

target/linux/econet/image/en751221.mk

@@ -0,0 +1,26 @@
+define Device/smartfiber_xp8421-b
+  DEVICE_VENDOR := SmartFiber
+  DEVICE_MODEL := XP8421-B
+  DEVICE_DTS := en751221_smartfiber_xp8421-b
+  IMAGES := tclinux.trx
+  IMAGE/tclinux.trx := append-kernel | lzma | tclinux-trx
+endef
+TARGET_DEVICES += smartfiber_xp8421-b
+
+# NOTE: This will not work for upgrading from factory because it requires a cryptographic signature
+#       however, it it can be flashed, then it will boot correctly.
+define Device/tplink_archer-vr1200v-v2
+  DEVICE_VENDOR := TP-Link
+  DEVICE_MODEL := Archer vr1200v
+  DEVICE_VARIANT := v2
+  TPLINK_FLASHLAYOUT := 16Mmtk
+  TPLINK_HWID := 0x0b473502
+  TPLINK_HWREV := 0x0006007c
+  TPLINK_HWREVADD := 0x0
+  TPLINK_HVERSION := 3
+  DEVICE_DTS := en751221_tplink_archer-vr1200v-v2
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin := append-kernel | lzma | pad-to 4193792 | append-rootfs | \
+    tplink-v2-header -R 0x400000
+endef
+TARGET_DEVICES += tplink_archer-vr1200v-v2