|
|
@@ -0,0 +1,288 @@
|
|
|
+diff --git a/arch/arm/dts/mt7981-glinet-gl-x3000.dts b/arch/arm/dts/mt7981-glinet-gl-x3000.dts
|
|
|
+new file mode 100644
|
|
|
+index 0000000..911a702
|
|
|
+--- /dev/null
|
|
|
++++ b/arch/arm/dts/mt7981-glinet-gl-x3000.dts
|
|
|
+@@ -0,0 +1,144 @@
|
|
|
++// SPDX-License-Identifier: GPL-2.0
|
|
|
++
|
|
|
++/dts-v1/;
|
|
|
++#include "mt7981.dtsi"
|
|
|
++#include <dt-bindings/gpio/gpio.h>
|
|
|
++#include <dt-bindings/input/linux-event-codes.h>
|
|
|
++
|
|
|
++/ {
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <1>;
|
|
|
++ model = "GL.iNet GL-X3000";
|
|
|
++ compatible = "glinet,gl-x3000", "mediatek,mt7981";
|
|
|
++
|
|
|
++ chosen {
|
|
|
++ stdout-path = &uart0;
|
|
|
++ tick-timer = &timer0;
|
|
|
++ };
|
|
|
++
|
|
|
++ memory@40000000 {
|
|
|
++ device_type = "memory";
|
|
|
++ reg = <0x40000000 0x20000000>;
|
|
|
++ };
|
|
|
++
|
|
|
++ reg_3p3v: regulator-3p3v {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "fixed-3.3V";
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-always-on;
|
|
|
++ };
|
|
|
++
|
|
|
++ keys {
|
|
|
++ compatible = "gpio-keys";
|
|
|
++
|
|
|
++ reset {
|
|
|
++ label = "reset";
|
|
|
++ linux,code = <KEY_RESTART>;
|
|
|
++ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ leds {
|
|
|
++ compatible = "gpio-leds";
|
|
|
++
|
|
|
++ wifi2g {
|
|
|
++ label = "green:wifi2g";
|
|
|
++ gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ wifi5g {
|
|
|
++ label = "green:wifi5g";
|
|
|
++ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ 5g_led1 {
|
|
|
++ label = "green:5g:led1";
|
|
|
++ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ 5g_led2 {
|
|
|
++ label = "green:5g:led2";
|
|
|
++ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ 5g_led3 {
|
|
|
++ label = "green:5g:led3";
|
|
|
++ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ 5g_led4 {
|
|
|
++ label = "green:5g:led4";
|
|
|
++ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
|
|
|
++ };
|
|
|
++
|
|
|
++ power {
|
|
|
++ label = "green:power";
|
|
|
++ gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ wan {
|
|
|
++ label = "green:wan";
|
|
|
++ gpios = <&gpio 31 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++ð {
|
|
|
++ status = "okay";
|
|
|
++ mediatek,gmac-id = <1>;
|
|
|
++ phy-mode = "gmii";
|
|
|
++ phy-handle = <&phy0>;
|
|
|
++
|
|
|
++ mdio {
|
|
|
++ phy0: ethernet-phy@0 {
|
|
|
++ compatible = "ethernet-phy-id03a2.9461";
|
|
|
++ reg = <0x0>;
|
|
|
++ phy-mode = "gmii";
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&mmc0 {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&mmc0_pins_default>;
|
|
|
++ max-frequency = <52000000>;
|
|
|
++ bus-width = <8>;
|
|
|
++ cap-mmc-hw-highspeed;
|
|
|
++ cap-mmc-hw-reset;
|
|
|
++ vmmc-supply = <®_3p3v>;
|
|
|
++ non-removable;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&pinctrl {
|
|
|
++ mmc0_pins_default: mmc0-pins-default {
|
|
|
++ mux {
|
|
|
++ function = "flash";
|
|
|
++ groups = "emmc_45";
|
|
|
++ };
|
|
|
++ conf-cmd-dat {
|
|
|
++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO",
|
|
|
++ "SPI0_CS", "SPI0_HOLD", "SPI0_WP",
|
|
|
++ "SPI1_CLK", "SPI1_MOSI", "SPI1_MISO";
|
|
|
++ input-enable;
|
|
|
++ drive-strength = <MTK_DRIVE_4mA>;
|
|
|
++ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
|
++ };
|
|
|
++ conf-clk {
|
|
|
++ pins = "SPI1_CS";
|
|
|
++ drive-strength = <MTK_DRIVE_6mA>;
|
|
|
++ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
|
++ };
|
|
|
++ conf-rst {
|
|
|
++ pins = "GPIO_WPS";
|
|
|
++ drive-strength = <MTK_DRIVE_4mA>;
|
|
|
++ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&uart0 {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
+diff --git a/configs/mt7981_glinet_gl-x3000_defconfig b/configs/mt7981_glinet_gl-x3000_defconfig
|
|
|
+new file mode 100644
|
|
|
+index 0000000..96ad96f
|
|
|
+--- /dev/null
|
|
|
++++ b/configs/mt7981_glinet_gl-x3000_defconfig
|
|
|
+@@ -0,0 +1,100 @@
|
|
|
++CONFIG_ARM=y
|
|
|
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
|
|
|
++CONFIG_POSITION_INDEPENDENT=y
|
|
|
++CONFIG_ARCH_MEDIATEK=y
|
|
|
++CONFIG_TEXT_BASE=0x41e00000
|
|
|
++CONFIG_SYS_MALLOC_F_LEN=0x4000
|
|
|
++CONFIG_NR_DRAM_BANKS=1
|
|
|
++CONFIG_ENV_SIZE=0x80000
|
|
|
++CONFIG_ENV_OFFSET=0x400000
|
|
|
++CONFIG_DEFAULT_DEVICE_TREE="mt7981-glinet-gl-x3000"
|
|
|
++CONFIG_OF_LIBFDT_OVERLAY=y
|
|
|
++CONFIG_TARGET_MT7981=y
|
|
|
++CONFIG_DEBUG_UART_BASE=0x11002000
|
|
|
++CONFIG_DEBUG_UART_CLOCK=40000000
|
|
|
++CONFIG_SYS_LOAD_ADDR=0x46000000
|
|
|
++CONFIG_DEBUG_UART=y
|
|
|
++CONFIG_ENV_VARS_UBOOT_CONFIG=y
|
|
|
++# CONFIG_EXPERT is not set
|
|
|
++CONFIG_FIT=y
|
|
|
++# CONFIG_BOOTSTD is not set
|
|
|
++# CONFIG_LEGACY_IMAGE_FORMAT is not set
|
|
|
++CONFIG_AUTOBOOT_MENU_SHOW=y
|
|
|
++CONFIG_USE_BOOTCOMMAND=y
|
|
|
++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981-glinet-gl-x3000.dtb"
|
|
|
++CONFIG_LOGLEVEL=7
|
|
|
++CONFIG_BOARD_LATE_INIT=y
|
|
|
++CONFIG_HUSH_PARSER=y
|
|
|
++CONFIG_SYS_PROMPT="MT7981> "
|
|
|
++CONFIG_SYS_CBSIZE=512
|
|
|
++CONFIG_SYS_PBSIZE=1049
|
|
|
++CONFIG_CMD_CPU=y
|
|
|
++CONFIG_CMD_LICENSE=y
|
|
|
++# CONFIG_BOOTM_NETBSD is not set
|
|
|
++# CONFIG_BOOTM_PLAN9 is not set
|
|
|
++# CONFIG_BOOTM_RTEMS is not set
|
|
|
++# CONFIG_BOOTM_VXWORKS is not set
|
|
|
++CONFIG_CMD_BOOTMENU=y
|
|
|
++# CONFIG_CMD_ELF is not set
|
|
|
++CONFIG_CMD_ASKENV=y
|
|
|
++CONFIG_CMD_ERASEENV=y
|
|
|
++CONFIG_CMD_ENV_FLAGS=y
|
|
|
++CONFIG_CMD_STRINGS=y
|
|
|
++# CONFIG_CMD_UNLZ4 is not set
|
|
|
++# CONFIG_CMD_UNZIP is not set
|
|
|
++CONFIG_CMD_DM=y
|
|
|
++CONFIG_CMD_GPIO=y
|
|
|
++CONFIG_CMD_GPT=y
|
|
|
++CONFIG_CMD_GPT_RENAME=y
|
|
|
++CONFIG_CMD_MMC=y
|
|
|
++CONFIG_CMD_PART=y
|
|
|
++CONFIG_CMD_READ=y
|
|
|
++CONFIG_CMD_WRITE=y
|
|
|
++CONFIG_CMD_DHCP=y
|
|
|
++CONFIG_CMD_TFTPSRV=y
|
|
|
++CONFIG_CMD_RARP=y
|
|
|
++CONFIG_CMD_PING=y
|
|
|
++CONFIG_CMD_CDP=y
|
|
|
++CONFIG_CMD_SNTP=y
|
|
|
++CONFIG_CMD_DNS=y
|
|
|
++CONFIG_CMD_LINK_LOCAL=y
|
|
|
++CONFIG_CMD_PXE=y
|
|
|
++CONFIG_CMD_CACHE=y
|
|
|
++CONFIG_CMD_PSTORE=y
|
|
|
++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
|
|
|
++CONFIG_CMD_UUID=y
|
|
|
++CONFIG_CMD_HASH=y
|
|
|
++CONFIG_CMD_SMC=y
|
|
|
++CONFIG_PARTITION_TYPE_GUID=y
|
|
|
++CONFIG_ENV_OVERWRITE=y
|
|
|
++CONFIG_ENV_IS_IN_MMC=y
|
|
|
++CONFIG_USE_DEFAULT_ENV_FILE=y
|
|
|
++CONFIG_DEFAULT_ENV_FILE="glinet_gl-x3000_env"
|
|
|
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
|
|
++CONFIG_NET_RANDOM_ETHADDR=y
|
|
|
++CONFIG_REGMAP=y
|
|
|
++CONFIG_SYSCON=y
|
|
|
++CONFIG_BUTTON=y
|
|
|
++CONFIG_BUTTON_GPIO=y
|
|
|
++CONFIG_CLK=y
|
|
|
++CONFIG_GPIO_HOG=y
|
|
|
++CONFIG_LED=y
|
|
|
++CONFIG_LED_BLINK=y
|
|
|
++CONFIG_LED_GPIO=y
|
|
|
++CONFIG_MMC_HS200_SUPPORT=y
|
|
|
++CONFIG_MMC_MTK=y
|
|
|
++CONFIG_PHY_FIXED=y
|
|
|
++CONFIG_MEDIATEK_ETH=y
|
|
|
++CONFIG_PINCTRL=y
|
|
|
++CONFIG_PINCONF=y
|
|
|
++CONFIG_PINCTRL_MT7981=y
|
|
|
++CONFIG_POWER_DOMAIN=y
|
|
|
++CONFIG_MTK_POWER_DOMAIN=y
|
|
|
++CONFIG_DM_REGULATOR=y
|
|
|
++CONFIG_DM_REGULATOR_FIXED=y
|
|
|
++CONFIG_DM_SERIAL=y
|
|
|
++CONFIG_MTK_SERIAL=y
|
|
|
++CONFIG_HEXDUMP=y
|
|
|
++# CONFIG_EFI_LOADER is not set
|
|
|
++CONFIG_LMB_MAX_REGIONS=64
|
|
|
++# CONFIG_TOOLS_LIBCRYPTO is not set
|
|
|
+diff --git a/glinet_gl-x3000_env b/glinet_gl-x3000_env
|
|
|
+new file mode 100644
|
|
|
+index 0000000..e624e41
|
|
|
+--- /dev/null
|
|
|
++++ b/glinet_gl-x3000_env
|
|
|
+@@ -0,0 +1,26 @@
|
|
|
++ipaddr=192.168.1.1
|
|
|
++serverip=192.168.1.254
|
|
|
++loadaddr=0x46000000
|
|
|
++bootdelay=3
|
|
|
++bootfile_bl2=openwrt-mediatek-filogic-glinet_gl-x3000-preloader.bin
|
|
|
++bootfile_fip=openwrt-mediatek-filogic-glinet_gl-x3000-bl31-uboot.fip
|
|
|
++bootfile_firmware=openwrt-mediatek-filogic-glinet_gl-x3000-squashfs-factory.bin
|
|
|
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
|
|
|
++bootmenu_title= *** U-Boot Boot Menu for GL-iNet GL-X3000 ***
|
|
|
++bootmenu_0=Startup system (Default).=run boot_system
|
|
|
++bootmenu_1=Load Firmware via TFTP then write to eMMC.=run boot_tftp_firmware ; run bootmenu_confirm_return
|
|
|
++bootmenu_2=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return
|
|
|
++bootmenu_3=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
|
|
|
++bootmenu_4=Reboot.=reset
|
|
|
++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset
|
|
|
++filesize_to_blk=setexpr cnt $filesize + 0x1ff && setexpr cnt $cnt / 0x200
|
|
|
++mmc_read_kernel=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr $part_addr $image_size
|
|
|
++boot_system=run init_modem && part start mmc 0 kernel part_addr && part size mmc 0 kernel part_size && run mmc_read_kernel && bootm
|
|
|
++boot_tftp_firmware=tftpboot $loadaddr $bootfile_firmware && run emmc_write_firmware
|
|
|
++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
|
|
|
++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
|
|
|
++emmc_write_firmware=part start mmc 0 kernel part_addr && run filesize_to_blk && mmc write $loadaddr $part_addr $cnt
|
|
|
++emmc_write_bl2=run filesize_to_blk && test 0x$cnt -le 0x800 && mmc partconf 0 1 1 1 && mmc write $loadaddr 0x0 0x800 ; mmc partconf 0 1 1 0
|
|
|
++emmc_write_fip=part start mmc 0 fip part_addr && part size mmc 0 fip part_size && run filesize_to_blk && test 0x$cnt -le 0x$part_size && mmc write $loadaddr $part_addr $cnt
|
|
|
++init_modem=gpio set 10; gpio set 5; gpio set 9; gpio set 11; sleep 0.1; gpio clear 10; sleep 1
|
|
|
++reset_factory=eraseenv && reset
|
Chris Webb