ar71xx: Add usable, inactive LEDs on OpenMesh devices

OpenMesh devices have often LEDs which are not yet used by OpenWrt. These
should still be available as disabled LEDs in the system configuration for
easier modification.

Signed-off-by: Jaylin Yu <[email protected]>
[[email protected]: Remove LEDs already specified via diag.sh,
 add wifi/status LEDs]
Signed-off-by: Sven Eckelmann <[email protected]>

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -289,18 +289,31 @@ mr18)
 	;;
 mr600)
 	ucidef_set_led_wlan "wlan58" "WLAN58" "$board:green:wlan58" "phy0tpt"
+	ucidef_set_led_default "wps" "WPS" "mr600:blue:wps" "0"
+	;;
+mr600v2)
+	ucidef_set_led_default "wlan24-red" "WLAN 2.4GHz (red)" "mr600:red:wlan24" "0"
+	ucidef_set_led_default "wlan24-yellow" "WLAN 2.4GHz (yellow)" "mr600:yellow:wlan24" "0"
+	ucidef_set_led_wlan "wlan24-green" "WLAN 4GHz (green)" "mr600:green:wlan24" "phy1tpt"
+	ucidef_set_led_default "wlan5-red" "WLAN 5GHz (red)" "mr600:red:wlan58" "0"
+	ucidef_set_led_default "wlan5-yellow" "WLAN 5GHz (yellow)" "mr600:yellow:wlan58" "0"
+	ucidef_set_led_wlan "wlan5-green" "WLAN 5GHz (green)" "mr600:green:wlan58" "phy0tpt"
 	;;
 mr1750|\
 mr1750v2)
 	ucidef_set_led_netdev "lan" "LAN" "mr1750:blue:wan" "eth0"
 	ucidef_set_led_wlan "wlan58" "WLAN58" "mr1750:blue:wlan58" "phy0tpt"
 	ucidef_set_led_wlan "wlan24" "WLAN24" "mr1750:blue:wlan24" "phy1tpt"
+	ucidef_set_led_default "status-red" "Status (red)" "mr1750:red:wifi" "0"
+	ucidef_set_led_default "status-green" "Status (green)" "mr1750:green:wifi" "0"
 	;;
 mr900|\
 mr900v2)
 	ucidef_set_led_netdev "lan" "LAN" "mr900:blue:wan" "eth0"
 	ucidef_set_led_wlan "wlan24" "WLAN24" "mr900:blue:wlan24" "phy0tpt"
 	ucidef_set_led_wlan "wlan58" "WLAN58" "mr900:blue:wlan58" "phy1tpt"
+	ucidef_set_led_default "status-red" "Status (red)" "mr900:red:wifi" "0"
+	ucidef_set_led_default "status-green" "Status (green)" "mr900:green:wifi" "0"
 	;;
 mynet-n600)
 	ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1"
@@ -347,15 +360,29 @@ om2p-hsv3|\
 om2p-lc)
 	ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
 	ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om2p:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om2p:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om2p:green:wifi" "0"
 	;;
 om5p|\
 om5p-an)
 	ucidef_set_led_netdev "port1" "port1" "om5p:blue:wan" "eth0"
 	ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om5p:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5p:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om5p:green:wifi" "0"
 	;;
 om5p-ac)
 	ucidef_set_led_netdev "port1" "port1" "om5pac:blue:lan" "eth0"
 	ucidef_set_led_netdev "port2" "port2" "om5pac:blue:wan" "eth1"
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
+	;;
+om5p-acv2)
+	ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
+	ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
+	ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
 	;;
 omy-g1)
 	ucidef_set_led_wlan "wlan" "WLAN" "omy:green:wlan" "phy0tpt"