|
|
@@ -0,0 +1,221 @@
|
|
|
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
+/* Copyright (c) 2020, Robert Marko <[email protected]> */
|
|
|
+
|
|
|
+#include "qcom-ipq4019.dtsi"
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "MikroTik wAP ac";
|
|
|
+ compatible = "mikrotik,wap-ac";
|
|
|
+
|
|
|
+ memory {
|
|
|
+ device_type = "memory";
|
|
|
+ reg = <0x80000000 0x08000000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ chosen {
|
|
|
+ stdout-path = "serial0:115200n8";
|
|
|
+ };
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &led_user;
|
|
|
+ led-failsafe = &led_user;
|
|
|
+ led-running = &led_user;
|
|
|
+ led-upgrade = &led_user;
|
|
|
+ };
|
|
|
+
|
|
|
+ soc {
|
|
|
+ counter@4a1000 {
|
|
|
+ compatible = "qcom,qca-gcnt";
|
|
|
+ reg = <0x4a1000 0x4>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1949000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1949000 0x100>;
|
|
|
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ess_tcsr@1953000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1953000 0x1000>;
|
|
|
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1957000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1957000 0x100>;
|
|
|
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-switch@c000000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ edma@c080000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ power {
|
|
|
+ label = "blue:power";
|
|
|
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
|
|
+ default-state = "keep";
|
|
|
+ };
|
|
|
+
|
|
|
+ led_user: user {
|
|
|
+ label = "green:user";
|
|
|
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
|
|
+ panic-indicator;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&prng {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&tlmm {
|
|
|
+ serial_pins: serial_pinmux {
|
|
|
+ mux {
|
|
|
+ pins = "gpio60", "gpio61";
|
|
|
+ function = "blsp_uart0";
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ spi_0_pins: spi_0_pinmux {
|
|
|
+ pin {
|
|
|
+ function = "blsp_spi0";
|
|
|
+ pins = "gpio55", "gpio56", "gpio57";
|
|
|
+ drive-strength = <2>;
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+ pin_cs {
|
|
|
+ function = "gpio";
|
|
|
+ pins = "gpio54";
|
|
|
+ drive-strength = <2>;
|
|
|
+ bias-disable;
|
|
|
+ output-high;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp_dma {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&blsp1_spi1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pinctrl-0 = <&spi_0_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
|
|
+
|
|
|
+ flash@0 {
|
|
|
+ reg = <0>;
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ spi-max-frequency = <40000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ label = "Qualcomm";
|
|
|
+ reg = <0x0 0x80000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@80000 {
|
|
|
+ compatible = "mikrotik,routerboot-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+ label = "RouterBoot";
|
|
|
+ reg = <0x80000 0x80000>;
|
|
|
+
|
|
|
+ hard_config {
|
|
|
+ read-only;
|
|
|
+ size = <0x2000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ dtb_config {
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ soft_config {
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@100000 {
|
|
|
+ compatible = "mikrotik,minor";
|
|
|
+ label = "firmware";
|
|
|
+ reg = <0x100000 0xf00000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp1_uart1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ pinctrl-0 = <&serial_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+};
|
|
|
+
|
|
|
+&cryptobam {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&crypto {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&watchdog {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&mdio {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&gmac0 {
|
|
|
+ qcom,phy_mdio_addr = <4>;
|
|
|
+ qcom,poll_required = <1>;
|
|
|
+ qcom,forced_speed = <1000>;
|
|
|
+ qcom,forced_duplex = <1>;
|
|
|
+ vlan_tag = <2 0x20>;
|
|
|
+};
|
|
|
+
|
|
|
+&gmac1 {
|
|
|
+ qcom,phy_mdio_addr = <3>;
|
|
|
+ vlan_tag = <1 0x10>;
|
|
|
+};
|
|
|
+
|
|
|
+&wifi0 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
|
|
|
+};
|
|
|
+
|
|
|
+&wifi1 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
|
|
|
+};
|
Mark Mentovai