ar71xx: fix ap152 support

- ethernet gigabit pll
- switch configuration
- sysupgrade

Signed-off-by: Roman Yeryomin <[email protected]>

SVN-Revision: 48187

target/linux/ar71xx/base-files/etc/board.d/02_network

@@ -23,6 +23,7 @@ ubnt-unifi-outdoor)
 	;;
 
 ap132 |\
+ap152 |\
 wlr8100)
 	ucidef_add_switch "switch0" \
 		"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -184,6 +184,7 @@ platform_check_image() {
 	ap136-020 | \
 	ap135-020 | \
 	ap147-010 | \
+	ap152 | \
 	ap96 | \
 	bxu2000n-2-a1 | \
 	db120 | \

target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c

@@ -132,7 +132,6 @@ static void __init ap152_setup(void)
 	ath79_eth0_data.duplex = DUPLEX_FULL;
 	ath79_eth0_data.phy_mask = BIT(0);
 	ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-	ath79_eth0_pll_data.pll_1000 = 0x06000000;
 
 	ath79_register_eth(0);
 }