ipq40xx: Lyra: update RGB LED-Controller node for 5.10+

Add the reg and color property to each channel node. This
update is to accommodate the multicolor framework.

Refer to:
<https://lore.kernel.org/all/[email protected]>
<https://lore.kernel.org/all/[email protected]>

Note:

There is only a single extremely bright RGB-LED.
The RGB-color channels (i.e.: blue-0, blue-1 and blue-2)
are running in parallel to increase the current delivery
beyond what a single PWM-output on the LED controller
could do.

BugLink: https://github.com/openwrt/openwrt/issues/9851
Reported-By: Thomas Bøge <[email protected]>
Tested-By: Thomas Bøge <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>

target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration

@@ -3,6 +3,9 @@
 board=$(board_name)
 
 case "$board" in
+asus,map-ac2200)
+	migrate_leds ':chan=-'
+	;;
 engenius,emr3500)
 	migrate_leds "emr3500:="
 	;;

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts

@@ -4,6 +4,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/soc/qcom,tcsr.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "ASUS Lyra MAP-AC2200";
@@ -252,69 +253,96 @@
 		/* 9-channel RGB LED controller */
 		compatible = "national,lp5523";
 		reg = <0x32>;
-		clock-mode = [01];
-
-		led_blue0: blue0 {
-			chan-name = "blue0";
-			label = "blue:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * There is only one single extremely bright RGB-LED.
+		 * The RGB-color channels are running in parallel to
+		 * increase the current delivery capabilities beyond
+		 * what a single PWM-output of the controller can do.
+		 */
+
+		led_blue0: led@0 {
+			chan-name = "blue-0";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <0>;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <0>;
 		};
 
-		blue1 {
-			chan-name = "blue1";
-			label = "blue:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
+		led@1 {
+			chan-name = "blue-1";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <1>;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <1>;
 		};
 
-		blue2 {
-			chan-name = "blue2";
-			label = "blue:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
+		led@2 {
+			chan-name = "blue-2";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function-enumerator = <2>;
 		};
 
-		led_green0: green0 {
-			chan-name = "green0";
-			label = "green:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
+		led_green0: led@3 {
+			chan-name = "green-0";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <0>;
 		};
 
-		green1 {
-			chan-name = "green1";
-			label = "green:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
+		led@4 {
+			chan-name = "green-1";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <1>;
 		};
 
-		green2 {
-			chan-name = "green2";
-			label = "green:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
+		led@5 {
+			chan-name = "green-2";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			function-enumerator = <2>;
 		};
 
-		led_red0: red0 {
-			chan-name = "red0";
-			label = "red:chan0";
-			led-cur = [fa];
-			max-cur = [ff];
+		led_red0: led@6 {
+			chan-name = "red-0";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <6>;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <0>;
 		};
 
-		red1 {
-			chan-name = "red1";
-			label = "red:chan1";
-			led-cur = [fa];
-			max-cur = [ff];
+		led@7 {
+			chan-name = "red-1";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <7>;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <1>;
 		};
 
-		red2 {
-			chan-name = "red2";
-			label = "red:chan2";
-			led-cur = [fa];
-			max-cur = [ff];
+		led@8 {
+			chan-name = "red-2";
+			led-cur = /bits/ 8 <0xfa>;
+			max-cur = /bits/ 8 <0xff>;
+			reg = <8>;
+			color = <LED_COLOR_ID_RED>;
+			function-enumerator = <2>;
 		};
 	};
 };