|
|
@@ -0,0 +1,769 @@
|
|
|
+From ee219017ddb50be14c60d3cbe3e51ac0b2008d40 Mon Sep 17 00:00:00 2001
|
|
|
+From: Chukun Pan <[email protected]>
|
|
|
+Date: Sun, 28 Apr 2024 20:36:18 +0800
|
|
|
+Subject: [PATCH] arm64: dts: rockchip: Add Radxa ROCK 3C
|
|
|
+
|
|
|
+The Radxa ROCK 3C is a development board with the
|
|
|
+Rockchip RK3566 SoC. It has the following features:
|
|
|
+
|
|
|
+- 1/2/4GB LPDDR4
|
|
|
+- 1x HDMI Type A
|
|
|
+- 1x PCIE 2.0 slot
|
|
|
+- 1x FAN connector
|
|
|
+- 3.5mm jack with mic
|
|
|
+- 1GbE RTL8211F Ethernet
|
|
|
+- 1x USB 3.0, 3x USB 2.0
|
|
|
+- 40-pin expansion header
|
|
|
+- MicroSD card/eMMC socket
|
|
|
+- 16MB SPI NOR (gd25lq128d)
|
|
|
+- AP6256 or AIC8800 WiFi/BT
|
|
|
+
|
|
|
+Signed-off-by: Chukun Pan <[email protected]>
|
|
|
+Link: https://lore.kernel.org/r/[email protected]
|
|
|
+[dropped rk809-sound and not specified pmic sound properties]
|
|
|
+Signed-off-by: Heiko Stuebner <[email protected]>
|
|
|
+---
|
|
|
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
|
+ .../boot/dts/rockchip/rk3566-rock-3c.dts | 726 ++++++++++++++++++
|
|
|
+ 2 files changed, 727 insertions(+)
|
|
|
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
|
|
+
|
|
|
+--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
|
++++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
|
+@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-qu
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
|
|
|
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-rock-3c.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb
|
|
|
+--- /dev/null
|
|
|
++++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
|
|
|
+@@ -0,0 +1,726 @@
|
|
|
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
++
|
|
|
++/dts-v1/;
|
|
|
++#include <dt-bindings/gpio/gpio.h>
|
|
|
++#include <dt-bindings/leds/common.h>
|
|
|
++#include <dt-bindings/pinctrl/rockchip.h>
|
|
|
++#include <dt-bindings/soc/rockchip,vop2.h>
|
|
|
++#include "rk3566.dtsi"
|
|
|
++
|
|
|
++/ {
|
|
|
++ model = "Radxa ROCK 3C";
|
|
|
++ compatible = "radxa,rock-3c", "rockchip,rk3566";
|
|
|
++
|
|
|
++ aliases {
|
|
|
++ ethernet0 = &gmac1;
|
|
|
++ mmc0 = &sdhci;
|
|
|
++ mmc1 = &sdmmc0;
|
|
|
++ mmc2 = &sdmmc1;
|
|
|
++ };
|
|
|
++
|
|
|
++ chosen: chosen {
|
|
|
++ stdout-path = "serial2:1500000n8";
|
|
|
++ };
|
|
|
++
|
|
|
++ gmac1_clkin: external-gmac1-clock {
|
|
|
++ compatible = "fixed-clock";
|
|
|
++ clock-frequency = <125000000>;
|
|
|
++ clock-output-names = "gmac1_clkin";
|
|
|
++ #clock-cells = <0>;
|
|
|
++ };
|
|
|
++
|
|
|
++ hdmi-con {
|
|
|
++ compatible = "hdmi-connector";
|
|
|
++ type = "a";
|
|
|
++
|
|
|
++ port {
|
|
|
++ hdmi_con_in: endpoint {
|
|
|
++ remote-endpoint = <&hdmi_out_con>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ leds {
|
|
|
++ compatible = "gpio-leds";
|
|
|
++
|
|
|
++ led-0 {
|
|
|
++ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
|
|
++ function = LED_FUNCTION_HEARTBEAT;
|
|
|
++ color = <LED_COLOR_ID_BLUE>;
|
|
|
++ linux,default-trigger = "heartbeat";
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&user_led2>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ sdio_pwrseq: sdio-pwrseq {
|
|
|
++ compatible = "mmc-pwrseq-simple";
|
|
|
++ clocks = <&rk809 1>;
|
|
|
++ clock-names = "ext_clock";
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&wifi_reg_on_h>;
|
|
|
++ post-power-on-delay-ms = <100>;
|
|
|
++ power-off-delay-us = <5000000>;
|
|
|
++ reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc5v_dcin: vcc5v-dcin-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vcc5v_dcin";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <5000000>;
|
|
|
++ regulator-max-microvolt = <5000000>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc3v3_pcie: vcc3v3-pcie-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ enable-active-high;
|
|
|
++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&pcie_pwr_en>;
|
|
|
++ regulator-name = "vcc3v3_pcie";
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ vin-supply = <&vcc3v3_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc3v3_sys: vcc3v3-sys-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vcc3v3_sys";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc5v0_sys: vcc5v0-sys-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vcc5v0_sys";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <5000000>;
|
|
|
++ regulator-max-microvolt = <5000000>;
|
|
|
++ vin-supply = <&vcc5v_dcin>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc5v0_usb30_host: vcc5v0-usb30-host-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ enable-active-high;
|
|
|
++ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&vcc5v0_usb30_host_en>;
|
|
|
++ regulator-name = "vcc5v0_usb30_host";
|
|
|
++ regulator-min-microvolt = <5000000>;
|
|
|
++ regulator-max-microvolt = <5000000>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ enable-active-high;
|
|
|
++ gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
|
|
++ regulator-name = "vcc5v0_usb_otg";
|
|
|
++ regulator-min-microvolt = <5000000>;
|
|
|
++ regulator-max-microvolt = <5000000>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_cam: vcc-cam-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ enable-active-high;
|
|
|
++ gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&vcc_cam_en>;
|
|
|
++ regulator-name = "vcc_cam";
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ vin-supply = <&vcc3v3_sys>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_mipi: vcc-mipi-regulator {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ enable-active-high;
|
|
|
++ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&vcc_mipi_en>;
|
|
|
++ regulator-name = "vcc_mipi";
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ vin-supply = <&vcc3v3_sys>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&combphy1 {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&combphy2 {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&cpu0 {
|
|
|
++ cpu-supply = <&vdd_cpu>;
|
|
|
++};
|
|
|
++
|
|
|
++&cpu1 {
|
|
|
++ cpu-supply = <&vdd_cpu>;
|
|
|
++};
|
|
|
++
|
|
|
++&cpu2 {
|
|
|
++ cpu-supply = <&vdd_cpu>;
|
|
|
++};
|
|
|
++
|
|
|
++&cpu3 {
|
|
|
++ cpu-supply = <&vdd_cpu>;
|
|
|
++};
|
|
|
++
|
|
|
++&gmac1 {
|
|
|
++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
|
|
++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
|
|
++ clock_in_out = "input";
|
|
|
++ phy-handle = <&rgmii_phy1>;
|
|
|
++ phy-mode = "rgmii-id";
|
|
|
++ phy-supply = <&vcc_3v3>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&gmac1m1_miim
|
|
|
++ &gmac1m1_tx_bus2
|
|
|
++ &gmac1m1_rx_bus2
|
|
|
++ &gmac1m1_rgmii_clk
|
|
|
++ &gmac1m1_rgmii_bus
|
|
|
++ &gmac1m1_clkinout>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&gpu {
|
|
|
++ mali-supply = <&vdd_gpu>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&hdmi {
|
|
|
++ avdd-0v9-supply = <&vdda0v9_image>;
|
|
|
++ avdd-1v8-supply = <&vcca1v8_image>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&hdmi_in {
|
|
|
++ hdmi_in_vp0: endpoint {
|
|
|
++ remote-endpoint = <&vp0_out_hdmi>;
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&hdmi_out {
|
|
|
++ hdmi_out_con: endpoint {
|
|
|
++ remote-endpoint = <&hdmi_con_in>;
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&hdmi_sound {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&i2c0 {
|
|
|
++ status = "okay";
|
|
|
++
|
|
|
++ vdd_cpu: regulator@1c {
|
|
|
++ compatible = "tcs,tcs4525";
|
|
|
++ reg = <0x1c>;
|
|
|
++ fcs,suspend-voltage-selector = <1>;
|
|
|
++ regulator-name = "vdd_cpu";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <800000>;
|
|
|
++ regulator-max-microvolt = <1150000>;
|
|
|
++ regulator-ramp-delay = <2300>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ rk809: pmic@20 {
|
|
|
++ compatible = "rockchip,rk809";
|
|
|
++ reg = <0x20>;
|
|
|
++ interrupt-parent = <&gpio0>;
|
|
|
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
|
++ clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
|
|
|
++ system-power-controller;
|
|
|
++ vcc1-supply = <&vcc3v3_sys>;
|
|
|
++ vcc2-supply = <&vcc3v3_sys>;
|
|
|
++ vcc3-supply = <&vcc3v3_sys>;
|
|
|
++ vcc4-supply = <&vcc3v3_sys>;
|
|
|
++ vcc5-supply = <&vcc3v3_sys>;
|
|
|
++ vcc6-supply = <&vcc3v3_sys>;
|
|
|
++ vcc7-supply = <&vcc3v3_sys>;
|
|
|
++ vcc8-supply = <&vcc3v3_sys>;
|
|
|
++ vcc9-supply = <&vcc3v3_sys>;
|
|
|
++ wakeup-source;
|
|
|
++ #clock-cells = <1>;
|
|
|
++
|
|
|
++ regulators {
|
|
|
++ vdd_logic: DCDC_REG1 {
|
|
|
++ regulator-name = "vdd_logic";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-initial-mode = <0x2>;
|
|
|
++ regulator-min-microvolt = <500000>;
|
|
|
++ regulator-max-microvolt = <1350000>;
|
|
|
++ regulator-ramp-delay = <6001>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ regulator-suspend-microvolt = <900000>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vdd_gpu: DCDC_REG2 {
|
|
|
++ regulator-name = "vdd_gpu";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-initial-mode = <0x2>;
|
|
|
++ regulator-min-microvolt = <500000>;
|
|
|
++ regulator-max-microvolt = <1350000>;
|
|
|
++ regulator-ramp-delay = <6001>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ regulator-suspend-microvolt = <900000>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_ddr: DCDC_REG3 {
|
|
|
++ regulator-name = "vcc_ddr";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-initial-mode = <0x2>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-on-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vdd_npu: DCDC_REG4 {
|
|
|
++ regulator-name = "vdd_npu";
|
|
|
++ regulator-initial-mode = <0x2>;
|
|
|
++ regulator-min-microvolt = <500000>;
|
|
|
++ regulator-max-microvolt = <1350000>;
|
|
|
++ regulator-ramp-delay = <6001>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_1v8: DCDC_REG5 {
|
|
|
++ regulator-name = "vcc_1v8";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
++ regulator-max-microvolt = <1800000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vdda0v9_image: LDO_REG1 {
|
|
|
++ regulator-name = "vdda0v9_image";
|
|
|
++ regulator-min-microvolt = <900000>;
|
|
|
++ regulator-max-microvolt = <900000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vdda_0v9: LDO_REG2 {
|
|
|
++ regulator-name = "vdda_0v9";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <900000>;
|
|
|
++ regulator-max-microvolt = <900000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vdda0v9_pmu: LDO_REG3 {
|
|
|
++ regulator-name = "vdda0v9_pmu";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <900000>;
|
|
|
++ regulator-max-microvolt = <900000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-on-in-suspend;
|
|
|
++ regulator-suspend-microvolt = <900000>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vccio_acodec: LDO_REG4 {
|
|
|
++ regulator-name = "vccio_acodec";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vccio_sd: LDO_REG5 {
|
|
|
++ regulator-name = "vccio_sd";
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc3v3_pmu: LDO_REG6 {
|
|
|
++ regulator-name = "vcc3v3_pmu";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-on-in-suspend;
|
|
|
++ regulator-suspend-microvolt = <3300000>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcca_1v8: LDO_REG7 {
|
|
|
++ regulator-name = "vcca_1v8";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
++ regulator-max-microvolt = <1800000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcca1v8_pmu: LDO_REG8 {
|
|
|
++ regulator-name = "vcca1v8_pmu";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
++ regulator-max-microvolt = <1800000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-on-in-suspend;
|
|
|
++ regulator-suspend-microvolt = <1800000>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcca1v8_image: LDO_REG9 {
|
|
|
++ regulator-name = "vcca1v8_image";
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
++ regulator-max-microvolt = <1800000>;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_3v3: SWITCH_REG1 {
|
|
|
++ regulator-name = "vcc_3v3";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc3v3_sd: SWITCH_REG2 {
|
|
|
++ regulator-name = "vcc3v3_sd";
|
|
|
++
|
|
|
++ regulator-state-mem {
|
|
|
++ regulator-off-in-suspend;
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ eeprom: eeprom@50 {
|
|
|
++ compatible = "belling,bl24c16a", "atmel,24c16";
|
|
|
++ reg = <0x50>;
|
|
|
++ pagesize = <16>;
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&i2s0_8ch {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&i2s1_8ch {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
|
|
++ rockchip,trcm-sync-tx-only;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&mdio1 {
|
|
|
++ rgmii_phy1: ethernet-phy@1 {
|
|
|
++ compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
++ reg = <0x1>;
|
|
|
++ reset-assert-us = <20000>;
|
|
|
++ reset-deassert-us = <100000>;
|
|
|
++ reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&pcie2x1 {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&pcie_reset_h>;
|
|
|
++ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
|
|
++ vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&pinctrl {
|
|
|
++ bluetooth {
|
|
|
++ bt_reg_on_h: bt-reg-on-h {
|
|
|
++ rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ bt_wake_host_h: bt-wake-host-h {
|
|
|
++ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ bt_host_wake_h: bt-host-wake-h {
|
|
|
++ rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ cam {
|
|
|
++ vcc_cam_en: vcc_cam_en {
|
|
|
++ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ display {
|
|
|
++ vcc_mipi_en: vcc_mipi_en {
|
|
|
++ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ leds {
|
|
|
++ user_led2: user-led2 {
|
|
|
++ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ pcie {
|
|
|
++ pcie_pwr_en: pcie-pwr-en {
|
|
|
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ pcie_reset_h: pcie-reset-h {
|
|
|
++ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ pmic {
|
|
|
++ pmic_int_l: pmic-int-l {
|
|
|
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ usb {
|
|
|
++ vcc5v0_usb30_host_en: vcc5v0-usb30-host-en {
|
|
|
++ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
|
|
++ rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ wifi {
|
|
|
++ wifi_host_wake_h: wifi-host-wake-h {
|
|
|
++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ wifi_reg_on_h: wifi-reg-on-h {
|
|
|
++ rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&pmu_io_domains {
|
|
|
++ pmuio1-supply = <&vcc3v3_pmu>;
|
|
|
++ pmuio2-supply = <&vcca1v8_pmu>;
|
|
|
++ vccio1-supply = <&vccio_acodec>;
|
|
|
++ vccio2-supply = <&vcc_1v8>;
|
|
|
++ vccio3-supply = <&vccio_sd>;
|
|
|
++ vccio4-supply = <&vcca1v8_pmu>;
|
|
|
++ vccio5-supply = <&vcc_3v3>;
|
|
|
++ vccio6-supply = <&vcc_3v3>;
|
|
|
++ vccio7-supply = <&vcc_3v3>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&saradc {
|
|
|
++ vref-supply = <&vcca_1v8>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&sdhci {
|
|
|
++ bus-width = <8>;
|
|
|
++ max-frequency = <200000000>;
|
|
|
++ mmc-hs200-1_8v;
|
|
|
++ non-removable;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
|
|
++ vmmc-supply = <&vcc_3v3>;
|
|
|
++ vqmmc-supply = <&vcc_1v8>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&sdmmc0 {
|
|
|
++ bus-width = <4>;
|
|
|
++ cap-sd-highspeed;
|
|
|
++ disable-wp;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
|
++ sd-uhs-sdr50;
|
|
|
++ vmmc-supply = <&vcc3v3_sys>;
|
|
|
++ vqmmc-supply = <&vccio_sd>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&sdmmc1 {
|
|
|
++ bus-width = <4>;
|
|
|
++ cap-sd-highspeed;
|
|
|
++ cap-sdio-irq;
|
|
|
++ keep-power-in-suspend;
|
|
|
++ mmc-pwrseq = <&sdio_pwrseq>;
|
|
|
++ non-removable;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
|
|
|
++ sd-uhs-sdr104;
|
|
|
++ vmmc-supply = <&vcc3v3_sys>;
|
|
|
++ vqmmc-supply = <&vcca1v8_pmu>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&sfc {
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <0>;
|
|
|
++ status = "okay";
|
|
|
++
|
|
|
++ flash@0 {
|
|
|
++ compatible = "jedec,spi-nor";
|
|
|
++ reg = <0x0>;
|
|
|
++ spi-max-frequency = <120000000>;
|
|
|
++ spi-rx-bus-width = <4>;
|
|
|
++ spi-tx-bus-width = <1>;
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&tsadc {
|
|
|
++ rockchip,hw-tshut-mode = <1>;
|
|
|
++ rockchip,hw-tshut-polarity = <0>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&uart1 {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&uart2 {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host0_ehci {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host0_ohci {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host0_xhci {
|
|
|
++ dr_mode = "host";
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host1_ehci {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host1_ohci {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host1_xhci {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy0 {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy0_host {
|
|
|
++ phy-supply = <&vcc5v0_usb30_host>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy0_otg {
|
|
|
++ phy-supply = <&vcc5v0_usb_otg>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy1 {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy1_host {
|
|
|
++ phy-supply = <&vcc5v0_usb30_host>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy1_otg {
|
|
|
++ phy-supply = <&vcc5v0_usb30_host>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&vop {
|
|
|
++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
|
++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&vop_mmu {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&vp0 {
|
|
|
++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
|
++ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
|
++ remote-endpoint = <&hdmi_in_vp0>;
|
|
|
++ };
|
|
|
++};
|
FUKAUMI Naoki