kirkwood: add D-Link DNS-320L support

Dual-slot NAS based on Marvell Kirkwood.

Specifications:
 - Marvell 88F6702 @1GHz
 - 256Mb RAM
 - 128Mb NAND
 - 1x GbE LAN (Marvell 88E1318R)
 - 1x USB 2.0
 - 2x SATA
 - Weltrend WT69P3 ("supervisor" MCU chip)
 - Serial on J2 (115200,8n1)
 - Newer bootROM so kwboot-ing via serial is possible

Notes:
 - The Weltrend MCU is controlled by the package added in utils/dns320l-mcu.
 - The original MAC address is stored in the "mini firmware" image's first
   17 bytes.
 - Compared to the original MTD layout, the uImage+rootfs are now stored in
   a common ubi partition.

Installation:
1. Serial console
 - Connect your levelshifter to the serial console
   on J2 (refer to the wiki page for pinout)
2. Update u-boot
 - Download the u-boot.kwb image for the device
 - Powercycle the NAS
 - Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p"
 - Connect to the serial console with minicom
 - tftp 0x0800000 u-boot-dns320l/u-boot.kwb
   (Please note that "PHY reset timed out" seems to be customary
    on kirkwood devices, the egiga0 interface works regardless.)
 - nand erase 0x0 100000
 - nand write 0x0800000 0x0 0x100000
 - reset
3. Install OpenWrt
 - Boot up the initramfs image
 - tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000
 - Download the sysupgrade image and perform sysupgrade

Signed-off-by: Zoltan HERPAI <[email protected]>
Reviewed-by: Pawel Dembicki <[email protected]>

package/boot/uboot-envtools/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=uboot-envtools
 PKG_DISTNAME:=u-boot
 PKG_VERSION:=2024.01
-PKG_RELEASE:=2
+PKG_RELEASE:=3
 
 PKG_SOURCE:=$(PKG_DISTNAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:= \

package/boot/uboot-envtools/files/kirkwood

@@ -15,6 +15,7 @@ case "$board" in
 checkpoint,l-50|\
 cloudengines,pogoe02|\
 cloudengines,pogoplugv4|\
+dlink,dns320l|\
 globalscale,sheevaplug|\
 iom,ix2-200|\
 iom,ix4-200d|\

package/boot/uboot-kirkwood/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_VERSION:=2020.04
-PKG_RELEASE:=9
+PKG_RELEASE:=10
 
 PKG_HASH:=fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372
 
@@ -20,6 +20,11 @@ define U-Boot/Default
   BUILD_SUBTARGET:=generic
 endef
 
+define U-Boot/dns320l
+  NAME:=D-Link DNS-320L
+  BUILD_DEVICES:=dlink_dns320l
+endef
+
 define U-Boot/dockstar
   NAME:=Seagate DockStar
   BUILD_DEVICES:=seagate_dockstar
@@ -106,6 +111,7 @@ define U-Boot/sheevaplug
 endef
 
 UBOOT_TARGETS := \
+	dns320l \
 	dockstar dockstar_second_stage \
 	goflexhome \
 	ib62x0 ib62x0_second_stage \

package/boot/uboot-kirkwood/patches/190-dns-320l.patch

@@ -0,0 +1,387 @@
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig
+@@ -28,6 +28,9 @@ config TARGET_POGO_E02
+ config TARGET_POGOPLUGV4
+     bool "Pogoplug V4 Board"
+ 
++config TARGET_DNS320L
++	bool "dns320l Board"
++
+ config TARGET_DNS325
+ 	bool "dns325 Board"
+ 
+@@ -93,6 +96,7 @@ source "board/Marvell/sheevaplug/Kconfig
+ source "board/buffalo/lsxl/Kconfig"
+ source "board/cloudengines/pogo_e02/Kconfig"
+ source "board/cloudengines/pogoplugv4/Kconfig"
++source "board/d-link/dns320l/Kconfig"
+ source "board/d-link/dns325/Kconfig"
+ source "board/iomega/iconnect/Kconfig"
+ source "board/keymile/Kconfig"
+--- /dev/null
++++ b/board/d-link/dns320l/dns320l.c
+@@ -0,0 +1,113 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Copyright (C) 2015
++ * Gerald Kerma <[email protected]>
++ * Tony Dinh <[email protected]>
++ */
++
++#include <common.h>
++#include <miiphy.h>
++#include <net.h>
++#include <asm/arch/cpu.h>
++#include <asm/arch/soc.h>
++#include <asm/arch/mpp.h>
++#include <asm/arch/gpio.h>
++#include <asm/io.h>
++#include "dns320l.h"
++
++DECLARE_GLOBAL_DATA_PTR;
++
++int board_early_init_f(void)
++{
++	/*
++	 * default gpio configuration
++	 * There are maximum 64 gpios controlled through 2 sets of registers
++	 * the below configuration configures mainly initial LED status
++	 */
++	mvebu_config_gpio(DNS320L_OE_VAL_LOW, DNS320L_OE_VAL_HIGH,
++			  DNS320L_OE_LOW, DNS320L_OE_HIGH);
++
++	/* (all LEDs & power off active high) */
++	/* Multi-Purpose Pins Functionality configuration */
++	static const u32 kwmpp_config[] = {
++		MPP0_NF_IO2,
++		MPP1_NF_IO3,
++		MPP2_NF_IO4,
++		MPP3_NF_IO5,
++		MPP4_NF_IO6,
++		MPP5_NF_IO7,
++		MPP6_SYSRST_OUTn,
++		MPP7_GPO,
++		MPP8_TW_SDA,
++		MPP9_TW_SCK,
++		MPP10_UART0_TXD,
++		MPP11_UART0_RXD,
++		MPP12_GPO,
++		MPP13_GPIO,
++		MPP14_GPIO,
++		MPP15_GPIO,
++		MPP16_GPIO,
++		MPP17_GPIO,
++		MPP18_NF_IO0,
++		MPP19_NF_IO1,
++		MPP20_SATA1_ACTn,	/* sata1(left) status led */
++		MPP21_SATA0_ACTn,	/* sata0(right) status led */
++		MPP22_GPIO,
++		MPP23_GPIO,
++		MPP24_GPIO,
++		MPP25_GPIO,
++		MPP26_GPIO,
++		MPP27_GPIO,
++		MPP28_GPIO,
++		MPP29_GPIO,
++		MPP30_GPIO,
++		MPP31_GPIO,
++		MPP32_GPIO,
++		0
++	};
++	kirkwood_mpp_conf(kwmpp_config, NULL);
++
++	kw_gpio_set_value(DNS320L_GPIO_SATA_EN , 1);
++
++	return 0;
++}
++
++int board_init(void)
++{
++	/* address of boot parameters */
++	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
++
++	return 0;
++}
++
++#ifdef CONFIG_RESET_PHY_R
++/* Configure and initialize PHY */
++void reset_phy(void)
++{
++	u16 reg;
++	u16 phyaddr;
++	char *name = "egiga0";
++
++	if (miiphy_set_current_dev(name))
++		return;
++
++	/* read PHY dev address */
++	if (miiphy_read(name, 0xee, 0xee, (u16 *) &phyaddr)) {
++		printf("could not read PHY dev address\n");
++		return;
++	}
++
++	/* set RGMII delay */
++	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG);
++	miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, &reg);
++	reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL);
++	miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg);
++	miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0);
++
++	/* reset PHY */
++	if (miiphy_reset(name, phyaddr))
++		return;
++
++	printf("MV88E1318 PHY initialized on %s\n", name);
++}
++#endif /* CONFIG_RESET_PHY_R */
+--- /dev/null
++++ b/board/d-link/dns320l/dns320l.h
+@@ -0,0 +1,39 @@
++/* SPDX-License-Identifier: GPL-2.0+ */
++/*
++ * Copyright (C) 2011
++ * Stefan Herbrechtsmeier <[email protected]>
++ *
++ * Based on Kirkwood support:
++ * (C) Copyright 2009
++ * Marvell Semiconductor <www.marvell.com>
++ * Written-by: Prafulla Wadaskar <[email protected]>
++ */
++
++#ifndef __DNS320L_H
++#define __DNS320L_H
++
++/* GPIO configuration */
++#define DNS320L_GPIO_SATA_EN	24
++#define HDD_L_GREEN_LED		(1 << 22)
++#define HDD_R_GREEN_LED		(1 << 23)
++#define USB_BLUE_LED		(1 << 25)
++#define USB_ORANGE_LED		(1 << 26)
++
++#define DNS320L_OE_LOW		(~(HDD_L_GREEN_LED | HDD_R_GREEN_LED | \
++                                   USB_BLUE_LED | USB_ORANGE_LED))
++#define DNS320L_OE_VAL_LOW	(0)
++
++/* high GPIO's */
++#define WATCHDOG_SIGNAL		(1 << 14)
++
++#define DNS320L_OE_HIGH		(~(WATCHDOG_SIGNAL))
++#define DNS320L_OE_VAL_HIGH	((WATCHDOG_SIGNAL))
++
++/* PHY related */
++#define MV88E1318_PGADR_REG	22
++#define MV88E1318_MAC_CTRL_PG	2
++#define MV88E1318_MAC_CTRL_REG	21
++#define MV88E1318_RGMII_TX_CTRL	(1 << 4)
++#define MV88E1318_RGMII_RX_CTRL	(1 << 5)
++
++#endif /* __DNS320L_H */
+--- /dev/null
++++ b/board/d-link/dns320l/Kconfig
+@@ -0,0 +1,18 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# Copyright (C) 2015
++# Gerald Kerma <[email protected]>
++# Tony Dinh <[email protected]>
++
++if TARGET_DNS320L
++
++config SYS_BOARD
++	default "dns320l"
++
++config SYS_VENDOR
++	default "d-link"
++	
++config SYS_CONFIG_NAME
++	default "dns320l"
++
++endif
+--- /dev/null
++++ b/board/d-link/dns320l/kwbimage.cfg
+@@ -0,0 +1,41 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# Copyright (C) 2015
++# Gerald Kerma <[email protected]>
++# Tony Dinh <[email protected]>
++# Refer to doc/README.kwbimage for more details about how-to
++# configure and create kirkwood boot images.
++#
++
++# Boot Media configurations
++BOOT_FROM       nand
++NAND_ECC_MODE   default
++NAND_PAGE_SIZE  0x0800
++
++# Configure RGMII-0 interface pad voltage to 1.8V
++DATA 0xFFD100e0 0x1b1b1b9b
++
++DATA 0xFFD01400 0x43010c30
++DATA 0xFFD01404 0x39543000
++DATA 0xFFD01408 0x22125451
++DATA 0xFFD0140C 0x00000833
++DATA 0xFFD01410 0x0000000C
++DATA 0xFFD01414 0x00000000
++DATA 0xFFD01418 0x00000000
++DATA 0xFFD0141C 0x00000652
++DATA 0xFFD01420 0x00000004
++DATA 0xFFD01424 0x0000F17F
++DATA 0xFFD01428 0x00085520
++DATA 0xFFD0147c 0x00008552
++DATA 0xFFD01504 0x0FFFFFF1
++DATA 0xFFD01508 0x10000000
++DATA 0xFFD0150C 0x00000000
++DATA 0xFFD01514 0x00000000
++DATA 0xFFD0151C 0x00000000
++DATA 0xFFD01494 0x00010000
++DATA 0xFFD01498 0x00000000
++DATA 0xFFD0149C 0x0000E403
++DATA 0xFFD01480 0x00000001
++DATA 0xFFD20134 0x66666666
++DATA 0xFFD20138 0x66666666
++DATA 0x0 0x0
+--- /dev/null
++++ b/board/d-link/dns320l/MAINTAINERS
+@@ -0,0 +1,8 @@
++NSA310S BOARD
++M:	Gerald Kerma <[email protected]>
++M:	Tony Dinh <[email protected]>
++M:	Luka Perkov <[email protected]>
++S:	Maintained
++F:	board/d-link/dns320l/
++F:	include/configs/dns320l.h
++F:	configs/dns320l_defconfig
+--- /dev/null
++++ b/board/d-link/dns320l/Makefile
+@@ -0,0 +1,7 @@
++# SPDX-License-Identifier: GPL-2.0+
++#
++# Copyright (C) 2015
++# Gerald Kerma <[email protected]>
++# Tony Dinh <[email protected]>
++
++obj-y	:= dns320l.o
+--- /dev/null
++++ b/configs/dns320l_defconfig
+@@ -0,0 +1,48 @@
++CONFIG_ARM=y
++CONFIG_SYS_DCACHE_OFF=y
++CONFIG_ARCH_CPU_INIT=y
++CONFIG_KIRKWOOD=y
++CONFIG_SYS_TEXT_BASE=0x600000
++CONFIG_TARGET_DNS320L=y
++CONFIG_ENV_SIZE=0x20000
++CONFIG_ENV_OFFSET=0x100000
++CONFIG_NR_DRAM_BANKS=2
++CONFIG_BOOTDELAY=3
++CONFIG_USE_PREBOOT=y
++# CONFIG_DISPLAY_BOARDINFO is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_SYS_PROMPT="dns320l => "
++CONFIG_CMD_BOOTZ=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_IDE=y
++CONFIG_CMD_NAND=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_DHCP=y
++CONFIG_CMD_MII=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_EXT2=y
++CONFIG_CMD_FAT=y
++CONFIG_CMD_JFFS2=y
++CONFIG_CMD_MTDPARTS=y
++CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0x100000@0x0(uboot),0x20000@0x100000(ubootenv),0x6de0000@0x120000(ubi),0xa00000@0x6f00000(mini),0x500000@0x7900000(config),0x200000@0x7e00000(my-dlink)"
++CONFIG_CMD_UBI=y
++CONFIG_ISO_PARTITION=y
++CONFIG_ENV_IS_IN_NAND=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++CONFIG_MVSATA_IDE=y
++# CONFIG_MMC is not set
++CONFIG_MTD=y
++CONFIG_MTD_RAW_NAND=y
++CONFIG_MVGBE=y
++CONFIG_MII=y
++CONFIG_SYS_NS16550=y
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_STORAGE=y
++CONFIG_FIT=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_LZMA=y
++CONFIG_LZO=y
++CONFIG_OF_LIBFDT=y
++CONFIG_NET_RANDOM_ETHADDR=y
+--- /dev/null
++++ b/include/configs/dns320l.h
+@@ -0,0 +1,69 @@
++/* SPDX-License-Identifier: GPL-2.0+ */
++/*
++ * Copyright (C) 2015
++ * Gerald Kerma <[email protected]>
++ * Tony Dinh <[email protected]>
++ * Luka Perkov <[email protected]>
++ */
++
++#ifndef _CONFIG_DNS320L_H
++#define _CONFIG_DNS320L_H
++
++/* high level configuration options */
++#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
++#define CONFIG_KW88F6192		1	/* SOC Name */
++#define CONFIG_KW88F6702		1	/* SOC Name */
++#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
++
++/* compression configuration */
++#define CONFIG_BZIP2
++
++/* commands configuration */
++
++/*
++ * mv-common.h should be defined after CMD configs since it used them
++ * to enable certain macros
++ */
++#include "mv-common.h"
++
++/* environment variables configuration */
++
++/* default environment variables */
++#define CONFIG_BOOTCOMMAND \
++	"ubi part ubi; " \
++	"ubi read 0x800000 kernel; " \
++	"bootm 0x800000"
++
++#define CONFIG_EXTRA_ENV_SETTINGS \
++	"console=console=ttyS0,115200\0" \
++	"mtdids=nand0=orion_nand\0" \
++	"mtdparts="CONFIG_MTDPARTS_DEFAULT "\0" \
++	"bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0"
++
++/* Ethernet driver configuration */
++#ifdef CONFIG_CMD_NET
++#define CONFIG_NETCONSOLE
++#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
++#define CONFIG_PHY_BASE_ADR	1
++#define CONFIG_RESET_PHY_R
++#endif /* CONFIG_CMD_NET */
++
++/* SATA driver configuration */
++#ifdef CONFIG_IDE
++#define __io
++#define CONFIG_IDE_PREINIT
++#define CONFIG_MVSATA_IDE_USE_PORT0
++#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
++#endif /* CONFIG_IDE */
++
++/*
++ * Enable GPI0 support
++*/
++#define CONFIG_KIRKWOOD_GPIO
++
++/* RTC driver configuration */
++#ifdef CONFIG_CMD_DATE
++#define CONFIG_RTC_MV
++#endif /* CONFIG_CMD_DATE */
++
++#endif /* _CONFIG_DNS320L_H */

package/utils/dns320l-mcu/Makefile

@@ -0,0 +1,36 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=dns320l-mcu
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=https://github.com/wigyori/dns320l-daemon.git
+PKG_SOURCE_DATE:=2024-05-11
+PKG_SOURCE_VERSION:=c74941880e0a8d2bc0344b3256b984397512e8c3
+PKG_MIRROR_HASH:=e0f186a0c139ccfac3d311f49e2fecdbd02fa3f9fe6ced4b1ce0baa603d49fc3
+PKG_MAINTAINER:=Zoltan HERPAI <[email protected]>
+PKG_LICENSE:=GPL-3.0+
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/dns320l-mcu
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Utility to control the MCU on DNS-320L
+  DEPENDS:=@TARGET_kirkwood
+  URL:=https://github.com/wigyori/dns320l-mcu
+endef
+
+define Build/Compile
+	$(MAKE) -C $(PKG_BUILD_DIR) \
+		CC="$(TARGET_CC)" \
+		CFLAGS="$(TARGET_CFLAGS) -Wall"
+endef
+
+define Package/dns320l-mcu/install
+	$(INSTALL_DIR) $(1)/usr/bin $(1)/etc/init.d
+	$(INSTALL_BIN) ./files/dns320l-mcu.init $(1)/etc/init.d/dns320l-mcu
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/dns320l-daemon $(1)/usr/bin/dns320l-mcu
+endef
+
+$(eval $(call BuildPackage,dns320l-mcu))

package/utils/dns320l-mcu/files/dns320l-mcu.init

@@ -0,0 +1,14 @@
+#!/bin/sh /etc/rc.common
+# Copyright (c) 2024 OpenWrt.org
+
+START=99
+
+USE_PROCD=1
+PROG=/usr/bin/dns320l-mcu
+
+start_service() {
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param respawn
+	procd_close_instance
+}

target/linux/kirkwood/base-files/etc/board.d/02_network

@@ -19,6 +19,7 @@ kirkwood_setup_interfaces()
 	cloudengines,pogoe02|\
 	cloudengines,pogoplugv4|\
 	ctera,c200-v1|\
+	dlink,dns320l|\
 	globalscale,sheevaplug|\
 	iom,iconnect-1.1|\
 	iom,ix2-200|\
@@ -60,6 +61,9 @@ kirkwood_setup_macs()
 	local label_mac=""
 
 	case "$board" in
+	dlink,dns320l)
+		lan_mac=$(mtd_get_mac_text "mini firmware")
+		;;
 	iptime,nas1)
 		lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
 		label_mac=$lan_mac

target/linux/kirkwood/files-6.1/arch/arm/boot/dts/kirkwood-dns320l.dts

@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree file for DLINK DNS-320L
+ *
+ * Copyright (C) 2024, Zoltan HERPAI <[email protected]>
+ * Copyright (C) 2015, Sunke Schlüters <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file is based on the works of:
+ * - Sunke Schlüters <[email protected]>
+ *   - https://github.com/scus1/dns320l/blob/master/kernel/dts/kirkwood-dns320l.dts
+ * - Andreas Böhler <[email protected]>:
+ *   - http://www.aboehler.at/doku/doku.php/projects:dns320l
+ *   - http://www.aboehler.at/hg/linux-dns320l/file/ba7a60ad7687/linux-3.12/kirkwood-dns320l.dts
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DNS-320L";
+	compatible = "dlink,dns320l", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Reset push button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 1>;
+		};
+
+		button@2 {
+			label = "USB unmount button";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&gpio0 27 1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		blue-usb {
+			label = "dns320l:usb:blue";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+		};
+
+		orange-usb {
+			label = "dns320l:usb:orange";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange-l-hdd {
+			label = "dns320l:orange:l_hdd";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange-r-hdd {
+			label = "dns320l:orange:r_hdd";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata>;
+		pinctrl-names = "default";
+
+		sata_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 0>;
+		};
+	};
+};
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "ubootenv";
+		reg = <0x100000 0x20000>;
+	};
+
+	partition@120000 {
+		label = "ubi";
+		reg = <0x120000 0x6de0000>;
+	};
+
+	partition@6f00000 {
+		label = "mini firmware";
+		reg = <0x6f00000 0xa00000>;
+	};
+
+	partition@7900000 {
+		label = "config";
+		reg = <0x7900000 0x500000>;
+	};
+
+	partition@7e00000 {
+		label = "my-dlink";
+		reg = <0x7e00000 0x200000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pmx_sata1: pmx-sata1 {
+		marvell,pins = "mpp20";
+		marvell,function = "sata1";
+	};
+
+	pmx_sata0: pmx-sata0 {
+		marvell,pins = "mpp21";
+		marvell,function = "sata0";
+	};
+
+	pmx_power_sata: pmx-power-sata {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp22", "mpp23", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp27", "mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

target/linux/kirkwood/files-6.6/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts

@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree file for DLINK DNS-320L
+ *
+ * Copyright (C) 2024, Zoltan HERPAI <[email protected]>
+ * Copyright (C) 2015, Sunke Schlüters <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This file is based on the works of:
+ * - Sunke Schlüters <[email protected]>
+ *   - https://github.com/scus1/dns320l/blob/master/kernel/dts/kirkwood-dns320l.dts
+ * - Andreas Böhler <[email protected]>:
+ *   - http://www.aboehler.at/doku/doku.php/projects:dns320l
+ *   - http://www.aboehler.at/hg/linux-dns320l/file/ba7a60ad7687/linux-3.12/kirkwood-dns320l.dts
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "D-Link DNS-320L";
+	compatible = "dlink,dns320l", "marvell,kirkwood-88f6702", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 earlyprintk";
+		stdout-path = &uart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "Reset push button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 28 1>;
+		};
+
+		button@2 {
+			label = "USB unmount button";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&gpio0 27 1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		blue-usb {
+			label = "dns320l:usb:blue";
+			gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+		};
+
+		orange-usb {
+			label = "dns320l:usb:orange";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange-l-hdd {
+			label = "dns320l:orange:l_hdd";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		orange-r-hdd {
+			label = "dns320l:orange:r_hdd";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	ocp@f1000000 {
+		sata@80000 {
+			status = "okay";
+			nr-ports = <2>;
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		serial@12100 {
+			pinctrl-0 = <&pmx_uart1>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_sata>;
+		pinctrl-names = "default";
+
+		sata_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 0>;
+		};
+	};
+};
+
+&nand {
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+	chip-delay = <40>;
+	status = "okay";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0000000 0x100000>;
+	};
+
+	partition@100000 {
+		label = "ubootenv";
+		reg = <0x100000 0x20000>;
+	};
+
+	partition@120000 {
+		label = "ubi";
+		reg = <0x120000 0x6de0000>;
+	};
+
+	partition@6f00000 {
+		label = "mini firmware";
+		reg = <0x6f00000 0xa00000>;
+	};
+
+	partition@7900000 {
+		label = "config";
+		reg = <0x7900000 0x500000>;
+	};
+
+	partition@7e00000 {
+		label = "my-dlink";
+		reg = <0x7e00000 0x200000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pmx_sata1: pmx-sata1 {
+		marvell,pins = "mpp20";
+		marvell,function = "sata1";
+	};
+
+	pmx_sata0: pmx-sata0 {
+		marvell,pins = "mpp21";
+		marvell,function = "sata0";
+	};
+
+	pmx_power_sata: pmx-power-sata {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp22", "mpp23", "mpp25", "mpp26";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp27", "mpp28", "mpp29";
+		marvell,function = "gpio";
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
+};

target/linux/kirkwood/image/Makefile

@@ -182,6 +182,14 @@ define Device/ctera_c200-v1
 endef
 TARGET_DEVICES += ctera_c200-v1
 
+define Device/dlink_dns320l
+  DEVICE_VENDOR := D-Link
+  DEVICE_MODEL := DNS-320L
+  DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug \
+	kmod-usb-storage kmod-usb-ledtrig-usbport dns320l-mcu
+endef
+TARGET_DEVICES += dlink_dns320l
+
 define Device/endian_4i-edge-200
   DEVICE_VENDOR := Endian
   DEVICE_MODEL := 4i Edge 200

target/linux/kirkwood/patches-6.1/118-dns-320l.patch

@@ -0,0 +1,35 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-db-88f6282.dtb \
+ 	kirkwood-dir665.dtb \
+ 	kirkwood-dns320.dtb \
++	kirkwood-dns320l.dtb \
+ 	kirkwood-dns325.dtb \
+ 	kirkwood-dockstar.dtb \
+ 	kirkwood-dreamplug.dtb \
+--- a/arch/arm/boot/dts/kirkwood-dns320l.dts
++++ b/arch/arm/boot/dts/kirkwood-dns320l.dts
+@@ -32,6 +32,13 @@
+ 		reg = <0x00000000 0x10000000>;
+ 	};
+ 
++	aliases {
++		led-boot = &led_orange_usb;
++		led-failsafe = &led_orange_usb;
++		led-running = &led_orange_usb;
++		led-upgrade = &led_orange_usb;
++	};
++
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+ 		stdout-path = &uart0;
+@@ -68,7 +75,7 @@
+ 			linux,default-trigger = "usbport";
+ 		};
+ 
+-		orange-usb {
++		led_orange_usb: orange-usb {
+ 			label = "dns320l:usb:orange";
+ 			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ 		};

target/linux/kirkwood/patches-6.6/118-dns-320l.patch

@@ -0,0 +1,35 @@
+--- a/arch/arm/boot/dts/marvell/Makefile
++++ b/arch/arm/boot/dts/marvell/Makefile
+@@ -92,6 +92,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-db-88f6282.dtb \
+ 	kirkwood-dir665.dtb \
+ 	kirkwood-dns320.dtb \
++	kirkwood-dns320l.dtb \
+ 	kirkwood-dns325.dtb \
+ 	kirkwood-dockstar.dtb \
+ 	kirkwood-dreamplug.dtb \
+--- a/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
++++ b/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
+@@ -32,6 +32,13 @@
+ 		reg = <0x00000000 0x10000000>;
+ 	};
+ 
++	aliases {
++		led-boot = &led_orange_usb;
++		led-failsafe = &led_orange_usb;
++		led-running = &led_orange_usb;
++		led-upgrade = &led_orange_usb;
++	};
++
+ 	chosen {
+ 		bootargs = "console=ttyS0,115200n8 earlyprintk";
+ 		stdout-path = &uart0;
+@@ -68,7 +75,7 @@
+ 			linux,default-trigger = "usbport";
+ 		};
+ 
+-		orange-usb {
++		led_orange_usb: orange-usb {
+ 			label = "dns320l:usb:orange";
+ 			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ 		};