|
|
@@ -0,0 +1,314 @@
|
|
|
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
|
+ *
|
|
|
+ * Permission to use, copy, modify, and/or distribute this software for any
|
|
|
+ * purpose with or without fee is hereby granted, provided that the above
|
|
|
+ * copyright notice and this permission notice appear in all copies.
|
|
|
+ *
|
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
|
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
|
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
|
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
|
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
|
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
|
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
|
+ *
|
|
|
+ */
|
|
|
+
|
|
|
+#include "qcom-ipq4019.dtsi"
|
|
|
+#include "qcom-ipq4019-bus.dtsi"
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "ASUS RT-AC58U";
|
|
|
+ compatible = "asus,rt-ac58u", "qcom,ipq4019";
|
|
|
+
|
|
|
+ memory {
|
|
|
+ device_type = "memory";
|
|
|
+ reg = <0x80000000 0x8000000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &power;
|
|
|
+ led-failsafe = &power;
|
|
|
+ led-running = &power;
|
|
|
+ led-upgrade = &power;
|
|
|
+ };
|
|
|
+
|
|
|
+ reserved-memory {
|
|
|
+ #address-cells = <0x1>;
|
|
|
+ #size-cells = <0x1>;
|
|
|
+ ranges;
|
|
|
+
|
|
|
+ smem@87e00000 {
|
|
|
+ reg = <0x87e00000 0x080000>;
|
|
|
+ no-map;
|
|
|
+ };
|
|
|
+
|
|
|
+ tz@87e80000 {
|
|
|
+ reg = <0x87e80000 0x180000>;
|
|
|
+ no-map;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ soc {
|
|
|
+ mdio@90000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-psgmii@98000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1949000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1949000 0x100>;
|
|
|
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@194b000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x194b000 0x100>;
|
|
|
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ess_tcsr@1953000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1953000 0x1000>;
|
|
|
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1957000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1957000 0x100>;
|
|
|
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
|
+ };
|
|
|
+
|
|
|
+ usb2@60f8800 {
|
|
|
+ status = "ok";
|
|
|
+ };
|
|
|
+
|
|
|
+ serial@78af000 {
|
|
|
+ pinctrl-0 = <&serial_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ status = "ok";
|
|
|
+ };
|
|
|
+
|
|
|
+ usb3@8af8800 {
|
|
|
+ status = "ok";
|
|
|
+ };
|
|
|
+
|
|
|
+ crypto@8e3a000 {
|
|
|
+ status = "ok";
|
|
|
+ };
|
|
|
+
|
|
|
+ wifi@a000000 {
|
|
|
+ status = "okay";
|
|
|
+ qcom,ath10k-calibration-variant = "ASUS-RT-AC58U";
|
|
|
+ };
|
|
|
+
|
|
|
+ wifi@a800000 {
|
|
|
+ status = "okay";
|
|
|
+ qcom,ath10k-calibration-variant = "ASUS-RT-AC58U";
|
|
|
+ };
|
|
|
+
|
|
|
+ watchdog@b017000 {
|
|
|
+ status = "ok";
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-switch@c000000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ edma@c080000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ gpio-keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wps {
|
|
|
+ label = "wps";
|
|
|
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_WPS_BUTTON>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ gpio-leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ power: status {
|
|
|
+ label = "rt-ac58u:blue:status";
|
|
|
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wan {
|
|
|
+ label = "rt-ac58u:blue:wan";
|
|
|
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan2G {
|
|
|
+ label = "rt-ac58u:blue:wlan2G";
|
|
|
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wan5G {
|
|
|
+ label = "rt-ac58u:blue:wlan5G";
|
|
|
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ usb {
|
|
|
+ label = "rt-ac58u:blue:usb";
|
|
|
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ lan {
|
|
|
+ label = "rt-ac58u:blue:lan";
|
|
|
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&cryptobam {
|
|
|
+ status = "ok";
|
|
|
+};
|
|
|
+
|
|
|
+&blsp_dma {
|
|
|
+ status = "ok";
|
|
|
+};
|
|
|
+
|
|
|
+&tlmm {
|
|
|
+ serial_pins: serial_pinmux {
|
|
|
+ mux {
|
|
|
+ pins = "gpio60", "gpio61";
|
|
|
+ function = "blsp_uart0";
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ spi_0_pins: spi_0_pinmux {
|
|
|
+ mux {
|
|
|
+ function = "blsp_spi0";
|
|
|
+ pins = "gpio55", "gpio56", "gpio57";
|
|
|
+ drive-strength = <12>;
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+
|
|
|
+ mux_cs {
|
|
|
+ function = "gpio";
|
|
|
+ pins = "gpio54", "gpio59";
|
|
|
+ drive-strength = <2>;
|
|
|
+ bias-disable;
|
|
|
+ output-high;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&spi_0 { /* BLSP1 QUP1 */
|
|
|
+ pinctrl-0 = <&spi_0_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ status = "ok";
|
|
|
+ cs-gpios = <&tlmm 54 0>,
|
|
|
+ <&tlmm 59 0>;
|
|
|
+
|
|
|
+ m25p80@0 {
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+ /*
|
|
|
+ * U-boot looks for "n25q128a11" node,
|
|
|
+ * if we don't have it, it will spit out the following warning:
|
|
|
+ * "ipq: fdt fixup unable to find compatible node".
|
|
|
+ */
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <0>;
|
|
|
+ linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
|
|
|
+ spi-max-frequency = <24000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition0@0 {
|
|
|
+ label = "SBL1";
|
|
|
+ reg = <0x00000000 0x00040000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ partition1@40000 {
|
|
|
+ label = "MIBIB";
|
|
|
+ reg = <0x00040000 0x00020000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ partition2@60000 {
|
|
|
+ label = "QSEE";
|
|
|
+ reg = <0x00060000 0x00060000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ partition3@c0000 {
|
|
|
+ label = "CDT";
|
|
|
+ reg = <0x000c0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ partition4@d0000 {
|
|
|
+ label = "DDRPARAMS";
|
|
|
+ reg = <0x000d0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ partition5@e0000 {
|
|
|
+ label = "APPSBLENV"; /* uboot env*/
|
|
|
+ reg = <0x000e0000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ partition5@f0000 {
|
|
|
+ label = "APPSBL"; /* uboot */
|
|
|
+ reg = <0x000f0000 0x00080000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ partition5@170000 {
|
|
|
+ label = "ART";
|
|
|
+ reg = <0x00170000 0x00010000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+ /* 0x00180000 - 0x00200000 unused */
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ mt29f@1 {
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <0>;
|
|
|
+ compatible = "spinand,mt29f";
|
|
|
+ reg = <1>;
|
|
|
+ spi-max-frequency = <24000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition0@0 {
|
|
|
+ label = "ubi";
|
|
|
+ reg = <0x00000000 0x08000000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&usb3_ss_phy {
|
|
|
+ status = "ok";
|
|
|
+};
|
|
|
+
|
|
|
+&usb3_hs_phy {
|
|
|
+ status = "ok";
|
|
|
+};
|
|
|
+
|
|
|
+&usb2_hs_phy {
|
|
|
+ status = "ok";
|
|
|
+};
|
Christian Lamparter