kernel: cleanup CONFIG_SCHED_HRTICK

Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd7656336162360ebf66147326763ddae3f8d.

Signed-off-by: Stijn Tintel <[email protected]>

target/linux/apm821xx/config-4.9

@@ -292,7 +292,6 @@ CONFIG_RD_GZIP=y
 # CONFIG_RELOCATABLE is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_SAM440EP is not set
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SENSORS_TC654 is not set

target/linux/ar71xx/config-4.4

@@ -432,7 +432,6 @@ CONFIG_RTL8366RB_PHY=y
 CONFIG_RTL8366S_PHY=y
 CONFIG_RTL8366_SMI=y
 CONFIG_RTL8367_PHY=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/armvirt/config-4.9

@@ -154,7 +154,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_VIRTIO=y

target/linux/at91/config-4.4

@@ -231,7 +231,6 @@ CONFIG_RTC_CLASS=y
 # CONFIG_RTC_DRV_CMOS is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_SAMA5D4_WATCHDOG is not set
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250 is not set

target/linux/ath25/config-4.9

@@ -136,7 +136,6 @@ CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
 # CONFIG_RCU_STALL_COMMON is not set
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/bcm53xx/config-4.4

@@ -287,7 +287,6 @@ CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_FSL=y

target/linux/bcm53xx/config-4.9

@@ -287,7 +287,6 @@ CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_FSL=y

target/linux/brcm2708/bcm2708/config-4.9

@@ -326,7 +326,6 @@ CONFIG_REGMAP_MMIO=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_LOWLEVEL is not set

target/linux/brcm2708/bcm2709/config-4.9

@@ -354,7 +354,6 @@ CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_LOWLEVEL is not set

target/linux/brcm2708/bcm2710/config-4.9

@@ -372,7 +372,6 @@ CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 # CONFIG_SCSI_LOWLEVEL is not set

target/linux/brcm47xx/config-4.4

@@ -151,7 +151,6 @@ CONFIG_PERF_USE_VMALLOC=y
 CONFIG_PGTABLE_LEVELS=2
 CONFIG_PHYLIB=y
 # CONFIG_RCU_STALL_COMMON is not set
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_EXTENDED=y

target/linux/brcm63xx/config-4.4

@@ -213,7 +213,6 @@ CONFIG_REGMAP_MMIO=y
 CONFIG_RELAY=y
 CONFIG_RTL8366_SMI=y
 CONFIG_RTL8367_PHY=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250 is not set

target/linux/cns3xxx/config-4.9

@@ -253,7 +253,6 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SENSORS_AD7418=y

target/linux/imx6/config-4.9

@@ -418,7 +418,6 @@ CONFIG_RTC_DRV_DS1672=y
 CONFIG_RTC_I2C_AND_SPI=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SERIAL_8250_FSL=y

target/linux/ipq806x/config-4.9

@@ -439,7 +439,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_I2C_AND_SPI=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_FSL=y

target/linux/ixp4xx/config-4.4

@@ -224,7 +224,6 @@ CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SENSORS_AD7418=y
 CONFIG_SENSORS_GSC=y

target/linux/kirkwood/config-4.4

@@ -275,7 +275,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MV=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SATA_MV=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y

target/linux/lantiq/config-4.4

@@ -174,7 +174,6 @@ CONFIG_PSB6970_PHY=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RTL8366RB_PHY=y
 CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SENSORS_LTQ_CPUTEMP is not set

target/linux/lantiq/config-4.9

@@ -177,7 +177,6 @@ CONFIG_PSB6970_PHY=y
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RTL8366RB_PHY=y
 CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SENSORS_LTQ_CPUTEMP is not set

target/linux/layerscape/config-4.4

@@ -261,7 +261,6 @@ CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SERIAL_8250_FSL=y

target/linux/malta/config-4.4

@@ -240,7 +240,6 @@ CONFIG_RELAY=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RTC_CLASS=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SECCOMP=y

target/linux/mediatek/config-4.9

@@ -389,7 +389,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_I2C_AND_SPI=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_DMA is not set

target/linux/mpc85xx/config-4.9

@@ -307,7 +307,6 @@ CONFIG_RTC_I2C_AND_SPI=y
 CONFIG_RTC_MC146818_LIB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_SBC8548 is not set
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_EXTENDED=y

target/linux/mvebu/config-4.4

@@ -371,7 +371,6 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_SATA_MV=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SENSORS_PWM_FAN=y

target/linux/mvebu/config-4.9

@@ -388,7 +388,6 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_SATA_MV=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SENSORS_PWM_FAN=y

target/linux/omap/config-4.4

@@ -560,7 +560,6 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_HRTICK=y
 CONFIG_SCHED_INFO=y
 CONFIG_SCHED_MC=y
 CONFIG_SCSI=y

target/linux/orion/config-4.4

@@ -222,7 +222,6 @@ CONFIG_RATIONAL=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RTC_CLASS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 CONFIG_SERIAL_8250_FSL=y

target/linux/oxnas/config-4.4

@@ -322,7 +322,6 @@ CONFIG_RTC_CLASS=y
 # CONFIG_RTC_DRV_CMOS is not set
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SERIAL_8250_FSL=y

target/linux/pistachio/config-4.9

@@ -277,7 +277,6 @@ CONFIG_RESET_PISTACHIO=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_HRTICK=y
 CONFIG_SCHED_INFO=y
 CONFIG_SCSI=y
 CONFIG_SCSI_SPI_ATTRS=y

target/linux/ramips/mt7620/config-4.4

@@ -178,7 +178,6 @@ CONFIG_RALINK=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/mt7620/config-4.9

@@ -181,7 +181,6 @@ CONFIG_RALINK=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/mt7621/config-4.4

@@ -217,7 +217,6 @@ CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCHED_SMT=y
 # CONFIG_SCSI_DMA is not set

target/linux/ramips/mt7621/config-4.9

@@ -233,7 +233,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_I2C_AND_SPI=y
 CONFIG_RTC_MC146818_LIB=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCHED_SMT=y
 # CONFIG_SCSI_DMA is not set

target/linux/ramips/mt7628/config-4.4

@@ -174,7 +174,6 @@ CONFIG_RALINK=y
 # CONFIG_RALINK_WDT is not set
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/mt7628/config-4.9

@@ -176,7 +176,6 @@ CONFIG_RALINK=y
 # CONFIG_RALINK_WDT is not set
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/mt7688/config-4.4

@@ -174,7 +174,6 @@ CONFIG_RALINK=y
 # CONFIG_RALINK_WDT is not set
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/mt7688/config-4.9

@@ -176,7 +176,6 @@ CONFIG_RALINK=y
 # CONFIG_RALINK_WDT is not set
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/rt288x/config-4.4

@@ -164,7 +164,6 @@ CONFIG_RALINK=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/rt288x/config-4.9

@@ -169,7 +169,6 @@ CONFIG_RALINK=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/rt305x/config-4.4

@@ -163,7 +163,6 @@ CONFIG_RALINK=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/rt305x/config-4.9

@@ -166,7 +166,6 @@ CONFIG_RALINK=y
 CONFIG_RALINK_WDT=y
 # CONFIG_RCU_STALL_COMMON is not set
 CONFIG_RESET_CONTROLLER=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/rt3883/config-4.4

@@ -171,7 +171,6 @@ CONFIG_RESET_CONTROLLER=y
 CONFIG_RTL8366_SMI=y
 CONFIG_RTL8367B_PHY=y
 CONFIG_RTL8367_PHY=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/ramips/rt3883/config-4.9

@@ -174,7 +174,6 @@ CONFIG_RESET_CONTROLLER=y
 CONFIG_RTL8366_SMI=y
 CONFIG_RTL8367B_PHY=y
 CONFIG_RTL8367_PHY=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_FSL is not set

target/linux/sunxi/config-4.4

@@ -444,7 +444,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_SATA_PMP=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SDIO_UART=y

target/linux/x86/config-4.9

@@ -371,7 +371,6 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 # CONFIG_SBC8360_WDT is not set
 # CONFIG_SBC_EPX_C3_WATCHDOG is not set
 # CONFIG_SC1200_WDT is not set
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_SPI_ATTRS=y

target/linux/zynq/config-4.4

@@ -573,7 +573,6 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
 # CONFIG_SCHED_INFO is not set
 CONFIG_SCHED_MC=y
 CONFIG_SCHED_SMT=y