|
|
@@ -0,0 +1,269 @@
|
|
|
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
|
|
+ * Copyright (c) 2019, Robert Marko <[email protected]>
|
|
|
+ *
|
|
|
+ * Permission to use, copy, modify, and/or distribute this software for any
|
|
|
+ * purpose with or without fee is hereby granted, provided that the above
|
|
|
+ * copyright notice and this permission notice appear in all copies.
|
|
|
+ *
|
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
|
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
|
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
|
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
|
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
|
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
|
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
|
+ *
|
|
|
+ */
|
|
|
+
|
|
|
+#include "qcom-ipq4019.dtsi"
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
+#include <dt-bindings/input/input.h>
|
|
|
+#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
+
|
|
|
+/ {
|
|
|
+ model = "Mikrotik Wireless Wire Dish LHGG-60ad";
|
|
|
+ compatible = "mikrotik,lhgg-60ad";
|
|
|
+
|
|
|
+ memory {
|
|
|
+ device_type = "memory";
|
|
|
+ reg = <0x80000000 0x10000000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ chosen {
|
|
|
+ stdout-path = "serial0:115200n8";
|
|
|
+ };
|
|
|
+
|
|
|
+ aliases {
|
|
|
+ led-boot = &user;
|
|
|
+ led-failsafe = &user;
|
|
|
+ led-running = &user;
|
|
|
+ led-upgrade = &user;
|
|
|
+ };
|
|
|
+
|
|
|
+ soc {
|
|
|
+ rng@22000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ mdio@90000 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ /delete-node/ ethernet-phy@1;
|
|
|
+ /delete-node/ ethernet-phy@2;
|
|
|
+ /delete-node/ ethernet-phy@3;
|
|
|
+ /delete-node/ ethernet-phy@4;
|
|
|
+ /delete-node/ psgmii-phy@5;
|
|
|
+ };
|
|
|
+
|
|
|
+ counter@4a1000 {
|
|
|
+ compatible = "qcom,qca-gcnt";
|
|
|
+ reg = <0x4a1000 0x4>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1949000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1949000 0x100>;
|
|
|
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ess_tcsr@1953000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1953000 0x1000>;
|
|
|
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
|
|
|
+ };
|
|
|
+
|
|
|
+ tcsr@1957000 {
|
|
|
+ compatible = "qcom,tcsr";
|
|
|
+ reg = <0x1957000 0x100>;
|
|
|
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
|
+ };
|
|
|
+
|
|
|
+ crypto@8e3a000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ watchdog@b017000 {
|
|
|
+ status = "okay";
|
|
|
+ };
|
|
|
+
|
|
|
+ ess-switch@c000000 {
|
|
|
+ switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
|
|
|
+ switch_lan_bmp = <0x0>; /* lan port bitmap */
|
|
|
+ switch_wan_bmp = <0x10>; /* wan port bitmap */
|
|
|
+ };
|
|
|
+
|
|
|
+ edma@c080000 {
|
|
|
+ status = "okay";
|
|
|
+ phy-mode = "rgmii-id";
|
|
|
+ qcom,num_gmac = <1>;
|
|
|
+ qcom,single-phy;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ keys {
|
|
|
+ compatible = "gpio-keys";
|
|
|
+
|
|
|
+ reset {
|
|
|
+ label = "reset";
|
|
|
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
|
+ linux,code = <KEY_RESTART>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ leds {
|
|
|
+ compatible = "gpio-leds";
|
|
|
+
|
|
|
+ power: power {
|
|
|
+ label = "blue:power";
|
|
|
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
|
|
|
+ default-state = "keep";
|
|
|
+ panic-indicator;
|
|
|
+ };
|
|
|
+
|
|
|
+ user: user {
|
|
|
+ label = "yellow:user";
|
|
|
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan {
|
|
|
+ label = "green:wlan";
|
|
|
+ gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ align-left {
|
|
|
+ label = "green:align-left";
|
|
|
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ align-right {
|
|
|
+ label = "green:align-right";
|
|
|
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan-rx {
|
|
|
+ label = "green:align-down";
|
|
|
+ gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+
|
|
|
+ wlan-tx {
|
|
|
+ label = "green:align-up";
|
|
|
+ gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&tlmm {
|
|
|
+ serial_pins: serial_pinmux {
|
|
|
+ mux {
|
|
|
+ pins = "gpio60", "gpio61";
|
|
|
+ function = "blsp_uart0";
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ spi_0_pins: spi-0-pinmux {
|
|
|
+ pinmux {
|
|
|
+ function = "blsp_spi0";
|
|
|
+ pins = "gpio13", "gpio14", "gpio15";
|
|
|
+ bias-disable;
|
|
|
+ };
|
|
|
+
|
|
|
+ pinmux_cs {
|
|
|
+ function = "gpio";
|
|
|
+ pins = "gpio12";
|
|
|
+ bias-disable;
|
|
|
+ output-high;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp_dma {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&blsp1_spi1 {
|
|
|
+ pinctrl-0 = <&spi_0_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ m25p80@0 {
|
|
|
+ reg = <0>;
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ spi-max-frequency = <24000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ label = "Qualcomm";
|
|
|
+ reg = <0x0 0x80000>;
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@80000 {
|
|
|
+ compatible = "mikrotik,routerboot-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+ label = "RouterBoot";
|
|
|
+ reg = <0x80000 0x80000>;
|
|
|
+ read-only;
|
|
|
+
|
|
|
+ hard_config {
|
|
|
+ read-only;
|
|
|
+ size = <0x2000>;
|
|
|
+ };
|
|
|
+
|
|
|
+ dtb_config {
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ soft_config {
|
|
|
+ };
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@100000 {
|
|
|
+ compatible = "mikrotik,minor";
|
|
|
+ label = "firmware";
|
|
|
+ reg = <0x100000 0xf00000>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&blsp1_uart1 {
|
|
|
+ pinctrl-0 = <&serial_pins>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&cryptobam {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&pcie0 {
|
|
|
+ status = "okay";
|
|
|
+ perst-gpio = <&tlmm 42 GPIO_ACTIVE_HIGH>;
|
|
|
+
|
|
|
+ bridge@0,0 {
|
|
|
+ reg = <0x00000000 0 0 0 0>;
|
|
|
+ #address-cells = <3>;
|
|
|
+ #size-cells = <2>;
|
|
|
+ ranges;
|
|
|
+
|
|
|
+ /* wil6210 802.11ad card */
|
|
|
+ wifi: wifi@1,0 {
|
|
|
+ status = "okay";
|
|
|
+ /* wil6210 driver has no compatible */
|
|
|
+ reg = <0x00010000 0 0 0 0>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&gmac0 {
|
|
|
+ qcom,phy_mdio_addr = <0>;
|
|
|
+ qcom,poll_required = <1>;
|
|
|
+ vlan_tag = <0 0x20>;
|
|
|
+};
|
Alexander Couzens