ramips: use CONFIG_MTD_SPLIT_UIMAGE_FW instead of CONFIG_MTD_UIMAGE_SPLIT

Signed-off-by: Felix Fietkau <[email protected]>

SVN-Revision: 43813

target/linux/ramips/mt7620/config-3.14

@@ -114,7 +114,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND_MT7620=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RALINK=y

target/linux/ramips/mt7621/config-3.14

@@ -119,8 +119,8 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
 CONFIG_MTD_SPLIT_TRX_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NET_FLOW_LIMIT=y
 CONFIG_NET_RALINK=y

target/linux/ramips/mt7628/config-3.14

@@ -115,7 +115,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND_MT7620=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RALINK=y

target/linux/ramips/rt288x/config-3.14

@@ -108,7 +108,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RALINK=y

target/linux/ramips/rt305x/config-3.14

@@ -108,7 +108,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RALINK=y

target/linux/ramips/rt3883/config-3.14

@@ -110,7 +110,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UIMAGE_SPLIT=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEED_PER_CPU_KM=y
 CONFIG_NET_RALINK=y