kernel: rtl8367b: fix external interface modes

The interface mode number of RGMII_33V is 7 on RTL8367, but it's 9 on
RTL8367B.

the external interface modes for RTL8367 are follows:

- 0, Disabled
- 1, RGMII
- 2, MII_MAC
- 3, MII_PHY
- 4, TMII_MAC
- 5, TMII_PHY
- 6, GMII
- 7, RGMII_33V

the external interface modes for RTL8367B are follows:

- 0, Disabled
- 1, RGMII
- 2, MII_MAC
- 3, MII_PHY
- 4, TMII_MAC
- 5, TMII_PHY
- 6, GMII
- 7, RMII_MAC
- 8, RMII_PHY
- 9, RGMII_33V

But the driver in U-Boot of RT-N56U GPL tar blocks using RGMII_33V (9)
mode and it seems to be unsupported on RTL8367B, so drop it from
switch-case in rtl8367b_extif_set_mode.

ref (RTL8367):

- TL-WR2453ND v1

ref (RTL8367B):

- ASUS RT-N56U
- TP-Link Archer C2 v1

Signed-off-by: INAGAKI Hiroshi <[email protected]>

target/linux/generic/files/drivers/net/phy/rtl8367b.c

@@ -781,7 +781,6 @@ static int rtl8367b_extif_set_mode(struct rtl8366_smi *smi, int id,
 	/* set port mode */
 	switch (mode) {
 	case RTL8367_EXTIF_MODE_RGMII:
-	case RTL8367_EXTIF_MODE_RGMII_33V:
 		REG_RMW(smi, RTL8367B_CHIP_DEBUG0_REG,
 			RTL8367B_DEBUG0_SEL33(id),
 			RTL8367B_DEBUG0_SEL33(id));

target/linux/generic/files/include/linux/rtl8367.h

@@ -39,6 +39,9 @@ enum rtl8367_extif_mode {
 	RTL8367_EXTIF_MODE_TMII_PHY,
 	RTL8367_EXTIF_MODE_GMII,
 	RTL8367_EXTIF_MODE_RGMII_33V,
+	RTL8367B_EXTIF_MODE_RMII_MAC = 7,
+	RTL8367B_EXTIF_MODE_RMII_PHY,
+	RTL8367B_EXTIF_MODE_RGMII_33V,
 };
 
 struct rtl8367_extif_config {