ar71xx: add DB120 board specific PCI initialization

Signed-off-by: Jaiganesh Narayanan <[email protected]>

SVN-Revision: 26523

target/linux/ar71xx/config-2.6.37

@@ -6,6 +6,7 @@ CONFIG_AR71XX_DEV_AP91_PCI=y
 CONFIG_AR71XX_DEV_AP94_PCI=y
 CONFIG_AR71XX_DEV_AR913X_WMAC=y
 CONFIG_AR71XX_DEV_AR934X_WMAC=y
+CONFIG_AR71XX_DEV_DB120_PCI=y
 CONFIG_AR71XX_DEV_DSA=y
 CONFIG_AR71XX_DEV_GPIO_BUTTONS=y
 CONFIG_AR71XX_DEV_LEDS_GPIO=y

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -31,6 +31,7 @@ config AR71XX_MACH_AP96
 config AR71XX_MACH_DB120
 	bool "Atheros DB120 board support"
 	select AR71XX_DEV_AR934X_WMAC
+	select AR71XX_DEV_DB120_PCI if PCI
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
@@ -313,6 +314,10 @@ config AR71XX_DEV_AR913X_WMAC
 config AR71XX_DEV_AR934X_WMAC
 	def_bool n
 
+config AR71XX_DEV_DB120_PCI
+	select AR71XX_PCI_ATH9K_FIXUP
+	def_bool n
+
 config AR71XX_DEV_DSA
 	def_bool n
 

target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_AR71XX_DEV_AP91_PCI)	+= dev-ap91-pci.o
 obj-$(CONFIG_AR71XX_DEV_AP94_PCI)	+= dev-ap94-pci.o
 obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC)	+= dev-ar913x-wmac.o
 obj-$(CONFIG_AR71XX_DEV_AR934X_WMAC)	+= dev-ar934x-wmac.o
+obj-$(CONFIG_AR71XX_DEV_DB120_PCI)	+= dev-db120-pci.o
 obj-$(CONFIG_AR71XX_DEV_DSA)		+= dev-dsa.o
 obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o
 obj-$(CONFIG_AR71XX_DEV_LEDS_GPIO)	+= dev-leds-gpio.o

target/linux/ar71xx/files/arch/mips/ar71xx/dev-db120-pci.c

@@ -0,0 +1,31 @@
+/*
+ *  Atheros db120 reference board PCI initialization
+ *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <[email protected]>
+ *
+ *  Parts of this file are based on Atheros linux 2.6.31 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <asm/mach-ar71xx/pci.h>
+
+#include "dev-db120-pci.h"
+
+static struct ar71xx_pci_irq db120_pci_irqs[] __initdata = {
+	{
+		.slot	= 0,
+		.pin	= 1,
+		.irq	= AR71XX_PCI_IRQ_DEV0,
+	}
+};
+
+void __init db120_pci_init(void)
+{
+	ar71xx_pci_init(ARRAY_SIZE(db120_pci_irqs), db120_pci_irqs);
+}

target/linux/ar71xx/files/arch/mips/ar71xx/dev-db120-pci.h

@@ -0,0 +1,22 @@
+/*
+ *  Atheros DB120 reference board PCI initialization
+ *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <[email protected]>
+ *
+ *  Parts of this file are based on Atheros linux 2.6.31 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_DB120_PCI_H
+#define _AR71XX_DEV_DB120_PCI_H
+
+#if defined(CONFIG_AR71XX_DEV_DB120_PCI)
+void db120_pci_init(void);
+#else
+static inline void db120_pci_init(void) { }
+#endif
+
+#endif /* _AR71XX_DEV_DB120_PCI_H */

target/linux/ar71xx/files/arch/mips/ar71xx/mach-db120.c

@@ -20,6 +20,7 @@
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
 #include "dev-ar934x-wmac.h"
+#include "dev-db120-pci.h"
 
 #define DB120_GPIO_LED_USB	11
 #define DB120_GPIO_LED_WLAN_5G	12
@@ -125,6 +126,8 @@ static void __init db120_setup(void)
 
 	ar934x_add_device_wmac(art + DB120_CALDATA_OFFSET,
 				art + DB120_WMAC_MAC_OFFSET);
+
+	db120_pci_init();
 }
 
 MIPS_MACHINE(AR71XX_MACH_DB120, "DB120", "Atheros DB120", db120_setup);