brcm47xx: rename target to bcm47xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <[email protected]>

package/base-files/files/etc/init.d/boot

@@ -40,7 +40,7 @@ boot() {
 	/sbin/kmodloader
 
 	[ ! -f /etc/config/wireless ] && {
-		# compat for brcm47xx and mvebu
+		# compat for bcm47xx and mvebu
 		sleep 1
 	}
 

package/kernel/broadcom-wl/Makefile

@@ -34,13 +34,13 @@ define Package/broadcom-wl/Default
   CATEGORY:=Kernel modules
   DEPENDS:=@(PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini)
   SUBMENU:=Proprietary BCM43xx WiFi driver
-  SUBMENUDEP:=(TARGET_brcm47xx||TARGET_brcm63xx)
+  SUBMENUDEP:=(TARGET_bcm47xx||TARGET_brcm63xx)
 endef
 
 define KernelPackage/brcm-wl/Default
   $(call Package/broadcom-wl/Default)
   SECTION:=kernel
-  DEPENDS:=@(TARGET_brcm47xx||TARGET_brcm63xx) +wireless-tools
+  DEPENDS:=@(TARGET_bcm47xx||TARGET_brcm63xx) +wireless-tools
   TITLE:=Kernel driver for BCM43xx chipsets
   FILES:=$(PKG_BUILD_DIR)/driver$(1)/wl.ko $(PKG_BUILD_DIR)/glue/wl_glue.ko
   AUTOLOAD:=$(call AutoProbe,wl)

package/kernel/linux/modules/netdevices.mk

@@ -704,7 +704,7 @@ $(eval $(call KernelPackage,ixgbevf))
 define KernelPackage/b44
   TITLE:=Broadcom 44xx driver
   KCONFIG:=CONFIG_B44
-  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx_mips74k +!TARGET_brcm47xx:kmod-ssb +kmod-mii +kmod-libphy
+  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx_mips74k +!TARGET_bcm47xx:kmod-ssb +kmod-mii +kmod-libphy
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/b44.ko
   AUTOLOAD:=$(call AutoLoad,19,b44,1)
@@ -759,7 +759,7 @@ define KernelPackage/tg3
   TITLE:=Broadcom Tigon3 Gigabit Ethernet
   KCONFIG:=CONFIG_TIGON3 \
 	CONFIG_TIGON3_HWMON=n
-  DEPENDS:=+!TARGET_brcm47xx:kmod-libphy +kmod-ptp
+  DEPENDS:=+!TARGET_bcm47xx:kmod-libphy +kmod-ptp
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   FILES:=$(LINUX_DIR)/drivers/net/ethernet/broadcom/tg3.ko
   AUTOLOAD:=$(call AutoLoad,19,tg3,1)

package/kernel/linux/modules/other.mk

@@ -418,7 +418,7 @@ $(eval $(call KernelPackage,softdog))
 define KernelPackage/ssb
   SUBMENU:=$(OTHER_MENU)
   TITLE:=Silicon Sonics Backplane glue code
-  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
+  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_brcm63xx
   KCONFIG:=\
 	CONFIG_SSB \
 	CONFIG_SSB_B43_PCI_BRIDGE=y \
@@ -444,7 +444,7 @@ $(eval $(call KernelPackage,ssb))
 define KernelPackage/bcma
   SUBMENU:=$(OTHER_MENU)
   TITLE:=BCMA support
-  DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
+  DEPENDS:=@PCI_SUPPORT @!TARGET_bcm47xx @!TARGET_bcm53xx
   KCONFIG:=\
 	CONFIG_BCMA \
 	CONFIG_BCMA_POSSIBLE=y \

package/kernel/linux/modules/usb.mk

@@ -274,8 +274,8 @@ define KernelPackage/usb-ohci
   TITLE:=Support for OHCI controllers
   DEPENDS:= \
 	+TARGET_bcm53xx:kmod-usb-bcma \
-	+TARGET_brcm47xx:kmod-usb-bcma \
-	+TARGET_brcm47xx:kmod-usb-ssb
+	+TARGET_bcm47xx:kmod-usb-bcma \
+	+TARGET_bcm47xx:kmod-usb-ssb
   KCONFIG:= \
 	CONFIG_USB_OHCI \
 	CONFIG_USB_OHCI_HCD \
@@ -322,7 +322,7 @@ $(eval $(call KernelPackage,usb-ohci-pci))
 
 define KernelPackage/usb-bcma
   TITLE:=Support for BCMA USB controllers
-  DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx||TARGET_bcm53xx
+  DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx||TARGET_bcm53xx
   HIDDEN:=1
   KCONFIG:=CONFIG_USB_HCD_BCMA
   FILES:= \
@@ -345,7 +345,7 @@ $(eval $(call KernelPackage,usb-fotg210))
 
 define KernelPackage/usb-ssb
   TITLE:=Support for SSB USB controllers
-  DEPENDS:=@USB_SUPPORT @TARGET_brcm47xx
+  DEPENDS:=@USB_SUPPORT @TARGET_bcm47xx
   HIDDEN:=1
   KCONFIG:=CONFIG_USB_HCD_SSB
   FILES:= \
@@ -370,8 +370,8 @@ $(eval $(call KernelPackage,usb-ehci))
 define KernelPackage/usb2
   TITLE:=Support for USB2 controllers
   DEPENDS:=\
-	+TARGET_brcm47xx:kmod-usb-bcma \
-	+TARGET_brcm47xx:kmod-usb-ssb \
+	+TARGET_bcm47xx:kmod-usb-bcma \
+	+TARGET_bcm47xx:kmod-usb-ssb \
 	+TARGET_bcm53xx:kmod-usb-bcma \
 	+TARGET_bcm53xx:kmod-phy-bcm-ns-usb2 \
 	+TARGET_ath79:kmod-phy-ath79-usb \

package/kernel/mac80211/broadcom.mk

@@ -118,14 +118,14 @@ define KernelPackage/b43/config
 config PACKAGE_B43_USE_SSB
 	select PACKAGE_kmod-ssb
 	tristate
-	depends on !TARGET_brcm47xx && !TARGET_brcm63xx
+	depends on !TARGET_bcm47xx && !TARGET_brcm63xx
 	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
 	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
 
 config PACKAGE_B43_USE_BCMA
 	select PACKAGE_kmod-bcma
 	tristate
-	depends on !TARGET_brcm47xx && !TARGET_bcm53xx
+	depends on !TARGET_bcm47xx && !TARGET_bcm53xx
 	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
 	default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
 
@@ -205,8 +205,8 @@ config PACKAGE_B43_USE_BCMA
 	config B43_FW_SQUASH_COREREVS
 		string "Core revisions to include"
 		depends on B43_FW_SQUASH
-		default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
-		default "16,28,29,30" if TARGET_brcm47xx_mips74k
+		default "5,6,7,8,9,10,11,13,15" if TARGET_bcm47xx_legacy
+		default "16,28,29,30" if TARGET_bcm47xx_mips74k
 		default "5,6,7,8,9,10,11,13,15,16,28,29,30"
 		help
 		  This is a comma seperated list of core revision numbers.
@@ -220,8 +220,8 @@ config PACKAGE_B43_USE_BCMA
 	config B43_FW_SQUASH_PHYTYPES
 		string "PHY types to include"
 		depends on B43_FW_SQUASH
-		default "G,N,LP" if TARGET_brcm47xx_legacy
-		default "N,HT" if TARGET_brcm47xx_mips74k
+		default "G,N,LP" if TARGET_bcm47xx_legacy
+		default "N,HT" if TARGET_bcm47xx_mips74k
 		default "G,N,LP,HT"
 		help
 		  This is a comma seperated list of PHY types:
@@ -248,15 +248,15 @@ config PACKAGE_B43_USE_BCMA
 		  This allows choosing buses that b43 should support.
 
 	config PACKAGE_B43_BUSES_BCMA_AND_SSB
-		depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+		depends on !TARGET_bcm47xx_legacy && !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
 		bool "BCMA and SSB"
 
 	config PACKAGE_B43_BUSES_BCMA
-		depends on !TARGET_brcm47xx_legacy
+		depends on !TARGET_bcm47xx_legacy
 		bool "BCMA only"
 
 	config PACKAGE_B43_BUSES_SSB
-		depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
+		depends on !TARGET_bcm47xx_mips74k && !TARGET_bcm53xx
 		bool "SSB only"
 
 	endchoice
@@ -281,7 +281,7 @@ config PACKAGE_B43_USE_BCMA
 
 	config PACKAGE_B43_PHY_G
 		bool "Enable support for G-PHYs"
-		default n if TARGET_brcm47xx_mips74k
+		default n if TARGET_bcm47xx_mips74k
 		default y
 		help
 		  Enable support for G-PHY. This includes support for the following devices:
@@ -304,7 +304,7 @@ config PACKAGE_B43_USE_BCMA
 
 	config PACKAGE_B43_PHY_LP
 		bool "Enable support for LP-PHYs"
-		default n if TARGET_brcm47xx_mips74k
+		default n if TARGET_bcm47xx_mips74k
 		default y
 		help
 		  Enable support for LP-PHY. This includes support for the following devices:
@@ -315,7 +315,7 @@ config PACKAGE_B43_USE_BCMA
 
 	config PACKAGE_B43_PHY_HT
 		bool "Enable support for HT-PHYs"
-		default n if TARGET_brcm47xx_legacy
+		default n if TARGET_bcm47xx_legacy
 		default y
 		help
 		  Enable support for HT-PHY. This includes support for the following devices:
@@ -347,7 +347,7 @@ define KernelPackage/b43legacy
   URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
   KCONFIG:= \
   	CONFIG_HW_RANDOM=y
-  DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_brcm47xx_mips74k +b43legacy-firmware
+  DEPENDS+= +kmod-mac80211 +!(TARGET_bcm47xx||TARGET_brcm63xx):kmod-ssb @!TARGET_bcm47xx_mips74k +b43legacy-firmware
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
   AUTOLOAD:=$(call AutoProbe,b43legacy)
   MENU:=1
@@ -401,7 +401,7 @@ define KernelPackage/brcmsmac
   $(call KernelPackage/mac80211/Default)
   TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
   URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
-  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
+  DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_bcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
   FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
   AUTOLOAD:=$(call AutoProbe,brcmsmac)
   MENU:=1

package/kernel/rtc-rv5c386a/Makefile

@@ -15,7 +15,7 @@ include $(INCLUDE_DIR)/package.mk
 
 define KernelPackage/rtc-rv5c386a
   SUBMENU:=Other modules
-  DEPENDS:=@TARGET_brcm47xx @!IN_SDK
+  DEPENDS:=@TARGET_bcm47xx @!IN_SDK
   TITLE:=Driver for RTC RV5C386A (used in WL-700gE and WL-HDD)
   AUTOLOAD:=$(call AutoLoad,70,rtc)
   FILES:=$(PKG_BUILD_DIR)/rtc.ko

package/system/mtd/src/Makefile

@@ -11,7 +11,7 @@ obj.ar71xx = trx.o $(obj.seama) $(obj.wrgg)
 obj.ath79 = $(obj.seama)
 obj.gemini = $(obj.wrgg)
 obj.brcm = trx.o
-obj.brcm47xx = $(obj.brcm)
+obj.bcm47xx = $(obj.brcm)
 obj.bcm53xx = $(obj.brcm) $(obj.seama)
 obj.brcm63xx = imagetag.o
 obj.ramips = $(obj.seama) $(obj.tpl) $(obj.wrg)

package/system/mtd/src/mtd.h

@@ -3,7 +3,7 @@
 
 #include <stdbool.h>
 
-#if defined(target_brcm47xx) || defined(target_bcm53xx)
+#if defined(target_bcm47xx) || defined(target_bcm53xx)
 #define target_brcm 1
 #endif
 

package/utils/nvram/Makefile

@@ -21,7 +21,7 @@ define Package/nvram
   CATEGORY:=Base system
   TITLE:=Userspace port of the Broadcom NVRAM manipulation tool
   MAINTAINER:=Jo-Philipp Wich <[email protected]>
-  DEPENDS:=@(TARGET_brcm47xx||TARGET_bcm53xx||TARGET_ar71xx||TARGET_ath79)
+  DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm53xx||TARGET_ar71xx||TARGET_ath79)
 endef
 
 define Package/nvram/description
@@ -42,7 +42,7 @@ endef
 define Package/nvram/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/nvram $(1)/usr/sbin/
-ifneq ($(CONFIG_TARGET_brcm47xx),)
+ifneq ($(CONFIG_TARGET_bcm47xx),)
 	$(INSTALL_DIR) $(1)/etc/init.d
 	$(INSTALL_BIN) ./files/nvram.init $(1)/etc/init.d/nvram
 endif

package/utils/otrx/Makefile

@@ -19,7 +19,7 @@ define Package/otrx
   CATEGORY:=Base system
   TITLE:=Utility for opening (analyzing) TRX firmware images
   MAINTAINER:=Rafał Miłecki <[email protected]>
-  DEPENDS:=@(TARGET_brcm47xx||TARGET_bcm53xx)
+  DEPENDS:=@(TARGET_bcm47xx||TARGET_bcm53xx)
 endef
 
 define Package/otrx/description

target/linux/brcm47xx/Makefile → target/linux/bcm47xx/Makefile

@@ -7,7 +7,7 @@
 include $(TOPDIR)/rules.mk
 
 ARCH:=mipsel
-BOARD:=brcm47xx
+BOARD:=bcm47xx
 BOARDNAME:=Broadcom BCM47xx/53xx (MIPS)
 FEATURES:=squashfs usb
 SUBTARGETS:=generic mips74k legacy

target/linux/brcm47xx/base-files/lib/preinit/01_sysinfo → target/linux/bcm47xx/base-files/lib/preinit/01_sysinfo

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-do_sysinfo_brcm47xx() {
+do_sysinfo_bcm47xx() {
 	local boardtype="$(nvram get boardtype)"
 	local boardnum="$(nvram get boardnum)"
 	local model="$(sed -ne 's/^machine[ \t]*: //p' /proc/cpuinfo)"
@@ -13,4 +13,4 @@ do_sysinfo_brcm47xx() {
 	echo "$model" > /tmp/sysinfo/model
 }
 
-boot_hook_add preinit_main do_sysinfo_brcm47xx
+boot_hook_add preinit_main do_sysinfo_bcm47xx

target/linux/brcm47xx/base-files/lib/upgrade/platform.sh → target/linux/bcm47xx/base-files/lib/upgrade/platform.sh

@@ -70,7 +70,7 @@ platform_expected_image() {
 	esac
 }
 
-brcm47xx_identify() {
+bcm47xx_identify() {
 	local magic
 
 	magic=$(get_magic_long "$1")
@@ -107,7 +107,7 @@ brcm47xx_identify() {
 platform_check_image() {
 	[ "$#" -gt 1 ] && return 1
 
-	local file_type=$(brcm47xx_identify "$1")
+	local file_type=$(bcm47xx_identify "$1")
 	local magic
 	local error=0
 
@@ -232,7 +232,7 @@ platform_trx_from_lxlold_cmd() {
 }
 
 platform_do_upgrade() {
-	local file_type=$(brcm47xx_identify "$1")
+	local file_type=$(bcm47xx_identify "$1")
 	local trx="$1"
 	local cmd=""
 

target/linux/brcm47xx/modules.mk → target/linux/bcm47xx/modules.mk

@@ -8,7 +8,7 @@
 define KernelPackage/bgmac
   TITLE:=Broadcom bgmac driver
   KCONFIG:=CONFIG_BGMAC CONFIG_BGMAC_BCMA
-  DEPENDS:=@TARGET_brcm47xx @!TARGET_brcm47xx_legacy
+  DEPENDS:=@TARGET_bcm47xx @!TARGET_bcm47xx_legacy
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   FILES:= \
 	$(LINUX_DIR)/drivers/net/ethernet/broadcom/bgmac-bcma.ko \

target/linux/brcm47xx/patches-4.14/831-old_gpio_wdt.patch → target/linux/bcm47xx/patches-4.14/831-old_gpio_wdt.patch

@@ -1,4 +1,4 @@
-This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
+This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
 
 Signed-off-by: Mathias Adam <[email protected]>
 

target/linux/brcm47xx/patches-4.19/831-old_gpio_wdt.patch → target/linux/bcm47xx/patches-4.19/831-old_gpio_wdt.patch

@@ -1,4 +1,4 @@
-This generic GPIO watchdog is used on Huawei E970 (brcm47xx)
+This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
 
 Signed-off-by: Mathias Adam <[email protected]>