uboot-mediatek: add basic build for ZBT-WG3526 (MT7621, 16M SPI-NOR)

Add basic U-Boot drop-in replacement compatible with the flash layout
of the vendor loader of the Zbtlink WG3526 (16M) MT7621 router board.
The idea here is a to have a reference build of uboot-mediatek also for
a simple MIPS boards more popular than MT7621 RFB.

Signed-off-by: Daniel Golle <[email protected]>

package/boot/uboot-mediatek/Makefile

@@ -75,6 +75,15 @@ define U-Boot/mt7621_nand_rfb
   UBOOT_IMAGE:=u-boot-mt7621.bin
 endef
 
+define U-Boot/mt7621_zbtlink_zbt-wg3526-16m
+  NAME:=Zbtlink ZBT-WG3526-16m
+  UBOOT_CONFIG:=mt7621_zbtlink_zbt-wg3526-16m
+  BUILD_DEVICES:=zbtlink_zbt-wg3526-16m
+  BUILD_TARGET:=ramips
+  BUILD_SUBTARGET:=mt7621
+  UBOOT_IMAGE:=u-boot-mt7621.bin
+endef
+
 define U-Boot/mt7622_rfb1
   NAME:=MT7622 Reference Board 1
   UBOOT_CONFIG:=mt7622_rfb
@@ -186,7 +195,7 @@ define U-Boot/mt7628_rfb
   UBOOT_IMAGE:=u-boot-with-spl.bin
 endef
 
-define U-Boot/ravpower_rp-wd009
+define U-Boot/mt7628_ravpower_rp-wd009
   NAME:=RAVPower RP-WD009
   BUILD_TARGET:=ramips
   BUILD_DEVICES:=ravpower_rp-wd009
@@ -557,6 +566,7 @@ UBOOT_TARGETS := \
 	mt7620_rfb \
 	mt7621_nand_rfb \
 	mt7621_rfb \
+	mt7621_zbtlink_zbt-wg3526-16m \
 	mt7622_bananapi_bpi-r64-emmc \
 	mt7622_bananapi_bpi-r64-sdmmc \
 	mt7622_bananapi_bpi-r64-snand \
@@ -568,7 +578,7 @@ UBOOT_TARGETS := \
 	mt7623n_bpir2 \
 	mt7623a_unielec_u7623 \
 	mt7628_rfb \
-	ravpower_rp-wd009 \
+	mt7628_ravpower_rp-wd009 \
 	mt7629_rfb \
 	mt7981_cmcc_rax3000m-emmc \
 	mt7981_cmcc_rax3000m-nand \

package/boot/uboot-mediatek/patches/421-zbtlink_zbt-wg3526-16m.patch

@@ -0,0 +1,314 @@
+--- /dev/null
++++ b/configs/mt7621_zbtlink_zbt-wg3526-16m_defconfig
+@@ -0,0 +1,138 @@
++CONFIG_MIPS=y
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_SYS_MALLOC_LEN=0x100000
++CONFIG_SPL_LIBCOMMON_SUPPORT=y
++CONFIG_SPL_LIBGENERIC_SUPPORT=y
++CONFIG_NR_DRAM_BANKS=1
++CONFIG_ENV_SIZE=0x1000
++CONFIG_ENV_IS_IN_MTD=y
++CONFIG_ENV_MTD_NAME="nor0"
++CONFIG_ENV_SIZE_REDUND=0x10000
++CONFIG_ENV_SIZE=0x10000
++CONFIG_ENV_OFFSET=0x30000
++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
++CONFIG_RESET_BUTTON_SETTLE_DELAY=400
++CONFIG_BOOTP_SEND_HOSTNAME=y
++# CONFIG_BOOTSTD is not set
++CONFIG_DEFAULT_ENV_FILE="zbtlink_zbt-wg3526-16m_env"
++CONFIG_DEFAULT_DEVICE_TREE="zbtlink,zbt-wg3526"
++CONFIG_SPL_BSS_MAX_SIZE=0x80000
++CONFIG_SPL_BSS_START_ADDR=0x80140000
++CONFIG_SPL_SERIAL=y
++CONFIG_SPL_SYS_MALLOC_F_LEN=0x40000
++CONFIG_SPL=y
++CONFIG_DEBUG_UART_BASE=0xbe000c00
++CONFIG_DEBUG_UART_CLOCK=50000000
++CONFIG_SYS_HAS_NONCACHED_MEMORY=y
++CONFIG_SYS_LOAD_ADDR=0x83000000
++CONFIG_SYS_MIPS_TIMER_FREQ=440000000
++CONFIG_ARCH_MTMIPS=y
++CONFIG_SOC_MT7621=y
++# CONFIG_MIPS_CACHE_SETUP is not set
++# CONFIG_MIPS_CACHE_DISABLE is not set
++CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
++CONFIG_MIPS_BOOT_FDT=y
++CONFIG_DEBUG_UART=y
++CONFIG_TPL_SYS_MALLOC_F_LEN=0x1000
++CONFIG_AUTOBOOT_KEYED=y
++CONFIG_BOOTDELAY=30
++CONFIG_AUTOBOOT_MENU_SHOW=y
++CONFIG_CFB_CONSOLE_ANSI=y
++CONFIG_BUTTON=y
++CONFIG_BUTTON_GPIO=y
++CONFIG_GPIO_HOG=y
++CONFIG_CMD_ENV_FLAGS=y
++CONFIG_FIT=y
++# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set
++CONFIG_HUSH_PARSER=y
++CONFIG_LOGLEVEL=6
++# CONFIG_LOG is not set
++# CONFIG_SYS_LONGHELP is not set
++# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
++CONFIG_SYS_CONSOLE_INFO_QUIET=y
++CONFIG_SPL_SYS_MALLOC_SIMPLE=y
++CONFIG_SPL_NOR_SUPPORT=y
++CONFIG_TPL=y
++# CONFIG_TPL_FRAMEWORK is not set
++CONFIG_LEGACY_IMAGE_FORMAT=y
++# CONFIG_BOOTM_NETBSD is not set
++# CONFIG_BOOTM_PLAN9 is not set
++# CONFIG_BOOTM_RTEMS is not set
++# CONFIG_BOOTM_VXWORKS is not set
++# CONFIG_EFI is not set
++# CONFIG_EFI_LOADER is not set
++CONFIG_CMD_BOOTMENU=y
++# CONFIG_CMD_BOOTEFI is not set
++# CONFIG_CMD_BOOTD is not set
++# CONFIG_CMD_BOOTP is not set
++CONFIG_CMD_BOOTM=y
++# CONFIG_CMD_BOOTDEV is not set
++# CONFIG_CMD_BOOTFLOW is not set
++CONFIG_CMD_BUTTON=y
++CONFIG_CMD_ECHO=y
++# CONFIG_CMD_ELF is not set
++# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
++CONFIG_CMD_ENV_READMEM=y
++CONFIG_CMD_ERASEENV=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_HASH=y
++CONFIG_CMD_ITEST=y
++CONFIG_CMD_LED=y
++# CONFIG_CMD_MBR is not set
++CONFIG_CMD_MMC=y
++CONFIG_CMD_MTD=y
++CONFIG_CMD_MTDPART=y
++# CONFIG_CMD_PCI is not set
++CONFIG_CMD_SF_TEST=y
++CONFIG_CMD_PING=y
++CONFIG_CMD_TFTPBOOT=y
++# CONFIG_CMD_UNLZ4 is not set
++CONFIG_CMD_ASKENV=y
++CONFIG_CMD_SETEXPR=y
++CONFIG_CMD_SLEEP=y
++CONFIG_CMD_SOURCE=y
++CONFIG_DOS_PARTITION=y
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_ISO_PARTITION is not set
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_PARTITION_TYPE_GUID=y
++CONFIG_SYS_RELOC_GD_ENV_ADDR=y
++# CONFIG_NET_RANDOM_ETHADDR is not set
++# CONFIG_I2C is not set
++# CONFIG_INPUT is not set
++CONFIG_MMC=y
++# CONFIG_MMC_QUIRKS is not set
++# CONFIG_MMC_HW_PARTITIONING is not set
++CONFIG_MMC_MTK=y
++CONFIG_MTD=y
++CONFIG_DM_MTD=y
++CONFIG_SF_DEFAULT_SPEED=20000000
++# CONFIG_SPI_FLASH_BAR is not set
++# CONFIG_SPI_FLASH_EON is not set
++# CONFIG_SPI_FLASH_GIGADEVICE is not set
++# CONFIG_SPI_FLASH_ISSI is not set
++# CONFIG_SPI_FLASH_MACRONIX is not set
++# CONFIG_SPI_FLASH_SPANSION is not set
++# CONFIG_SPI_FLASH_STMICRO is not set
++CONFIG_SPI_FLASH_WINBOND=y
++# CONFIG_SPI_FLASH_XMC is not set
++# CONFIG_SPI_FLASH_XTX is not set
++CONFIG_SPI_FLASH_MTD=y
++CONFIG_MEDIATEK_ETH=y
++CONFIG_PHY=y
++CONFIG_PHY_MTK_TPHY=y
++CONFIG_DEBUG_UART_SHIFT=2
++CONFIG_SPI=y
++CONFIG_MT7621_SPI=y
++CONFIG_SYSRESET=y
++CONFIG_SYSRESET_RESETCTL=y
++# CONFIG_SYS_XTRACE is not set
++CONFIG_USE_DEFAULT_ENV_FILE=y
++CONFIG_VERSION_VARIABLE=y
++CONFIG_WDT=y
++CONFIG_WDT_MT7621=y
++# CONFIG_BINMAN_FDT is not set
++CONFIG_LZMA=y
++CONFIG_SPL_LZMA=y
++# CONFIG_GZIP is not set
+--- /dev/null
++++ b/zbtlink_zbt-wg3526-16m_env
+@@ -0,0 +1,36 @@
++ethaddr_factory=mtd read factory $loadaddr 0x0 0x10000 ; setexpr macoffs $loadaddr + 0xe000 ; env readmem -b ethaddr $macoffs 0x6 ; setenv ethaddr_factory
++ipaddr=192.168.1.1
++serverip=192.168.1.254
++loadaddr=0x83000000
++bootcmd=run boot_nor
++bootdelay=0
++bootfile=openwrt-ramips-mt7621-zbtlink_zbt-wg3526-16m-initramfs-kernel.bin
++bootfile_uboot=u-boot-mt7621.bin
++bootfile_upg=openwrt-ramips-mt7621-zbtlink_zbt-wg3526-16m-squashfs-sysupgrade.bin
++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
++bootmenu_default=0
++bootmenu_delay=0
++bootmenu_title=      ( ( ( OpenWrt ) ) )
++bootmenu_0=Initialize environment.=run _firstboot
++bootmenu_0d=Run default boot command.=run boot_default
++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
++bootmenu_2=Boot system from flash.=run boot_nor ; run bootmenu_confirm_return
++bootmenu_3=Load system via TFTP then write to flash.=run boot_tftp_sysupgrade ; run bootmenu_confirm_return
++bootmenu_4=Load U-Boot via TFTP then write to flash.=run boot_tftp_write_uboot ; run bootmenu_confirm_return
++bootmenu_5=Reset all settings to factory defaults.=run reset_factory ; reset
++bootmenu_6=Reboot.=reset
++boot_first=if button reset ; then run boot_tftp ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_tftp_forever
++boot_nor=bootm 0x1fc50000
++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
++boot_tftp_forever=while true ; do run boot_tftp ; sleep 1 ; done
++boot_tftp_sysupgrade=tftpboot $loadaddr $bootfile_upg && iminfo $loadaddr && run nor_write_production
++boot_tftp_write_uboot=tftpboot $loadaddr $bootfile_uboot && run nor_write_uboot
++reset_factory=mtd erase u-boot-env 0x0 0x10000 && reset
++nor_pad_size=setexpr image_eb $filesize / 0x1000 ; setexpr tmp1 image_size % 0x1000 ; test 0x$tmp1 -gt 0 && setexpr image_eb $image_eb + 1 ; setexpr image_eb $image_eb * 0x1000
++nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0xfb0000 && mtd erase firmware 0x0 0x$image_eb && mtd write firmware $loadaddr 0x0 $filesize
++nor_write_uboot=mtd erase u-boot 0x0 0x30000 && mtd write u-boot $loadaddr 0x0 0x30000
++_init_env=setenv _init_env ; saveenv
++_firstboot=setenv _firstboot ; run _switch_to_menu ; run ethaddr_factory ; run _init_env ; run boot_first
++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       $ver"
+--- /dev/null
++++ b/arch/mips/dts/zbtlink,zbt-wg3526.dts
+@@ -0,0 +1,131 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2022 MediaTek Inc. All rights reserved.
++ *
++ * Author: Weijie Gao <[email protected]>
++ */
++
++/dts-v1/;
++
++#include "mt7621.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++	compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-rfb", "mediatek,mt7621-soc";
++	model = "Zbtlink WG3526";
++
++	aliases {
++		ethernet0 = &eth;
++		serial0 = &uart0;
++		spi0 = &spi;
++	};
++
++	chosen {
++		stdout-path = &uart0;
++	};
++
++	keys {
++		compatible = "gpio-keys";
++
++		reset {
++			label = "reset";
++			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led_status: status {
++			label = "green:status";
++			gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
++		};
++	};
++};
++
++&pinctrl {
++	state_default: pin_state {
++		gpios {
++			groups = "i2c", "uart3", "pcie reset";
++			function = "gpio";
++		};
++
++		wdt {
++			groups = "wdt";
++			function = "wdt rst";
++		};
++
++		jtag {
++			groups = "jtag";
++			function = "jtag";
++		};
++	};
++};
++
++&uart0 {
++	status = "okay";
++};
++
++&gpio {
++	status = "okay";
++};
++
++&spi {
++	status = "okay";
++	num-cs = <2>;
++
++	spi-flash@0 {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		compatible = "jedec,spi-nor";
++		spi-max-frequency = <25000000>;
++		reg = <0>;
++
++
++		partitions {
++			compatible = "fixed-partitions";
++			#address-cells = <1>;
++			#size-cells = <1>;
++
++			partition@0 {
++				label = "u-boot";
++				reg = <0x0 0x30000>;
++			};
++
++			partition@30000 {
++				label = "u-boot-env";
++				reg = <0x30000 0x10000>;
++			};
++
++			factory: partition@40000 {
++				label = "factory";
++				reg = <0x40000 0x10000>;
++				read-only;
++			};
++
++			firmware: partition@50000 {
++				compatible = "denx,uimage";
++				label = "firmware";
++				reg = <0x50000 0xfb0000>;
++			};
++		};
++	};
++};
++
++&eth {
++	status = "okay";
++};
++
++&mmc {
++	cap-sd-highspeed;
++
++	status = "okay";
++};
++
++&ssusb {
++	status = "okay";
++};
++
++&u3phy {
++	status = "okay";
++};