refresh ixp4xx patches to match upstream style

SVN-Revision: 11297

target/linux/ixp4xx/patches-2.6.25/010-rtc_isl1208_new_style.patch

@@ -2,10 +2,8 @@
  drivers/rtc/rtc-isl1208.c |  357 +++++++++++++++++++++-------------------------
  1 file changed, 170 insertions(+), 187 deletions(-)
 
-Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/rtc/rtc-isl1208.c
-+++ linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
+--- a/drivers/rtc/rtc-isl1208.c
++++ b/drivers/rtc/rtc-isl1208.c
 @@ -15,16 +15,15 @@
  #include <linux/bcd.h>
  #include <linux/rtc.h>
@@ -93,7 +91,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  	BUG_ON(reg > ISL1208_REG_USR2);
  	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
  
-@@ -103,15 +84,14 @@ isl1208_i2c_read_regs(struct i2c_client 
+@@ -103,15 +84,14 @@
  /* block write */
  static int
  isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
@@ -111,7 +109,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  	BUG_ON(reg > ISL1208_REG_USR2);
  	BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
  
-@@ -125,7 +105,8 @@ isl1208_i2c_set_regs(struct i2c_client *
+@@ -125,7 +105,8 @@
  }
  
  /* simple check to see wether we have a isl1208 */
@@ -121,7 +119,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  {
  	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
  	u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
-@@ -139,24 +120,29 @@ static int isl1208_i2c_validate_client(s
+@@ -139,24 +120,29 @@
  		return ret;
  
  	for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
@@ -157,7 +155,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  
  	/* The 6bit value in the ATR register controls the load
  	 * capacitance C_load * in steps of 0.25pF
-@@ -169,51 +155,54 @@ static int isl1208_i2c_get_atr(struct i2
+@@ -169,51 +155,54 @@
  	 *
  	 */
  
@@ -225,7 +223,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  {
  	struct i2c_client *const client = to_i2c_client(dev);
  	int sr, dtr, atr, usr;
-@@ -230,20 +219,19 @@ static int isl1208_rtc_proc(struct devic
+@@ -230,20 +219,19 @@
  		   (sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
  		   (sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
  		   (sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
@@ -249,7 +247,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  
  	usr = isl1208_i2c_get_usr(client);
  	if (usr >= 0)
-@@ -252,9 +240,8 @@ static int isl1208_rtc_proc(struct devic
+@@ -252,9 +240,8 @@
  	return 0;
  }
  
@@ -261,7 +259,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  {
  	int sr;
  	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
-@@ -274,27 +261,30 @@ static int isl1208_i2c_read_time(struct 
+@@ -274,27 +261,30 @@
  
  	tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
  	tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
@@ -299,7 +297,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  {
  	struct rtc_time *const tm = &alarm->time;
  	u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
-@@ -307,7 +297,7 @@ static int isl1208_i2c_read_alarm(struct
+@@ -307,7 +297,7 @@
  	}
  
  	sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
@@ -308,7 +306,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  	if (sr < 0) {
  		dev_err(&client->dev, "%s: reading alarm section failed\n",
  			__func__);
-@@ -315,23 +305,25 @@ static int isl1208_i2c_read_alarm(struct
+@@ -315,23 +305,25 @@
  	}
  
  	/* MSB of each alarm register is an enable bit */
@@ -343,7 +341,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  {
  	int sr;
  	u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
-@@ -353,7 +345,7 @@ static int isl1208_i2c_set_time(struct i
+@@ -353,7 +345,7 @@
  	}
  
  	/* set WRTC */
@@ -352,7 +350,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  				       sr | ISL1208_REG_SR_WRTC);
  	if (sr < 0) {
  		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
-@@ -369,7 +361,7 @@ static int isl1208_i2c_set_time(struct i
+@@ -369,7 +361,7 @@
  	}
  
  	/* clear WRTC again */
@@ -361,7 +359,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  				       sr & ~ISL1208_REG_SR_WRTC);
  	if (sr < 0) {
  		dev_err(&client->dev, "%s: writing SR failed\n", __func__);
-@@ -380,70 +372,69 @@ static int isl1208_i2c_set_time(struct i
+@@ -380,70 +372,69 @@
  }
  
  
@@ -460,7 +458,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
  {
  	int usr = -1;
  
-@@ -460,124 +451,116 @@ static ssize_t isl1208_sysfs_store_usr(s
+@@ -460,124 +451,116 @@
  
  	return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
  }

target/linux/ixp4xx/patches-2.6.25/011-rtc_pcf8563_new_style.patch

@@ -2,10 +2,8 @@
  drivers/rtc/rtc-pcf8563.c |  109 +++++++++++++---------------------------------
  1 file changed, 32 insertions(+), 77 deletions(-)
 
-Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/rtc/rtc-pcf8563.c
-+++ linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
+--- a/drivers/rtc/rtc-pcf8563.c
++++ b/drivers/rtc/rtc-pcf8563.c
 @@ -18,17 +18,7 @@
  #include <linux/bcd.h>
  #include <linux/rtc.h>
@@ -25,7 +23,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
  
  #define PCF8563_REG_ST1		0x00 /* status */
  #define PCF8563_REG_ST2		0x01
-@@ -53,8 +43,10 @@ I2C_CLIENT_INSMOD;
+@@ -53,8 +43,10 @@
  #define PCF8563_SC_LV		0x80 /* low voltage */
  #define PCF8563_MO_C		0x80 /* century */
  
@@ -37,7 +35,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
  	/*
  	 * The meaning of MO_C bit varies by the chip type.
  	 * From PCF8563 datasheet: this bit is toggled when the years
-@@ -72,16 +64,13 @@ struct pcf8563 {
+@@ -72,16 +64,13 @@
  	int c_polarity;	/* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
  };
  
@@ -55,7 +53,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
  	unsigned char buf[13] = { PCF8563_REG_ST1 };
  
  	struct i2c_msg msgs[] = {
-@@ -138,7 +127,7 @@ static int pcf8563_get_datetime(struct i
+@@ -138,7 +127,7 @@
  
  static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
  {
@@ -64,7 +62,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
  	int i, err;
  	unsigned char buf[9];
  
-@@ -257,100 +246,66 @@ static const struct rtc_class_ops pcf856
+@@ -257,100 +246,66 @@
  	.set_time	= pcf8563_rtc_set_time,
  };
  

target/linux/ixp4xx/patches-2.6.25/012-rtc_x1205_new_style.patch

@@ -2,10 +2,8 @@
  drivers/rtc/rtc-x1205.c |  128 ++++++++++++++++--------------------------------
  1 file changed, 43 insertions(+), 85 deletions(-)
 
-Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/rtc/rtc-x1205.c
-+++ linux-2.6.25.4/drivers/rtc/rtc-x1205.c
+--- a/drivers/rtc/rtc-x1205.c
++++ b/drivers/rtc/rtc-x1205.c
 @@ -22,20 +22,7 @@
  #include <linux/rtc.h>
  #include <linux/delay.h>
@@ -28,7 +26,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
  
  /* offsets into CCR area */
  
-@@ -91,19 +78,7 @@ I2C_CLIENT_INSMOD;
+@@ -91,19 +78,7 @@
  
  #define X1205_HR_MIL		0x80	/* Set in ccr.hour for 24 hr mode */
  
@@ -49,7 +47,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
  
  /*
   * In the routines that deal directly with the x1205 hardware, we use
-@@ -497,58 +472,51 @@ static ssize_t x1205_sysfs_show_dtrim(st
+@@ -497,58 +472,51 @@
  }
  static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
  
@@ -135,7 +133,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
  
  	i2c_set_clientdata(client, rtc);
  
-@@ -565,45 +533,35 @@ static int x1205_probe(struct i2c_adapte
+@@ -565,45 +533,35 @@
  	else
  		dev_err(&client->dev, "couldn't read status\n");
  

target/linux/ixp4xx/patches-2.6.25/030-ixp4xx_fsg_board_support.patch

@@ -45,11 +45,9 @@ now calls machine_restart() directly.
  create mode 100644 arch/arm/mach-ixp4xx/fsg-setup.c
  create mode 100644 include/asm-arm/arch-ixp4xx/fsg.h
 
-Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/configs/ixp4xx_defconfig
-+++ linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
-@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -165,6 +165,7 @@
  CONFIG_MACH_NAS100D=y
  CONFIG_MACH_DSMG600=y
  CONFIG_ARCH_IXDP4XX=y
@@ -57,7 +55,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
  CONFIG_CPU_IXP46X=y
  CONFIG_CPU_IXP43X=y
  CONFIG_MACH_GTWX5715=y
-@@ -770,7 +771,7 @@ CONFIG_ATA=y
+@@ -770,7 +771,7 @@
  # CONFIG_SATA_SIL24 is not set
  # CONFIG_SATA_SIS is not set
  # CONFIG_SATA_ULI is not set
@@ -66,7 +64,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
  # CONFIG_SATA_VITESSE is not set
  # CONFIG_SATA_INIC162X is not set
  # CONFIG_PATA_ALI is not set
-@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
+@@ -1143,7 +1144,7 @@
  # CONFIG_SENSORS_VIA686A is not set
  # CONFIG_SENSORS_VT1211 is not set
  # CONFIG_SENSORS_VT8231 is not set
@@ -75,7 +73,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
  # CONFIG_SENSORS_W83791D is not set
  # CONFIG_SENSORS_W83792D is not set
  # CONFIG_SENSORS_W83793 is not set
-@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
+@@ -1334,8 +1335,8 @@
  #
  # LED drivers
  #
@@ -85,7 +83,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
  
  #
  # LED Triggers
-@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
+@@ -1367,7 +1368,7 @@
  # CONFIG_RTC_DRV_DS1672 is not set
  # CONFIG_RTC_DRV_MAX6900 is not set
  # CONFIG_RTC_DRV_RS5C372 is not set
@@ -94,11 +92,9 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
  CONFIG_RTC_DRV_X1205=y
  CONFIG_RTC_DRV_PCF8563=y
  # CONFIG_RTC_DRV_PCF8583 is not set
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -125,6 +125,15 @@ config	ARCH_IXDP4XX
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -125,6 +125,15 @@
  	depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
  	default y
  
@@ -114,11 +110,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  #
  # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
  #
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D)		+= nas10
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -15,6 +15,7 @@
  obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
  obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
  obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
@@ -126,7 +120,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-y	+= common.o
  
-@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D)	+= nas100d-se
+@@ -28,6 +29,7 @@
  obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
  obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
  obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
@@ -134,10 +128,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-pci.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-pci.c
++++ b/arch/arm/mach-ixp4xx/fsg-pci.c
 @@ -0,0 +1,71 @@
 +/*
 + * arch/arch/mach-ixp4xx/fsg-pci.c
@@ -210,10 +202,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-pci.c
 +}
 +
 +subsys_initcall(fsg_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-setup.c
++++ b/arch/arm/mach-ixp4xx/fsg-setup.c
 @@ -0,0 +1,276 @@
 +/*
 + * arch/arm/mach-ixp4xx/fsg-setup.c
@@ -491,10 +481,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-setup.c
 +	.init_machine	= fsg_init,
 +MACHINE_END
 +
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/fsg.h
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/fsg.h
++++ b/include/asm-arm/arch-ixp4xx/fsg.h
 @@ -0,0 +1,50 @@
 +/*
 + * include/asm-arm/arch-ixp4xx/fsg.h
@@ -546,10 +534,8 @@ Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/fsg.h
 +#define FSG_LED_USB_BIT		4
 +#define FSG_LED_RING_BIT	5
 +#define FSG_LED_SYNC_BIT	7
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
++++ b/include/asm-arm/arch-ixp4xx/hardware.h
 @@ -45,5 +45,6 @@
  #include "nslu2.h"
  #include "nas100d.h"
@@ -557,10 +543,8 @@ Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
 +#include "fsg.h"
  
  #endif  /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/irqs.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/irqs.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/irqs.h
+--- a/include/asm-arm/arch-ixp4xx/irqs.h
++++ b/include/asm-arm/arch-ixp4xx/irqs.h
 @@ -128,4 +128,11 @@
  #define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
  #define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6

target/linux/ixp4xx/patches-2.6.25/031-ixp4xx_fsg_led_driver.patch

@@ -18,11 +18,9 @@ KernelVersion: v2.6.25-rc6-117-g457fb60
  3 files changed, 268 insertions(+), 0 deletions(-)
  create mode 100644 drivers/leds/leds-fsg.c
 
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -46,6 +46,12 @@ config LEDS_SPITZ
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -46,6 +46,12 @@
  	  This option enables support for the LEDs on Sharp Zaurus
  	  SL-Cxx00 series (C1000, C3000, C3100).
  
@@ -35,11 +33,9 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig
  config LEDS_TOSA
  	tristate "LED Support for the Sharp SL-6000 series"
  	depends on LEDS_CLASS && PXA_SHARPSL
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -22,6 +22,7 @@
  obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
  obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
  obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
@@ -47,10 +43,8 @@ Index: linux-2.6.25.4/drivers/leds/Makefile
  
  # LED Triggers
  obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
-Index: linux-2.6.25.4/drivers/leds/leds-fsg.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/drivers/leds/leds-fsg.c
++++ b/drivers/leds/leds-fsg.c
 @@ -0,0 +1,261 @@
 +/*
 + * LED Driver for the Freecom FSG-3

target/linux/ixp4xx/patches-2.6.25/090-increase_entropy_pools.patch

@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/char/random.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/char/random.c
-+++ linux-2.6.25.4/drivers/char/random.c
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
 @@ -248,9 +248,9 @@
  /*
   * Configuration information

target/linux/ixp4xx/patches-2.6.25/100-gateway7001_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device gateway700
+--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
++++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
+@@ -76,9 +76,36 @@
  	.resource	= &gateway7001_uart_resource,
  };
  

target/linux/ixp4xx/patches-2.6.25/101-wg302_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v2-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v2_ua
+--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
+@@ -77,9 +77,27 @@
  	.resource	= &wg302v2_uart_resource,
  };
  

target/linux/ixp4xx/patches-2.6.25/110-pronghorn_metro_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -57,6 +57,14 @@ config MACH_WG302V2
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -57,6 +57,14 @@
  	  WG302 v2 or WAG302 v2 Access Points. For more information
  	  on this platform, see http://openwrt.org
  
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config ARCH_IXDP425
  	bool "IXDP425"
  	help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg6
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -16,6 +16,7 @@
  obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
  obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
  obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-y	+= common.o
  
-@@ -30,6 +31,7 @@ obj-$(CONFIG_MACH_DSMG600)      += dsmg6
+@@ -30,6 +31,7 @@
  obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
  obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
  obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
++++ b/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
 @@ -0,0 +1,74 @@
 +/*
 + * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
@@ -116,10 +110,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
 +}
 +
 +subsys_initcall(pronghornmetro_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
++++ b/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
 @@ -0,0 +1,147 @@
 +/*
 + * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
@@ -268,11 +260,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
 +	.init_machine	= pronghornmetro_init,
 +MACHINE_END
 +#endif
-Index: linux-2.6.25.4/Documentation/arm/IXP4xx
-===================================================================
---- linux-2.6.25.4.orig/Documentation/arm/IXP4xx
-+++ linux-2.6.25.4/Documentation/arm/IXP4xx
-@@ -111,6 +111,9 @@ http://www.adiengineering.com/productsCo
+--- a/Documentation/arm/IXP4xx
++++ b/Documentation/arm/IXP4xx
+@@ -111,6 +111,9 @@
     the platform has two mini-PCI slots used for 802.11[bga] cards.
     Finally, there is an IDE port hanging off the expansion bus.
  
@@ -282,11 +272,9 @@ Index: linux-2.6.25.4/Documentation/arm/IXP4xx
  Gateworks Avila Network Platform
  http://www.gateworks.com/avila_sbc.htm
  
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_set
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -41,7 +41,8 @@
  	 * Some boards are using UART2 as console
  	 */
  	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||

target/linux/ixp4xx/patches-2.6.25/111-pronghorn_metro_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -104,9 +104,36 @@ static struct platform_device pronghornm
+--- a/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
++++ b/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+@@ -104,9 +104,36 @@
  	.resource		= pronghornmetro_pata_resources,
  };
  

target/linux/ixp4xx/patches-2.6.25/120-compex_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -65,6 +65,14 @@
  	  Engineering Pronghorn Metro Platform. For more
  	  information on this platform, see <file:Documentation/arm/IXP4xx>.
  
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config ARCH_IXDP425
  	bool "IXDP425"
  	help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= ga
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -17,6 +17,7 @@
  obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
  obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
  obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-y	+= common.o
  
-@@ -32,6 +33,7 @@ obj-$(CONFIG_MACH_GATEWAY7001)	+= gatewa
+@@ -32,6 +33,7 @@
  obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
  obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
  obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
++++ b/arch/arm/mach-ixp4xx/compex-setup.c
 @@ -0,0 +1,120 @@
 +/*
 + * arch/arm/mach-ixp4xx/compex-setup.c
@@ -162,11 +156,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
 +	.init_machine	= compex_init,
 +MACHINE_END
 +#endif
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -66,7 +66,7 @@
  int __init ixdp425_pci_init(void)
  {
  	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
@@ -175,11 +167,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
  		pci_common_init(&ixdp425_pci);
  	return 0;
  }
-Index: linux-2.6.25.4/arch/arm/tools/mach-types
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/tools/mach-types
-+++ linux-2.6.25.4/arch/arm/tools/mach-types
-@@ -1276,7 +1276,7 @@ oiab			MACH_OIAB		OIAB			1269
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -1276,7 +1276,7 @@
  smdk6400		MACH_SMDK6400		SMDK6400		1270
  nokia_n800		MACH_NOKIA_N800		NOKIA_N800		1271
  greenphone		MACH_GREENPHONE		GREENPHONE		1272

target/linux/ixp4xx/patches-2.6.25/121-compex_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/compex-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -90,9 +90,36 @@ static struct platform_device compex_uar
+--- a/arch/arm/mach-ixp4xx/compex-setup.c
++++ b/arch/arm/mach-ixp4xx/compex-setup.c
+@@ -90,9 +90,36 @@
  	.resource		= compex_uart_resources,
  };
  

target/linux/ixp4xx/patches-2.6.25/130-wrt300nv2_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -73,6 +73,14 @@ config MACH_COMPEX
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -73,6 +73,14 @@
  	  WP18 or NP18A boards. For more information on this
  	  platform, see http://openwrt.org
  
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config ARCH_IXDP425
  	bool "IXDP425"
  	help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -18,6 +18,7 @@
  obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
  obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
  obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-y	+= common.o
  
-@@ -34,6 +35,7 @@ obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-se
+@@ -34,6 +35,7 @@
  obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
  obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
  obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
 @@ -0,0 +1,65 @@
 +/*
 + * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
@@ -107,10 +101,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
 +}
 +
 +subsys_initcall(wrt300nv2_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
 @@ -0,0 +1,108 @@
 +/*
 + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -220,11 +212,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
 +	.init_machine	= wrt300nv2_init,
 +MACHINE_END
 +#endif
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,7 @@ static __inline__ void __arch_decomp_set
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -42,7 +42,7 @@
  	 */
  	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
  			 machine_is_gateway7001() || machine_is_wg302v2() ||

target/linux/ixp4xx/patches-2.6.25/131-wrt300nv2_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device wrt300nv2_
+--- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -76,9 +76,36 @@
  	.resource	= &wrt300nv2_uart_resource,
  };
  

target/linux/ixp4xx/patches-2.6.25/140-sidewinder_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -65,6 +65,14 @@
  	  Engineering Pronghorn Metro Platform. For more
  	  information on this platform, see <file:Documentation/arm/IXP4xx>.
  
@@ -17,7 +15,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config MACH_COMPEX
  	bool "Compex WP18 / NP18A"
  	select PCI
-@@ -163,7 +171,7 @@ config MACH_FSG
+@@ -163,7 +171,7 @@
  #
  config CPU_IXP46X
  	bool
@@ -26,11 +24,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  	default y
  
  config CPU_IXP43X
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -19,6 +19,7 @@
  obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
  obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
  obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
@@ -38,7 +34,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-y	+= common.o
  
-@@ -36,6 +37,7 @@ obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
+@@ -36,6 +37,7 @@
  obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
  obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
  obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
@@ -46,10 +42,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-pci.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-pci.c
++++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
 @@ -0,0 +1,71 @@
 +/*
 + * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
@@ -122,10 +116,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-pci.c
 +}
 +
 +subsys_initcall(sidewinder_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-setup.c
++++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
 @@ -0,0 +1,115 @@
 +/*
 + * arch/arm/mach-ixp4xx/sidewinder-setup.c

target/linux/ixp4xx/patches-2.6.25/150-lanready_ap1000_support.patch

@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
 @@ -0,0 +1,151 @@
 +/*
 + * arch/arm/mach-ixp4xx/ap1000-setup.c
@@ -154,11 +152,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
 +	.init_machine	= ap1000_init,
 +MACHINE_END
 +#endif
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,8 @@ struct hw_pci ixdp425_pci __initdata = {
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -66,7 +66,8 @@
  int __init ixdp425_pci_init(void)
  {
  	if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
@@ -168,11 +164,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
  		pci_common_init(&ixdp425_pci);
  	return 0;
  }
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,14 @@ config MACH_WRT300NV2
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -89,6 +89,14 @@
  	  WRT300N v2 router. For more information on this
  	  platform, see http://openwrt.org
  
@@ -187,11 +181,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config ARCH_IXDP425
  	bool "IXDP425"
  	help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+=
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -20,6 +20,7 @@
  obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp425-pci.o
  obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
  obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
@@ -199,7 +191,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-y	+= common.o
  
-@@ -38,6 +39,7 @@ obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pro
+@@ -38,6 +39,7 @@
  obj-$(CONFIG_MACH_COMPEX)	+= compex-setup.o
  obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
  obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o

target/linux/ixp4xx/patches-2.6.25/151-lanready_ap1000_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -90,9 +90,37 @@ static struct platform_device ap1000_uar
+--- a/arch/arm/mach-ixp4xx/ap1000-setup.c
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
+@@ -90,9 +90,37 @@
  	.resource		= ap1000_uart_resources
  };
  

target/linux/ixp4xx/patches-2.6.25/160-wg302v1_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -49,6 +49,14 @@
  	  7001 Access Point. For more information on this platform,
  	  see http://openwrt.org
  
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config MACH_WG302V2
  	bool "Netgear WG302 v2 / WAG302 v2"
  	select PCI
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-p
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -14,6 +14,7 @@
  obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
  obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
  obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  obj-pci-$(CONFIG_MACH_WG302V2)		+= wg302v2-pci.o
  obj-pci-$(CONFIG_MACH_FSG)		+= fsg-pci.o
  obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-pci.o
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.
+@@ -33,6 +34,7 @@
  obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
  obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
  obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  obj-$(CONFIG_MACH_WG302V2)	+= wg302v2-setup.o
  obj-$(CONFIG_MACH_FSG)		+= fsg-setup.o
  obj-$(CONFIG_MACH_PRONGHORNMETRO)	+= pronghornmetro-setup.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-pci.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-pci.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
 @@ -0,0 +1,63 @@
 +/*
 + * arch/arch/mach-ixp4xx/wg302v1-pci.c
@@ -105,10 +99,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-pci.c
 +}
 +
 +subsys_initcall(wg302v1_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
 @@ -0,0 +1,109 @@
 +/*
 + * arch/arm/mach-ixp4xx/wg302v1-setup.c

target/linux/ixp4xx/patches-2.6.25/161-wg302v1_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v1_ua
+--- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -77,9 +77,27 @@
  	.resource	= &wg302v1_uart_resource,
  };
  

target/linux/ixp4xx/patches-2.6.25/162-wg302v1_mem_fixup.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -100,6 +100,36 @@ static struct platform_device *wg302v1_d
+--- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -100,6 +100,36 @@
  	&wg302_eth[0],
  };
  
@@ -39,7 +37,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
  static void __init wg302v1_init(void)
  {
  	ixp4xx_sys_init();
-@@ -118,6 +148,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
+@@ -118,6 +148,7 @@
  	/* Maintainer: Imre Kaloz <[email protected]> */
  	.phys_io	= IXP4XX_PERIPHERAL_BASE_PHYS,
  	.io_pg_offst	= ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,

target/linux/ixp4xx/patches-2.6.25/170-ixdpg425_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/coyote-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -73,9 +73,37 @@ static struct platform_device coyote_uar
+--- a/arch/arm/mach-ixp4xx/coyote-setup.c
++++ b/arch/arm/mach-ixp4xx/coyote-setup.c
+@@ -73,9 +73,37 @@
  	.resource	= &coyote_uart_resource,
  };
  

target/linux/ixp4xx/patches-2.6.25/180-tw5334_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -150,6 +150,14 @@ config ARCH_PRPMC1100
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -150,6 +150,14 @@
  	  PrPCM1100 Processor Mezanine Module. For more information on
  	  this platform, see <file:Documentation/arm/IXP4xx>.
  
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config MACH_NAS100D
  	bool
  	prompt "NAS100D"
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_COMPEX)		+= ixdp42
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -22,6 +22,7 @@
  obj-pci-$(CONFIG_MACH_WRT300NV2)		+= wrt300nv2-pci.o
  obj-pci-$(CONFIG_MACH_SIDEWINDER)		+= sidewinder-pci.o
  obj-pci-$(CONFIG_MACH_AP1000)		+= ixdp425-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-y	+= common.o
  
-@@ -42,6 +43,7 @@ obj-$(CONFIG_MACH_COMPEX)	+= compex-setu
+@@ -42,6 +43,7 @@
  obj-$(CONFIG_MACH_WRT300NV2)	+= wrt300nv2-setup.o
  obj-$(CONFIG_MACH_SIDEWINDER)	+= sidewinder-setup.o
  obj-$(CONFIG_MACH_AP1000)	+= ap1000-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  
  obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
  obj-$(CONFIG_IXP4XX_QMGR)	+= ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-setup.c
++++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
 @@ -0,0 +1,162 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw5334-setup.c
@@ -204,10 +198,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-setup.c
 +	.init_machine	= tw5334_init,
 +MACHINE_END
 +#endif
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-pci.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-pci.c
++++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
 @@ -0,0 +1,69 @@
 +/*
 + * arch/arch/mach-ixp4xx/tw5334-pci.c
@@ -278,11 +270,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-pci.c
 +}
 +
 +subsys_initcall(tw5334_pci_init);
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -42,7 +42,8 @@
  	 */
  	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
  			 machine_is_gateway7001() || machine_is_wg302v2() ||

target/linux/ixp4xx/patches-2.6.25/190-cambria_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -25,6 +25,14 @@ config MACH_AVILA
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -25,6 +25,14 @@
  	  Avila Network Platform. For more information on this platform,
  	  see <file:Documentation/arm/IXP4xx>.
  
@@ -17,7 +15,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  config MACH_LOFT
      bool "Loft"
      depends on MACH_AVILA
-@@ -200,7 +208,7 @@ config CPU_IXP46X
+@@ -200,7 +208,7 @@
  
  config CPU_IXP43X
  	bool
@@ -26,11 +24,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
  	default y
  
  config MACH_GTWX5715
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n	:=
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -7,6 +7,7 @@
  
  obj-pci-$(CONFIG_ARCH_IXDP4XX)		+= ixdp425-pci.o
  obj-pci-$(CONFIG_MACH_AVILA)		+= avila-pci.o
@@ -38,7 +34,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
  obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
  obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
-@@ -28,6 +29,7 @@ obj-y	+= common.o
+@@ -28,6 +29,7 @@
  
  obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-setup.o
  obj-$(CONFIG_MACH_AVILA)	+= avila-setup.o
@@ -46,10 +42,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
  obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
  obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
  obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-pci.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-pci.c
++++ b/arch/arm/mach-ixp4xx/cambria-pci.c
 @@ -0,0 +1,74 @@
 +/*
 + * arch/arch/mach-ixp4xx/cambria-pci.c
@@ -125,10 +119,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-pci.c
 +}
 +
 +subsys_initcall(cambria_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-setup.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-setup.c
++++ b/arch/arm/mach-ixp4xx/cambria-setup.c
 @@ -0,0 +1,444 @@
 +/*
 + * arch/arm/mach-ixp4xx/cambria-setup.c
@@ -574,10 +566,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-setup.c
 +	.init_machine	= cambria_init,
 +MACHINE_END
 +#endif
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
++++ b/include/asm-arm/arch-ixp4xx/hardware.h
 @@ -18,7 +18,7 @@
  #define __ASM_ARCH_HARDWARE_H__
  

target/linux/ixp4xx/patches-2.6.25/200-npe_driver.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/arm/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/Kconfig
-+++ linux-2.6.25.4/drivers/net/arm/Kconfig
-@@ -47,3 +47,11 @@ config EP93XX_ETH
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
+@@ -47,3 +47,11 @@
  	help
  	  This is a driver for the ethernet hardware included in EP93xx CPUs.
  	  Say Y if you are building a kernel for EP93xx based devices.
@@ -14,19 +12,15 @@ Index: linux-2.6.25.4/drivers/net/arm/Kconfig
 +	help
 +	  Say Y here if you want to use built-in Ethernet ports
 +	  on IXP4xx processor.
-Index: linux-2.6.25.4/drivers/net/arm/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/Makefile
-+++ linux-2.6.25.4/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
+--- a/drivers/net/arm/Makefile
++++ b/drivers/net/arm/Makefile
+@@ -9,3 +9,4 @@
  obj-$(CONFIG_ARM_ETHER1)	+= ether1.o
  obj-$(CONFIG_ARM_AT91_ETHER)	+= at91_ether.o
  obj-$(CONFIG_EP93XX_ETH)	+= ep93xx_eth.o
 +obj-$(CONFIG_IXP4XX_ETH)	+= ixp4xx_eth.o
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
 @@ -0,0 +1,1265 @@
 +/*
 + * Intel IXP4xx Ethernet driver for Linux
@@ -1293,11 +1287,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
 +MODULE_ALIAS("platform:ixp4xx_eth");
 +module_init(eth_init_module);
 +module_exit(eth_cleanup_module);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -448,7 +448,9 @@ int npe_send_message(struct npe *npe, co
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -448,7 +448,9 @@
  		return -ETIMEDOUT;
  	}
  
@@ -1307,7 +1299,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
  	return 0;
  }
  
-@@ -484,7 +486,9 @@ int npe_recv_message(struct npe *npe, vo
+@@ -484,7 +486,9 @@
  		return -ETIMEDOUT;
  	}
  
@@ -1317,11 +1309,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
  	return 0;
  }
  
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-@@ -184,6 +184,8 @@ void qmgr_release_queue(unsigned int que
+--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+@@ -184,6 +184,8 @@
  	case 3: mask[0] = 0xFF; break;
  	}
  

target/linux/ixp4xx/patches-2.6.25/201-npe_driver_print_license_location.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -592,6 +592,8 @@ int npe_load_firmware(struct npe *npe, c
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -592,6 +592,8 @@
  	npe_reset(npe);
  #endif
  

target/linux/ixp4xx/patches-2.6.25/202-npe_driver_switch_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-@@ -165,14 +165,15 @@ struct port {
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -165,14 +165,15 @@
  	struct net_device *netdev;
  	struct napi_struct napi;
  	struct net_device_stats stat;
@@ -20,7 +18,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  };
  
  /* NPE message structure */
-@@ -316,12 +317,13 @@ static void mdio_write(struct net_device
+@@ -316,12 +317,13 @@
  	spin_unlock_irqrestore(&mdio_lock, flags);
  }
  
@@ -36,7 +34,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  
  	while (cycles < MAX_MII_RESET_RETRIES) {
  		if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-@@ -335,12 +337,12 @@ static void phy_reset(struct net_device 
+@@ -335,12 +337,12 @@
  		cycles++;
  	}
  
@@ -52,7 +50,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  		__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
  			     &port->regs->tx_control[0]);
  	else
-@@ -348,7 +350,7 @@ static void eth_set_duplex(struct port *
+@@ -348,7 +350,7 @@
  			     &port->regs->tx_control[0]);
  }
  
@@ -61,7 +59,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  static void phy_check_media(struct port *port, int init)
  {
  	if (mii_check_media(&port->mii, 1, init))
-@@ -367,7 +369,63 @@ static void phy_check_media(struct port 
+@@ -367,7 +369,63 @@
  		}
  	}
  }
@@ -125,7 +123,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  
  static void mdio_thread(struct work_struct *work)
  {
-@@ -792,9 +850,12 @@ static int eth_ioctl(struct net_device *
+@@ -792,9 +850,12 @@
  
  	if (!netif_running(dev))
  		return -EINVAL;
@@ -140,7 +138,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  	return err;
  }
  
-@@ -947,7 +1008,8 @@ static int eth_open(struct net_device *d
+@@ -947,7 +1008,8 @@
  		}
  	}
  
@@ -150,7 +148,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  
  	memset(&msg, 0, sizeof(msg));
  	msg.cmd = NPE_VLAN_SETRXQOSENTRY;
-@@ -1107,10 +1169,8 @@ static int eth_close(struct net_device *
+@@ -1107,10 +1169,8 @@
  		printk(KERN_CRIT "%s: unable to disable loopback\n",
  		       dev->name);
  
@@ -163,7 +161,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  
  	if (!ports_open)
  		qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1120,6 +1180,42 @@ static int eth_close(struct net_device *
+@@ -1120,6 +1180,42 @@
  	return 0;
  }
  
@@ -206,7 +204,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  static int __devinit eth_init_one(struct platform_device *pdev)
  {
  	struct port *port;
-@@ -1192,20 +1288,7 @@ static int __devinit eth_init_one(struct
+@@ -1192,20 +1288,7 @@
  	__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
  	udelay(50);
  
@@ -228,11 +226,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  
  	INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
  	return 0;
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-@@ -95,12 +95,15 @@ struct sys_timer;
+--- a/include/asm-arm/arch-ixp4xx/platform.h
++++ b/include/asm-arm/arch-ixp4xx/platform.h
+@@ -95,12 +95,15 @@
  #define IXP4XX_ETH_NPEB		0x10
  #define IXP4XX_ETH_NPEC		0x20
  

target/linux/ixp4xx/patches-2.6.25/203-npe_driver_phy_reset_autoneg.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-@@ -322,8 +322,12 @@ static void phy_reset(struct net_device 
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -322,8 +322,12 @@
  	struct port *port = netdev_priv(dev);
  	int phy_id = port->mii[idx].phy_id;
  	int cycles = 0;
@@ -16,7 +14,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  
  	while (cycles < MAX_MII_RESET_RETRIES) {
  		if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-@@ -331,13 +335,23 @@ static void phy_reset(struct net_device 
+@@ -331,13 +335,23 @@
  			printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
  			       dev->name, cycles);
  #endif

target/linux/ixp4xx/patches-2.6.25/204-npe_driver_ixp43x_support.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, c
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -575,8 +575,8 @@
  		for (i = 0; i < image->size; i++)
  			image->data[i] = swab32(image->data[i]);
  
@@ -13,7 +11,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
  			  "IXP42x\n");
  		goto err;
  	}
-@@ -598,7 +598,7 @@ int npe_load_firmware(struct npe *npe, c
+@@ -598,7 +598,7 @@
  		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
  		  (image->id >> 8) & 0xFF, image->id & 0xFF);
  
@@ -22,10 +20,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
  		if (!npe->id)
  			instr_size = NPE_A_42X_INSTR_SIZE;
  		else
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
 @@ -32,6 +32,7 @@
  #include <linux/kernel.h>
  #include <linux/mii.h>
@@ -34,7 +30,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  #include <asm/arch/npe.h>
  #include <asm/arch/qmgr.h>
  
-@@ -1338,12 +1339,16 @@ static struct platform_driver drv = {
+@@ -1338,12 +1339,16 @@
  
  static int __init eth_init_module(void)
  {
@@ -55,11 +51,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
  
  	return platform_driver_register(&drv);
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/cpu.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/cpu.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/cpu.h
-@@ -34,6 +34,8 @@ static inline u32 ixp4xx_read_feature_bi
+--- a/include/asm-arm/arch-ixp4xx/cpu.h
++++ b/include/asm-arm/arch-ixp4xx/cpu.h
+@@ -34,6 +34,8 @@
  	val &= ~IXP4XX_FEATURE_RESERVED;
  	if (!cpu_is_ixp46x())
  		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
@@ -68,10 +62,8 @@ Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/cpu.h
  
  	return val;
  }
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
++++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
 @@ -628,11 +628,12 @@
  #define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
  #define IXP4XX_FEATURE_RESERVED		(0xFF << 24)

target/linux/ixp4xx/patches-2.6.25/210-npe_hss.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/wan/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/wan/Kconfig
-+++ linux-2.6.25.4/drivers/net/wan/Kconfig
-@@ -338,6 +338,15 @@ config DSCC4_PCI_RST
+--- a/drivers/net/wan/Kconfig
++++ b/drivers/net/wan/Kconfig
+@@ -338,6 +338,15 @@
  
  	  Say Y if your card supports this feature.
  
@@ -18,11 +16,9 @@ Index: linux-2.6.25.4/drivers/net/wan/Kconfig
  config DLCI
  	tristate "Frame Relay DLCI support"
  	---help---
-Index: linux-2.6.25.4/drivers/net/wan/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/wan/Makefile
-+++ linux-2.6.25.4/drivers/net/wan/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_C101)		+= c101.o
+--- a/drivers/net/wan/Makefile
++++ b/drivers/net/wan/Makefile
+@@ -42,6 +42,7 @@
  obj-$(CONFIG_WANXL)		+= wanxl.o
  obj-$(CONFIG_PCI200SYN)		+= pci200syn.o
  obj-$(CONFIG_PC300TOO)		+= pc300too.o
@@ -30,10 +26,8 @@ Index: linux-2.6.25.4/drivers/net/wan/Makefile
  
  clean-files := wanxlfw.inc
  $(obj)/wanxl.o:	$(obj)/wanxlfw.inc
-Index: linux-2.6.25.4/drivers/net/wan/ixp4xx_hss.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/drivers/net/wan/ixp4xx_hss.c
++++ b/drivers/net/wan/ixp4xx_hss.c
 @@ -0,0 +1,2886 @@
 +/*
 + * Intel IXP4xx HSS (synchronous serial port) driver for Linux

target/linux/ixp4xx/patches-2.6.25/294-eeprom_new_notifier.patch

@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/i2c/chips/eeprom.c
-+++ linux-2.6.25.4/drivers/i2c/chips/eeprom.c
+--- a/drivers/i2c/chips/eeprom.c
++++ b/drivers/i2c/chips/eeprom.c
 @@ -33,6 +33,8 @@
  #include <linux/jiffies.h>
  #include <linux/i2c.h>
@@ -11,7 +9,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
  
  /* Addresses to scan */
  static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
-@@ -41,26 +43,7 @@ static const unsigned short normal_i2c[]
+@@ -41,26 +43,7 @@
  /* Insmod parameters */
  I2C_CLIENT_INSMOD_1(eeprom);
  
@@ -39,7 +37,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
  
  static int eeprom_attach_adapter(struct i2c_adapter *adapter);
  static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
-@@ -197,6 +180,7 @@ static int eeprom_detect(struct i2c_adap
+@@ -197,6 +180,7 @@
  	data->valid = 0;
  	mutex_init(&data->update_lock);
  	data->nature = UNKNOWN;
@@ -47,7 +45,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
  
  	/* Tell the I2C layer a new client has arrived */
  	if ((err = i2c_attach_client(new_client)))
-@@ -224,6 +208,9 @@ static int eeprom_detect(struct i2c_adap
+@@ -224,6 +208,9 @@
  	if (err)
  		goto exit_detach;
  
@@ -57,7 +55,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
  	return 0;
  
  exit_detach:
-@@ -249,6 +236,41 @@ static int eeprom_detach_client(struct i
+@@ -249,6 +236,41 @@
  	return 0;
  }
  
@@ -99,10 +97,8 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
  static int __init eeprom_init(void)
  {
  	return i2c_add_driver(&eeprom_driver);
-Index: linux-2.6.25.4/include/linux/eeprom.h
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/include/linux/eeprom.h
++++ b/include/linux/eeprom.h
 @@ -0,0 +1,71 @@
 +#ifndef _LINUX_EEPROM_H
 +#define _LINUX_EEPROM_H
@@ -175,11 +171,9 @@ Index: linux-2.6.25.4/include/linux/eeprom.h
 +extern int unregister_eeprom_notifier(struct notifier_block *nb);
 +
 +#endif /* _LINUX_EEPROM_H */
-Index: linux-2.6.25.4/include/linux/notifier.h
-===================================================================
---- linux-2.6.25.4.orig/include/linux/notifier.h
-+++ linux-2.6.25.4/include/linux/notifier.h
-@@ -248,5 +248,8 @@ extern struct blocking_notifier_head reb
+--- a/include/linux/notifier.h
++++ b/include/linux/notifier.h
+@@ -248,5 +248,8 @@
  #define VT_WRITE		0x0003 /* A char got output */
  #define VT_UPDATE		0x0004 /* A bigger update occurred */
  

target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -125,6 +125,12 @@ config LEDS_GPIO
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -125,6 +125,12 @@
  	  outputs. To be useful the particular board must have LEDs
  	  and they must be connected to the GPIO lines.
  
@@ -15,10 +13,8 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig
  config LEDS_CM_X270
  	tristate "LED Support for the CM-X270 LEDs"
  	depends on LEDS_CLASS && MACH_ARMCORE
-Index: linux-2.6.25.4/drivers/leds/leds-latch.c
-===================================================================
 --- /dev/null
-+++ linux-2.6.25.4/drivers/leds/leds-latch.c
++++ b/drivers/leds/leds-latch.c
 @@ -0,0 +1,141 @@
 +/*
 + * LEDs driver for Memory Latched Devices
@@ -161,11 +157,9 @@ Index: linux-2.6.25.4/drivers/leds/leds-latch.c
 +MODULE_AUTHOR("Chris Lang <[email protected]>");
 +MODULE_DESCRIPTION("Latch LED driver");
 +MODULE_LICENSE("GPL");
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -19,6 +19,7 @@
  obj-$(CONFIG_LEDS_COBALT_QUBE)		+= leds-cobalt-qube.o
  obj-$(CONFIG_LEDS_COBALT_RAQ)		+= leds-cobalt-raq.o
  obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
@@ -173,11 +167,9 @@ Index: linux-2.6.25.4/drivers/leds/Makefile
  obj-$(CONFIG_LEDS_CM_X270)              += leds-cm-x270.o
  obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
  obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
-Index: linux-2.6.25.4/include/linux/leds.h
-===================================================================
---- linux-2.6.25.4.orig/include/linux/leds.h
-+++ linux-2.6.25.4/include/linux/leds.h
-@@ -136,5 +136,18 @@ struct gpio_led_platform_data {
+--- a/include/linux/leds.h
++++ b/include/linux/leds.h
+@@ -136,5 +136,18 @@
  	struct gpio_led *leds;
  };
  

target/linux/ixp4xx/patches-2.6.25/296-avila_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -132,6 +132,31 @@ static struct platform_device avila_pata
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -132,6 +132,31 @@
  	.resource		= avila_pata_resources,
  };
  
@@ -34,7 +32,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  static struct platform_device *avila_devices[] __initdata = {
  	&avila_i2c_gpio,
  	&avila_flash,
-@@ -159,6 +184,8 @@ static void __init avila_init(void)
+@@ -159,6 +184,8 @@
  
  	platform_device_register(&avila_pata);
  

target/linux/ixp4xx/patches-2.6.25/300-avila_fetch_mac.patch

@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
 @@ -14,10 +14,18 @@
  #include <linux/kernel.h>
  #include <linux/init.h>
@@ -35,7 +33,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  static struct flash_platform_data avila_flash_data = {
  	.map_name	= "cfi_probe",
  	.width		= 2,
-@@ -163,10 +178,160 @@ static struct platform_device *avila_dev
+@@ -163,10 +178,160 @@
  	&avila_uart
  };
  
@@ -196,7 +194,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  	avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
  	avila_flash_resource.end =
  		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-@@ -184,9 +349,28 @@ static void __init avila_init(void)
+@@ -184,9 +349,28 @@
  
  	platform_device_register(&avila_pata);
  

target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch

@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
 @@ -26,6 +26,7 @@
  # include <linux/eeprom.h>
  #endif
@@ -10,7 +8,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  #include <linux/i2c-gpio.h>
  
  #include <asm/types.h>
-@@ -172,6 +173,72 @@ static struct platform_device avila_npec
+@@ -172,6 +173,72 @@
  	.dev.platform_data	= &avila_npec_data,
  };
  
@@ -83,7 +81,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  static struct platform_device *avila_devices[] __initdata = {
  	&avila_i2c_gpio,
  	&avila_flash,
-@@ -182,6 +249,8 @@ static void __init avila_gw23xx_setup(vo
+@@ -182,6 +249,8 @@
  {
  	platform_device_register(&avila_npeb_device);
  	platform_device_register(&avila_npec_device);
@@ -92,7 +90,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  }
  
  #ifdef CONFIG_SENSORS_EEPROM
-@@ -189,6 +258,8 @@ static void __init avila_gw2342_setup(vo
+@@ -189,6 +258,8 @@
  {
  	platform_device_register(&avila_npeb_device);
  	platform_device_register(&avila_npec_device);
@@ -101,7 +99,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  }
  
  static void __init avila_gw2345_setup(void)
-@@ -199,22 +270,30 @@ static void __init avila_gw2345_setup(vo
+@@ -199,22 +270,30 @@
  
  	avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
  	platform_device_register(&avila_npec_device);
@@ -132,7 +130,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  }
  
  static void __init avila_gw2355_setup(void)
-@@ -225,11 +304,29 @@ static void __init avila_gw2355_setup(vo
+@@ -225,11 +304,29 @@
  
  	avila_npec_data.phy = 16;
  	platform_device_register(&avila_npec_device);
@@ -162,10 +160,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  }
  
  static struct avila_board_info avila_boards[] __initdata = {
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
+--- a/include/asm-arm/arch-ixp4xx/avila.h
++++ b/include/asm-arm/arch-ixp4xx/avila.h
 @@ -36,4 +36,6 @@
  #define AVILA_PCI_INTC_PIN	9
  #define AVILA_PCI_INTD_PIN	8

target/linux/ixp4xx/patches-2.6.25/302-avila_gpio_device.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -239,10 +239,28 @@ static struct platform_device avila_latc
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -239,10 +239,28 @@
  	.dev.platform_data	= &avila_latch_leds_data,
  };
  
@@ -32,10 +30,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  };
  
  static void __init avila_gw23xx_setup(void)
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
+--- a/include/asm-arm/arch-ixp4xx/avila.h
++++ b/include/asm-arm/arch-ixp4xx/avila.h
 @@ -39,3 +39,6 @@
  /* User LEDs */
  #define AVILA_GW23XX_LED_USER_GPIO	3

target/linux/ixp4xx/patches-2.6.25/303-avila_gw23x7_phy_quirk.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -294,6 +294,7 @@ static void __init avila_gw2345_setup(vo
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -294,6 +294,7 @@
  
  static void __init avila_gw2347_setup(void)
  {
@@ -10,7 +8,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  	platform_device_register(&avila_npeb_device);
  
  	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-@@ -338,6 +339,7 @@ static void __init avila_gw2355_setup(vo
+@@ -338,6 +339,7 @@
  
  static void __init avila_gw2357_setup(void)
  {
@@ -18,11 +16,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
  	platform_device_register(&avila_npeb_device);
  
  	avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-@@ -348,6 +348,14 @@ static void phy_reset(struct net_device 
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -348,6 +348,14 @@
  		return;
  	}
  
@@ -37,11 +33,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
  	/* restart auto negotiation */
  	bmcr = mdio_read(dev, phy_id, MII_BMCR);
  	bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-@@ -104,6 +104,8 @@ struct eth_plat_info {
+--- a/include/asm-arm/arch-ixp4xx/platform.h
++++ b/include/asm-arm/arch-ixp4xx/platform.h
+@@ -104,6 +104,8 @@
  	u8 txreadyq;
  	u8 hwaddr[6];
  	u32 phy_mask;

target/linux/ixp4xx/patches-2.6.25/310-gtwx5717_spi_bus.patch

@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
 @@ -29,6 +29,8 @@
  #include <linux/serial_8250.h>
  #include <linux/slab.h>
@@ -11,7 +9,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
  #include <asm/types.h>
  #include <asm/setup.h>
  #include <asm/memory.h>
-@@ -121,9 +123,41 @@ static struct platform_device gtwx5715_f
+@@ -121,9 +123,41 @@
  	.resource	= &gtwx5715_flash_resource,
  };
  

target/linux/ixp4xx/patches-2.6.25/311-gtwx5717_mac_plat_info.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -154,10 +154,37 @@ static struct platform_device gtwx5715_s
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+@@ -154,10 +154,37 @@
  	},
  };
  

target/linux/ixp4xx/patches-2.6.25/400-dmabounce.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/common/dmabounce.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/common/dmabounce.c
-+++ linux-2.6.25.4/arch/arm/common/dmabounce.c
-@@ -117,6 +117,10 @@ alloc_safe_buffer(struct dmabounce_devic
+--- a/arch/arm/common/dmabounce.c
++++ b/arch/arm/common/dmabounce.c
+@@ -117,6 +117,10 @@
  	} else if (size <= device_info->large.size) {
  		pool = &device_info->large;
  	} else {
@@ -13,11 +11,9 @@ Index: linux-2.6.25.4/arch/arm/common/dmabounce.c
  		pool = NULL;
  	}
  
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -236,6 +236,11 @@ config DMABOUNCE
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -236,6 +236,11 @@
  	default y
  	depends on PCI
  

target/linux/ixp4xx/patches-2.6.25/401-avila_pci_dev.patch

@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
+--- a/include/asm-arm/arch-ixp4xx/avila.h
++++ b/include/asm-arm/arch-ixp4xx/avila.h
 @@ -25,7 +25,7 @@
  /*
   * AVILA PCI IRQs